Page 1 Satellite User’s Guide If you need assistance: Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 170 in this guide. Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 2 AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's monitor port, USB port, PS/2 port microphone jack.
Page 4: Telephone Company Procedures
Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada. FCC requirements The following information is pursuant to FCC CFR 47, Part 68 and refers to internal modems.
Page 5: If Problems Arise
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 Instructions for IC CS-03 Certified Equipment NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.
Page 7: Wireless Interoperability
Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision A/B), as defined and approved by the Institute of Electrical and Electronics Engineers.
Page 8: Regulatory Information
Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9 Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC with essential test suites as per standards: EN 60950 Safety of Information Technology equipment ETS 300 328 Technical requirements for radio equipment ETS 300 826 General EMC requirements for radio equipment.
Page 10 This device must accept any interference that may cause undesired operation. TOSHIBA is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this TOSHIBA Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by TOSHIBA.
Page 11 Caution: Exposure to Radio Frequency Radiation The Toshiba Wireless LAN Mini PCI Card will be installed with one of two types of antennas. The both of antenna types, when installed are located at the upper edge of the LCD screen.
Page 12 The interference range of this equipment is less than 40m. This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday:10:00 – 17:00 Toll Free Tel: Direct Dial:...
Page 13: Device Authorization
Consult the dealer or an experienced radio/TV technician for help. Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card, or the substitution or attachment of...
Page 14 The correction of interference caused by such unauthorized modification, substitution or attachment will be the responsibility of the user. NOTE The following information is dependent on what type of wireless device is in your computer. Approved Countries/Regions for use for the Atheros AR5001X Mini PCI Wireless network adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 15 Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 16: Bluetooth Wireless Technology Interoperability
Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in...
Page 17: Bluetooth Wireless Technology And Your Health
LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth™ cards from TOSHIBA, always change the frequency, move your PC to the area outside of the interference range of 2.4 GHz Wireless LAN devices (40 meters/43.74 yards or more) or stop transmitting from your PC.
Page 18: Regulatory Statements
Caution: Exposure to Radio Frequency Radiation The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card...
Page 19 TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized. In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled environment, the Bluetooth™ Card from TOSHIBA has to be operated while maintaining a minimum body to antenna which are located on top of LCD distance of 20 cm.
Page 20 Using this equipment in Japan In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification systems (premises radio station and specified low-power radio station). 1.
Page 21 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916 Fax: 03-5444-9450 Device Authorization This device obtains the Technical Regulation Conformity Certification, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law of Japan.
Page 22 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 23 ConfigFree is a trademark of Toshiba Corporation. Wi-Fi is a registered trademark of the Wireless Capability Ethernet Alliance. Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby and the double-D symbol are trademarks of Dolby Laboratories. TouchPad is a trademark of Synaptics, Inc.
Page 24 Computer disposal information This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org.
Page 25: Table Of Contents
Keeping yourself comfortable ...39 Other precautions ...42 Setting up your computer ...44 Setting up your software...45 Registering your computer with Toshiba ...46 Adding external devices ...46 Connecting to a power source ...47 Charging the main battery...50 Using the computer for the first time ...51 Opening the display panel ...51...
Page 26 Contents Using the TouchPad™...52 Scrolling with the TouchPad™ ...53 Using the Control buttons ...53 Disabling or enabling the TouchPad ...54 Installing additional memory (optional) ...55 Removing a memory module...59 Using an external keyboard...61 Using a mouse ...61 Connecting a local printer ...61 Connecting an optional external diskette drive...62 Connecting external speakers or headphones...63 Connecting a microphone ...63...
Page 27 Powering down the computer ...93 Using the Turn off computer or Shut down Using Hibernation Mode ...96 Using Standby Mode...98 Toshiba’s online resources ...100 Using your computer at the office...101 Using a computer lock ...101 Caring for your computer...102 Cleaning the computer ...102 Moving the computer...103...
Page 28 Contents Power management ...105 Using additional batteries ...106 Charging the batteries...106 Maximizing battery life ...107 Charging the main battery...108 Charging the RTC battery...109 Monitoring battery power ...110 Determining remaining battery power...111 Conserving battery power ...113 Power profiles in Windows XP...114 Using a hot key to set the power profile...114 Additional options for power...115 What to do when the battery runs low ...115...
Page 29 Inserting an SD™ Card...149 Removing an SD™ Card...149 Connecting your modem to a telephone line...150 Connecting to a phone line ...150 Using the Wi-Fi Chapter 6: Toshiba Utilities...153 Fn-esse Starting Fn-esse Using the keyboard or pointing device to Viewing existing key assignments ...157 Internet ...138...
