Cds Received Status Report Routing - Nokia PremiCell Manual

List of at commands

Table of Contents

<pid>

protocol identifier in integer format

<dcs>

SMS Data Coding Scheme

<sca>

service centre address

<typesca> type of service centre address, 129 for normal and 145

for

international access (number contains '+' character)

4.7 +CDS Received Status Report Routing

This response is used to carry a received short message status report

to the DTE when direct routing has been activated with the AT+CN-

command. The response +CDS:<length><CR><LF><pdu> is used

when PDU mode is enabled, and +CDS: <fo>,<mr>,[<addr>],

[<type>], <scts>,<dt>,<st> when text mode is used.

<length> length of the actual PDU in octets

<pdu>

service centre address followed by GSM 03.40 Protocol

Data Unit in hexadecimal format

<fo>

first octet of SMS-STATUS-REPORT in integer format

<mr>

message reference

<addr>

receiver address

<type>

type of receiver address, 129 for normal and 145 for

international access (number contains '+' character)

<scts>

service centre time stamp

<dt>

discharge time

<st>

status

Table of Contents