Advertisement
Quick Links
PART #368507
OPERATING AND INSTALLATION INSTRUCTIONS
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
Contact this factory, the factory representative or Eagle's authorized service center in your area to
This unit has been manufactured in accordance with Underwriters Laboratories and NSF International
standards, consult local electrical and sanitation codes for compliance. Please reference the electrical
specifications in this manual to insure that proper amperage and voltage is used for your application. Built-in
Thank you for purchasing our high quality Eagle heated drawer. Please inspect the unit for
any damage before and after unpacking. If any damage is found, please contact the delivering
carrier immediately.
• To unpack the heated drawer, first remove the four 3/8-16 bolts, using a wrench, that secure the unit
to the crate located on the underside of the crating (freestanding unit only).
• Carefully remove the crating from the unit so as to not damage the unit.
• Remove all clear plastic wrap from the exterior of the unit.
• Remove any tape or adhesive that may be holding the drawers closed.
• Please remove any warranty or instruction information from the drawers prior to use and store in
safe location for future reference.
• Remember to properly sanitize and clean the unit before use.
Read all instructions carefully before installing and operating the product.
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
Pass-Through Heated Drawers
SAVE YOUR BOX AND ALL PACKING MATERIALS.
Retain this manual for future reference.
perform maintenance and repairs.
units must be installed in compliance with the NEC.
UNPACKING INSTRUCTIONS
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
®
CAUTION
EG10091
Revised 06/08
Advertisement
Summary of Contents for Eagle DWP-1R-120
- Page 1 YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED. Retain this manual for future reference. Contact this factory, the factory representative or Eagle’s authorized service center in your area to perform maintenance and repairs. This unit has been manufactured in accordance with Underwriters Laboratories and NSF International standards, consult local electrical and sanitation codes for compliance.
- Page 2 REPLACEMENT PARTS LISTING Item # Part Description Part # Part # 120V Model 240V Model THERMO CONTROL KNOB 301986 901986 4˝ PLASTIC LEG 303777 303777 THERMOSTAT 120-250V 331153 331153 331160 331160 THERMOMETER 331214 331214 KNOB (PLASTIC) 331218 331218 DRAWER PULL 12.812 331221 331221 INDICATOR LIGHT...
- Page 3 PLUG CONFIGURATIONS Freestanding Units All freestanding units are factory supplied with a cord and plug. Please check to make sure that the plug matches the receptacle: 1) 120V units supplied with a NEMA 5-15P plug configurations. 2) 240V units supplied with a NEMA 6-15P plug configurations. CAUTION! FOR FREESTANDING UNITS, ONLY PLUG UNIT INTO A RECEPTACLE OF COMPATIBLE VOLTAGE AND PLUG CONFIGURATION.
- Page 4 • 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com • Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100 • Fax: 302/653-2065 Eagle Foodservice Equipment, Eagle MHC, SpecFAB ® , and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group...