Page 30 Network ...159 Security...159 Power Management ...159 Mouse utility ...161 Hotkey utility ...161 Toshiba Hardware Settings ...162 Toshiba Picture Enhancement Utility ...164 CD/DVD Drive Acoustic Silencer ...164 Enabling Hibernation...165 Setting user passwords ...165 Using an instant password...166 Setting a user password ...167 Disabling a user password...167...
Page 31 Display modes ...204 Display brightness ...204 Disabling or enabling the TouchPad ...205 Keyboard hot keys ...205 Appendix B: Power Cable Connectors... 206 Appendix C: Using ConfigFree™ with your Toshiba Computer... 207 Getting Started...208 ConfigFree Main Screen ...208 Starting ConfigFree ...209 Configuring ConfigFree ...209...
Page 32 Contents Device Settings ...211 Profile Settings ...213 Quick Connect...214 Using Auto Switch ...215 Auto Switch (Cable Disconnect)...216 Auto Switch (SSID)...216 Glossary...217 Index...232...
Page 33: Introduction
Introduction Welcome to the world of powerful, portable multimedia computing. With your Toshiba notebook computer, your work can accompany you wherever you go. ® Satellite M35 Series computers provide considerable computing power, enabling you to perform the most demanding computing tasks from any location.
Page 34: This Guide
Toshiba's Web site at While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/ component/options availability are all subject to change without notice.
Page 35: Safety Icons
Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Page 36: Other Icons Used
This electronic user’s guide. Guides for other programs that may come preinstalled on your computer or that are available for installation on your Recovery media. For accessory information, visit Toshiba's Web site at accessories.toshiba.com. The Microsoft documentation, which explains the features of the operating system.
Page 37: Service Options
Introduction Service options Service options Toshiba offers a full line of service options built around its SelectServ limited warranty programs. To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com.
Page 38: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your computer. Selecting a place to work Your computer is designed to be used in a variety of locations and situations.
Page 39: Keeping Yourself Comfortable
Equipment that generates a strong electromagnetic field, such as stereo speakers (other than the speakers that are connected to the computer) or speakerphones. Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters.
Page 40: Seating And Posture
Getting Started Selecting a place to work twisting your torso or neck and look at the screen without slouching. If you use an external monitor, the top of the screen should be no higher than eye level. If you use a paper holder, set it at the same height and distance as the screen.
Page 41 extra back support. Lower-back-support cushions are available at many office supply stores. Sit with your back straight so that your knees, hips, and elbows form approximately 90-degree angles when you work. Do not slump forward or lean back too far. Lighting Proper lighting can improve the readability of the display and reduce eyestrain.
Page 42: Other Precautions
Getting Started Other precautions into your working day. Finding ways to break up the routine can reduce stress and improve your efficiency. Take frequent, short breaks to change position, stretch your muscles, and relieve your eyes. A break of two or three minutes every half hour is more effective than a long break after several hours.
Page 43 Getting Started Other precautions Be careful when you remove a PC Card that has been used for a long period. Avoid spilling liquids into the computer’s keyboard. If you do spill a liquid that gets into the keyboard, turn off the computer immediately. Leave the computer turned off overnight to let it dry out before you use it again.
Page 44: Setting Up Your Computer
Getting Started Setting up your computer Setting up your computer TECHNICAL NOTE: You must complete all set up steps up to “Setting up your software” on page 45 or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC Cards.
Page 45: Setting Up Your Software
A window displays, asking if you wish to register with Toshiba and Microsoft. Click Yes to register, or No to exit the process. If you click No, you may register with Toshiba by clicking the NOTE Register with Toshiba icon on the desktop.
Page 46: Registering Your Computer With Toshiba
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba Web site at www.register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.
Page 47: Connecting To A Power Source
Install PC Cards (see on page Connecting to a power source Your computer requires power to operate. Use the power cable and AC adapter to connect the computer to a live electrical outlet, or to charge the computer’s battery. Sample power cable and AC adapter Hold the power cable by its plug when you connect/disconnect it.
Page 48 Connecting to a power source Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter.
Page 49 Sample connecting the AC adapter to the computer Connect the power cable to a live electrical outlet. Damaged power cables can cause fire or electric shock. Never modify, forcibly bend, place heavy objects on top of, or apply heat to the power cable. If the power cable becomes damaged or the plug overheats, discontinue use.
Page 50: Charging The Main Battery
Getting Started Charging the main battery Charging the main battery To charge the main battery, plug the computer into a live wall outlet. It takes several hours to charge the battery with the computer off. It takes much longer to charge the battery while the computer is on.
Page 51: Using The Computer For The First Time
Using the computer for the first time Opening the display panel Slide the display latch to the right and lift the display panel Sample opening the display panel To avoid damaging the display panel, do not force it beyond the point where it moves easily. Never lift or move the computer using the display panel.
Page 52: Using The Touchpad
Getting Started Using the TouchPad™ When you turn on the computer for the first time, do not turn NOTE off the power again until the operating system has loaded completely. Sample turning on the power The preinstalled operating system loads automatically. Never turn off the computer while any drive is in use.
Page 53: Scrolling With The Touchpad
To move the cursor to the right side of the page, slide your finger across the TouchPad from left to right. To move it to the left side, slide your finger from right to left. Because the TouchPad is much smaller than the display NOTE screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad...
Page 54: Disabling Or Enabling The Touchpad
Getting Started Using the TouchPad™ Disabling or enabling the TouchPad The TouchPad is enabled by default. To change the enable/ disable TouchPad setting: Click Start, then click Control Panel. The Control Panel window appears. Click Printers and Other Hardware. Click the Mouse icon. Click the TouchPAD ON/OFF tab.
Page 55: Installing Additional Memory (Optional)
Toshiba Web site at accessories.toshiba.com). There are two memory slots. Your system may have both slots occupied.
Page 56 Getting Started Installing additional memory (optional) To avoid damaging the computer’s screws, use a standard Phillips no. 1 screwdriver that is in good condition. The computer has two memory module slots—Slot A and Slot B. You can install one or two memory modules. If the computer is on, begin at step 1;...
Page 57 Installing additional memory (optional) Using a standard Phillips no. 1 screwdriver, unscrew the captive screws that secure the memory module slot cover, then remove the memory module slot cover. Sample removing the memory module slot cover Place the memory module slot cover in a safe place so that you can retrieve it later.
Page 58 Getting Started Installing additional memory (optional) Do not force the memory module into position. The memory module should be level when secured in place. Sample inserting the memory module into the slot The clips on either side of the memory module click to secure the memory module.
Page 59: Removing A Memory Module
Removing a memory module Complete steps (optional)’” to shut down the computer and open the memory module cover. Do not try to remove a memory module with the computer turned on. You can damage the computer and the device. Do not remove the memory module while the computer is in Standby mode.
Page 60 Getting Started Installing additional memory (optional) Sample removing the memory module Replace the memory module slot cover and fasten the screw. Turn the computer over and restart it. Checking total memory When you add or remove memory, you can check that the computer has recognized the change.
Page 61: Using An External Keyboard
Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer. The computer’s USB port supports any USB- compatible keyboard. Using a mouse You may want to use a mouse instead of the computer’s built- in TouchPad.
Page 62: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive You must supply the proper printer cable. If one did not come NOTE with your printer, you may purchase one from an electronics or computer store. These instructions assume you have a USB printer, consult the document that came with your printer.
Page 63: Connecting External Speakers Or Headphones
Connecting external speakers or headphones To connect an optional external USB diskette drive, connect the cable to one of the USB ports. Sample connecting an optional external USB diskette drive Connecting external speakers or headphones To attach an external stereo output device: Locate the headphone jack near the front of the right side of the computer.
Page 64: Turning Off The Computer
Getting Started Turning off the computer Turning off the computer It is a good idea to turn off your computer when you are not using it for a while. If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge the main battery.
Page 65: Closing The Display Panel
Closing the display panel When you are finished, shut the computer down and close the display panel to keep dust and dirt out of the computer. If you close the computer while it is still on, these actions will occur: If you have the LCD power-saver feature set, the LCD panel will automatically turn off until you open it again.
Page 66: Connecting The Display Device
To connect a device to the S-video port, you’ll need to purchase a cable. For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately 6 meters). Using a poor-quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video.
Page 67 To connect the device: Connect one end of the video cable to the external video device. Refer to the documentation provided with the device for the location of its video-in port. Connect the other end of the video cable to the video-out port on the left side of the computer.
Page 68: Directing The Display Output When You Turn On The Computer
Getting Started Using external display devices Directing the display output when you turn on the computer Once you’ve connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key ( Press While holding down...
Page 69: Adjusting The Quality Of The External Display
Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps. TECHNICAL NOTE: To use one of the simultaneous modes, you must set the resolution of the internal display panel to match the resolution of the external display device.
Page 70: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 71 Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 72: Using The Keyboard
Learning the Basics Using the keyboard Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: The space bar creates a space character instead of just passing over an area of the page.
Page 73: Ctrl, Fn, And Alt Keys
programs assign separate functions to the right and left keys, or to the regular and numeric pad the full-sized keyboard. Using the these separate keys, as follows: Press the right side of the enhanced keyboard. Press on the numeric pad of the enhanced keyboard. Ctrl, Fn, and Alt keys Ctrl Sample Ctrl, Fn, and Alt keys...
Page 74: Windows ® Special Keys
Learning the Basics Using the keyboard ® Windows special keys Sample Windows Your computer’s keyboard has two keys that have special functions in Windows: Start key—Opens the Start menu Application key—Has the same function as the secondary mouse button Overlay keys Sample numeric and cursor control overlay The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay.
Page 75: Using The Overlay To Type Numeric Data
Using the overlay to type numeric data To turn the numeric overlay on, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on.
Page 76: Starting A Program
Learning the Basics Starting a program To turn off the cursor control overlay, hold down the and press keyboard indicator panel goes out. Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows If you prefer to open the program first, you have four options.
Page 77: Starting A Program From Windows Explorer
WordPad opens. To close the program, click the Close button in the upper-right corner of the program’s window. Starting a program from Windows If a program is not listed in the Programs menu, you can start it from Windows view of your computer’s contents as a hierarchy or “tree.” You can easily see the content of each drive and folder on your computer.
Page 78: Starting A Program From The Run Dialog Box
Learning the Basics Starting a program To close the program, click the Close button in the upper-right corner of the program’s window. Starting a program from the Run dialog box This example uses the Run command to start WordPad: Click Start, then click Run. The Run dialog box appears.
Page 79: Saving Your Work
Saving your work Before you turn off the computer, save your work to the hard disk drive. Always save your data even when you are using the Stand by. If your battery fully discharges, your information will be lost. Your computer can be configured to warn you when the battery is running low, see Many programs offer a feature that saves documents at regular intervals, such as every 15 minutes.
Page 80: File Names
Learning the Basics Saving your work Choose the drive and folder where you want your file to be stored. Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 81: Printing Your Work
Printing your work Verify that the Windows your printer as described in TECHNICAL NOTE: You only need to set up the printer the first time you connect it. If you use more than one printer or are changing printers, you will need to set up the operating system to run with the additional printer(s).
Page 82: Backing Up Your Files
Learning the Basics Backing up your files Backing up your files Backing up your files means copying individual files to media, such as CD, or copying entire sections of your hard disk to another device, such as a tape drive. For those systems with a floppy disk drive, you may back up file to a floppy disk as follows: To back up to a CD or other media, insert the media into...
Page 83: Using The Dvd-Rom Or Multi-Function Drive
Using the DVD-ROM or multi-function drive Using the DVD-ROM or multi-function drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform. These features include wide-screen movies, multiple language tracks, digital surround sound, multiple camera angles, and interactive menus.
Page 84: Drive Components And Control Buttons
Learning the Basics Using the DVD-ROM or multi-function drive Drive components and control buttons The DVD-ROM or multi-function drive resides at the bottom- right side of the computer. The CD/DVD control buttons are located at the front edge of the computer and can be accessed when the display panel is closed or open.
Page 85: Cd/Dvd Control Buttons
Using the DVD-ROM or multi-function drive CD/DVD control buttons The control buttons on the front edge of the computer let you play audio CDs when the computer is on. You can also use them to play CDs and DVDs when the computer is on. Mode Sample CD/DVD control buttons on the front of the computer The mode button switches between the CD/DVD and digital...
Page 86: Inserting A Disc
Learning the Basics Using the DVD-ROM or multi-function drive Inserting a disc Before playing an audio CD, turn the volume down. Playing the compact disc at maximum volume could damage your ears. To turn the volume down, use the Volume Control switch or access the Volume Control program (click Start, All Programs, Accessories, Entertainment, Volume Control).
Page 87 Using the DVD-ROM or multi-function drive Hold the disc by its edges and check that it is clean and free of dust. Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its center hole and edge. If you handle the disc incorrectly, you could lose data.
Page 88: Viewing The Contents Of A Cd Or Dvd
Using the DVD-ROM or multi-function drive If you insert the disc incorrectly, it may jam the drive. If this happens, contact your Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 89: Removing A Disc With The Computer Off
Using the DVD-ROM or multi-function drive Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject button access hole. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
Page 90: Using Pc Cards
Learning the Basics Using PC Cards Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use. For information on inserting or removing a PC Card, see “Inserting and removing PC Cards”...
Page 91: Using Secure Digital™ (Sd™) Cards
Using Secure Digital™ (SD™) Cards If you do not already have a SD computer, you may do so following the procedures outlined “Inserting an SD™ Card” on page Important: Do not use the Copy Disk function for SD Cards. To copy data from one SD Card to another, use the following procedure: Format the target SD Card in the same format as the source SD Card.
Page 92: Connecting The Modem To A Phone Line
To stay current on the most recent software and hardware NOTE options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at accessories.toshiba.com. Connecting the modem to a phone line Your computer comes with a built-in modem. To use the modem, you must connect it to a standard voice-grade RJ-11 telephone line.
Page 93: Powering Down The Computer
Enter the phone number of your network connection and let the program dial the number. The computer connects with the network. Powering down the computer Pushing the power button before shutting down the Windows operating system could cause you to lose your work. Make sure the system indicator panel’...
Page 94 For more information about setting up hibernation, refer to “Using Hibernation Mode” on page Shutting down more quickly You can shut down the computer by pressing the power button. To use either of these methods, you first need to turn it on in Toshiba’s Power Saver utility.
Page 95 Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click on the Setup Action tab. Select the following from the drop-down lists. When I press the power button Set this option to Shutdown to have the computer shut down when you press the power button.
Page 96: Using Hibernation Mode
Learning the Basics Powering down the computer Starting again after Shut down To start the computer up again, press the power button until the on/off light changes to blue. If you shut down the computer by closing the display panel, you can start it again by opening the display panel.
Page 97: Starting Again From Hibernation Mode
Click the Toshiba Power Saver icon. Click the Setup Action tab. Select Hibernation for the options you want. When I press the power button Set this option to Hibernate so that the computer will go into Hibernation mode when you press the power button.
Page 98: Using Standby Mode
Learning the Basics Powering down the computer Using Standby Mode The Stand by puts the computer into a power-saving mode. Stand by holds the current state of the computer in memory so that, when you restart the computer, you can continue working from where you left off.
Page 99 To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click the Setup Action tab. Learning the Basics Powering down the computer ®...
Page 100: Toshiba's Online Resources
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Page 101: Using Your Computer At The Office
Using your computer at the office By connecting an external monitor, external full-size keyboard, and a mouse, you can work with your notebook as if it were a standard office computer. An external monitor or projector connects to the RGB (monitor) port.
Page 102: Caring For Your Computer
To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. “Running the computer on battery 104.
Page 103: Moving The Computer
Although your notebook computer is built to withstand reasonable shock and vibration, transport it in a carrying case for long trips. You can purchase a carrying case from your Toshiba dealer, through the accessories information packaged with your system, or visit Learning the Basics Caring for your computer accessories.toshiba.com...
Page 104: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods of time while traveling.
Page 105: Battery Notice
Toshiba Web site at accessories.toshiba.com. To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month until the battery is fully discharged.
Page 106: Using Additional Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com. To charge the main battery while it is in your computer, plug the computer into a live electrical outlet.
Page 107: Maximizing Battery Life
The main battery light ( being charged, and glows blue when it is fully charged. The battery may not start charging immediately under the following conditions: The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature.
Page 108: Charging The Main Battery
Mobile Computing Charging the batteries Charge the battery pack until the Battery LED glows blue. If you have extra battery packs, rotate their use. If you will not be using the system for an extended period, more than one month, remove the battery pack. Disconnect the AC adapter when the battery is fully charged.
Page 109: Charging The Rtc Battery
HINT: Once the battery is fully charged, we recommend that you operate your computer on battery power until the battery discharges completely. Doing this extends battery life and helps ensure accurate monitoring of battery capacity. Charging the RTC battery Your computer has an internal real-time clock (RTC) battery. The RTC battery powers the System Time Clock and BIOS memory used to store your computer’s configuration settings.
Page 110: Monitoring Battery Power
Mobile Computing Monitoring battery power It is seldom necessary to charge the RTC battery because it NOTE charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working. When Hibernation mode is enabled and the RTC battery is completely discharged, a warning prompts you to reset the real-time clock.
Page 111: Determining Remaining Battery Power
Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. The current power source and battery power remaining section displays the current charge state of the battery. The value displays as a percentage of remaining battery charge.
Page 112 Mobile Computing Monitoring battery power The Toshiba Power Saver Properties dialog box appears. Sample Toshiba Power Saver Properties Dialog Box The remaining battery charge is indicated on the top-left side of the dialog box. With repeated discharges and recharges, the battery’s capacity gradually decreases.
Page 113: Conserving Battery Power
Enable Standby or Hibernation, which saves power when you turn off the computer and turn it back on again. Use Toshiba’s power-saving options. These power-saving options control the way in which the computer is configured. By using them, you can greatly increase the length of time you can use the computer before you need to recharge the battery.
Page 114: Power Profiles In Windows Xp
Mobile Computing Monitoring battery power Toshiba has combined these options into preset power usage modes. Power profiles in Windows XP In Windows profile or select your own combination of power management options. To do this: Open the Start menu, click Control Panel, then Performance and Maintenance.
Page 115: Additional Options For Power
Depending on the amount of time you spend away from external power sources, the capacity of one battery pack may be sufficient for your needs. However, if you need more portable power, Toshiba provides these options: Purchase extra battery packs. Purchase a battery charger that charges one main battery pack and one secondary battery pack at a time.
Page 116: What To Do When The Battery Alarm Sounds
To change the default alarm settings: Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click the Setup Action tab. Select the Alarm settings in the Setup Alarm section. Before your computer runs out of battery power, save your data and take one of the following actions: Suspend or shut down your computer.
Page 117: Removing The Battery From The Computer
When handling a battery, be careful not to drop it or short- circuit its terminals. Also, do not drop, hit, or otherwise impact the battery. Do not scratch or break the casing and do not twist or bend the battery pack. Do not remove the battery pack while the computer is in Standby mode.
Page 118 Mobile Computing Changing the main battery With the battery release latch held down, pull the discharged battery out from the back of the computer. Sample removing the discharged battery pack If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in Wipe the terminals of the charged battery with a clean...
Page 119: Inserting The Battery In The Computer
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them. Under federal, state, and local laws, it may be illegal to dispose of old batteries by placing them in the trash.
Page 120: Traveling Tips
Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, and compact discs. Contact your authorized Toshiba representative for more information.
Page 121: Chapter 4: Expansion Options
You can connect any of these optional devices: Expansion memory modules Standard 101-key keyboard Mouse or trackball Printer PC Cards Some of these devices listed are Toshiba devices, others are standard computer components.
Page 122: Connecting External (Optional) Devices
Expansion Options Using an external keyboard The devices manufactured by Toshiba can be purchased through Toshiba’s Web site: accessories.toshiba.com, or through the accessories information packaged with your computer. Connecting external (optional) devices You can connect an external monitor through the Video-out port on the back of your computer.
Page 123: Setting Up Your Printer
Otherwise, you can purchase one from a computer or electronics store. Setting up your printer Setting up a printer involves selecting a printer driver. This special program acts as a translator that turns your document into a form the printer can understand. If you are using any non-Windows driver for each of those programs.
Page 124 Expansion Options Using a printer Click Add Printer. The Add Printer Wizard appears. Sample Add Printer Wizard dialog box Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the Windows You can ignore the remainder of this section.
Page 125 Select the port settings according to the instructions in your printer’s documentation and the port to which your printer is connected, then click Next. The wizard prompts you to select your printer. From the list of manufacturers and printers, select your printer, then click Next.
Page 126 Expansion Options Using a printer TECHNICAL NOTE: Some printers require a specific installation process. In this case, the Windows system Add Printer Wizard will display an error message. If this happens, refer to your printer installation guide for further instructions. ®...
Page 127: Chapter 5: Enhancing Productivity
Chapter 5 Enhancing Productivity In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in ® the Windows system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 128: Finding Your Way Around The Desktop
Enhancing Productivity Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Icons Start button Sample Windows Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 129: Start Button
The icons initially displayed on your system desktop include: Recycle Bin—Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin.
Page 130: System Tray
Enhancing Productivity Exploring the desktop Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 131: Setting Up For Communications
Setting up for communications To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: A modem (one comes with your Satellite computer) A telephone line A browser or communications program An Internet Service Provider (ISP) or online service if you plan to use the Internet Determining the COM port...
Page 132: Connecting The Modem To A Telephone Line
Enhancing Productivity Setting up for communications To verify that the modem is set up properly, select the modem you wish to check, and then click Properties to bring up the dialog box with information specific to that modem. Click the Diagnostics tab, and then click Query Modem. Windows XP communicates with the modem and displays identifying information reported by the modem.
Page 133 To avoid this delay, you can reconfigure Windows to disable the LAN port. TECHNICAL NOTE: You can also use ConfigFree to reconfigure Windows to disable the LAN port. For procedures, “Using ConfigFree™ with your Toshiba Computer” on page 207. To disable the LAN port: Click Start, click Control Panel, then Performance and Maintenance.
Page 134: An Overview Of Using The Internet
Enhancing Productivity An overview of using the Internet Click the System icon, then click the Hardware tab, and then click the Device Manager button. Select Intel Network adapters. Click Actions. Select the Properties icon. Select the Do not use this device (disable) option from the Device usage drop-down.
Page 135: The Internet
The Internet The World Wide Web Internet Service Providers Connecting to the Internet Surfing the Internet Internet features Uploading and downloading files from the Internet The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by communications lines.
Page 136: Connecting To The Internet
Enhancing Productivity An overview of using the Internet You can connect to the Internet by using a telephone and modem or through other higher-speed communication methods such as Digital Subscriber Lines (DSL), cable, and satellite links. Connecting to the Internet To connect to the Internet, you need: A modem and telephone line, or a LAN connection A Web browser...
Page 137: Internet Features
To visit a desired Web site, type the Web address. The Web address, or Uniform Resource Locator (URL), is a unique identifier for that computer system linked to the Internet. Web addresses can also appear within a Web page’s text, and are known as links.
Page 138: Uploading And Downloading Files From The Internet
Enhancing Productivity Exploring audio features Uploading and downloading files from the Internet Transferring files from one computer to another is termed uploading (transferring data from your computer to a site on the Web), or downloading (transferring data from a site on the Web to your computer).
Page 139 To access the Windows Media through the Start menu or activate it from the taskbar. When using Windows Media Player, your system may not be NOTE able to activate Standby or Hibernation modes. To prevent this from occurring, close Windows Media Player before you select Standby or Hibernation mode.
Page 140: Playing Cds Using Auto-Run
Enhancing Productivity Exploring audio features Playing CDs using Auto-Run If you insert a CD into the DVD-ROM/multi-function drive and the Auto-Run feature does not automatically start your disk, try launching the CD manually. To do this, follow these steps: Open the Start menu and select My Computer. Click the DVD-ROM/multi-function drive icon.
Page 141: Using A Microphone
DEFINITION: A .wav (pronounced “wave”) file is a Windows format for storing sound. TECHNICAL NOTE: If you record MP3 files, you will only be able to play them on a device capable of playing MP3 files. Using a microphone Connect an external microphone to the computer. Click Start, point to All Programs, Accessories, Entertainment, then click Sound Recorder.
Page 142 Enhancing Productivity Exploring audio features Sound Recorder can only record 60 seconds at a time. NOTE To hear what you just recorded, click the Play button. To save the file, select Save from the File menu. Adjusting recording quality The better the quality of the recording, the more disk space the sound file requires.
Page 143: Using External Speakers Or Headphones
Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers. TECHNICAL NOTE: Use amplified speakers that require an external power source.
Page 144: Inserting And Removing Hard Drives
Enhancing Productivity Inserting and removing hard drives As with USB ports, the i.LINK Play (automatic configuration) and hot swapping (the ability to connect and disconnect devices while the computer is on). The main difference between i.LINK that i.LINK Inserting and removing hard drives Your Satellite Depending upon the original hard drive installed in your computer, you may wish to increase storage capacity by...
Page 145 Inserting and removing hard drives Lift the edge of the hard drive cover to remove it from the computer and expose the hard drive. Grasp the edge of the hard drive and pull it toward the edge of the computer, then lift it straight up to remove it. Sample removing the hard drive from the computer Install the new hard drive by setting it into the hard drive slot and sliding back toward the center of the computer...
Page 146: Inserting And Removing Pc Cards
Enhancing Productivity Inserting and removing PC Cards Inserting and removing PC Cards Your Satellite Card slot and supports two types of PC Cards: Type I cards—You can install one of these cards. Type II cards—You can install one of these cards. Inserting a PC Card Use caution when lifting or turning your computer.
Page 147: Removing A Pc Card
Insert the PC Card. Sample inserting a PC Card When the card is almost all the way into the slot, push firmly, but gently, to ensure a firm connection with the computer. Do not force the card into position. Removing a PC Card Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray.
Page 148: Setting Up A Pc Card For Your Computer
Enhancing Productivity Using SD™ Cards Sample ejecting a PC card The PC Card ejects slightly from the slot. Grasp the edges of the PC Card and slide it out of the slot. Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them.
Page 149: Inserting An Sd™ Card
Inserting an SD To insert an SD Turn the card so that the contacts (metal areas) are face down. Push the card into the slot until it locks in place. Sample inserting an SD Card Do not touch the SD expose the storage area to static electricity, which can destroy data.
Page 150: Connecting Your Modem To A Telephone Line
Send a fax directly from your computer. For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com. Connecting to a phone line Before you can communicate using the modem, you need to connect it to a telephone line.
Page 151 Connecting your modem to a telephone line Sample connecting the telephone cable to the modem port Connect the other end to the RJ-11 wall jack. Sample connecting to a wall jack The modem is designed for use with a standard analog telephone line.
Page 152: Using The Wi-Fi Wireless Lan Mini Pci Module
Your computer may have an integrated Wi-Fi Wireless LAN Mini PCI module. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Partner. For systems equipped with Wi-Fi, flip the wireless on/off switch to the On position.
Page 153: Chapter 6: Toshiba Utilities
Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the utilities supplied by Toshiba: Fn-esse® Hotkey utility TOSHIBA Console...
Page 154: Fn-Esse
“Hot Keys” on page You can assign any key that is not associated with a hot key or a keyboard overlay. Starting Fn-esse Click Start, point to All Programs, Toshiba Utilities, then click Fn-esse. The Fn-esse keyboard appears. Sample Fn-esse window ®...
Page 155 Fn-esse displays the Add/Edit Command dialog box with the Description, Command Line, and Working Directory fields automatically completed. Click OK to close the Add/Edit Command dialog box with your key assignment in place. Toshiba Utilities ® Fn-esse ® Explorer (or the program...
Page 156: Using The Keyboard Or Pointing Device To Assign Keys
Toshiba Utilities Fn-esse The program or document is now associated with the key you just selected. To open the program or document, press the appropriate key from within any Windows program. Using the keyboard or pointing device to assign keys...
Page 157: Viewing Existing Key Assignments
Changing or removing existing key assignments In the Fn-esse keyboard, click the key you wish to change with the secondary button. Fn-esse displays the Assignment Type dialog box. plus the appropriate key from within any ® program. Toshiba Utilities ® Fn-esse ®...
Page 158: Toshiba Console
To remove the key assignment, click Clear. TOSHIBA Console The TOSHIBA Console provides quick access to computer functions and allows you to customize a range of computer settings. To access the control panel: Click Start, then click All Programs.
Page 159: Customizing Your Computer
The Power Management feature enables you to control your computer’s power usage, regardless of the source, and use the many preset power modes, or create one yourself. To access Power Management through the TOSHIBA Console, double-click the Power Management icon. Toshiba Utilities...
Page 160 You can either use one of the preset modes or create and use your own customized profile. The preset profiles cannot be deleted. By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK, you can reconfigure that function. Any options that you change become effective when you click either OK or Apply.
Page 161: Mouse Utility
Mouse utility The Mouse utility allows you to change your TouchPad or mouse settings. To access the Mouse utility through the TOSHIBA Console, double-click the Mouse icon. Hotkey utility The hotkey utility allows you to receive a confirmation message when you use the hotkey combination for Standby...
Page 162: Toshiba Hardware Settings
Toshiba Utilities TOSHIBA Console To activate: Click Start, All Programs, Toshiba, Utilities, then click the Hotkey utility. The Toshiba Hotkey window appears. Sample Toshiba Hotkey utility window Select the desired option. Click OK. Toshiba Hardware Settings Toshiba Hardware Setup is the Toshiba configuration management tool available through Windows.
Page 163 Sample TOSHIBA HWSetup window The tabs represent various dialog boxes. They are: General—Allows you to view current BIOS, hard disk drive, and memory settings Display—Allows you to change various default settings for the built-in LCD display CPU—Allows you to change the dynamic CPU frequency mode Boot Priority—Allows you to change the sequence in...
Page 164: Toshiba Picture Enhancement Utility
Toshiba Utilities TOSHIBA Console Toshiba Picture Enhancement Utility The Toshiba Picture Enhancement utility allows you to adjust your computer screen to maximize the ambient surrounding light. To access the Toshiba Picture Enhancement Utility through the TOSHIBA Console, double-click the Picture Enhancement icon.
Page 165: Enabling Hibernation
Click Set Normal Mode to run the drive at normal speed, for transferring data. Enabling Hibernation Your computer includes a Toshiba Power Saver utility that allows you to change many of your default power settings. You can enable hibernation through this utility.
Page 166: Using An Instant Password
A power-on password—Prevents unauthorized users from starting or restarting the computer A supervisor password—Prohibits unauthorized users from accessing certain functions such as Toshiba Hardware Setup. This is useful if more than one person uses the computer. A single user password supports the instant and power-on password functions.
Page 167: Setting A User Password
Click Start, then click All Programs. Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. You may also press the TOSHIBA Console button to the left of the keyboard to open the TOSHIBA Console. The TOSHIBA Console window appears.
Page 168: Using A Supervisor Password
Click Start, then click All Programs. Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. You may also press the TOSHIBA Console button to the left of the keyboard to open the TOSHIBA Console. The TOSHIBA Console window appears.
Page 169: Deleting A Supervisor Password
Click Start, then click All Programs. Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. You may also press the TOSHIBA Console button to the left of the keyboard to open the TOSHIBA Console. The TOSHIBA Console window appears.
Page 170: Chapter 7: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 171 Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
Page 172: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start.
Page 173: The Windows ® Operating System Is Not Working
The Windows The computer displays the message. The computer was placed in Stand By mode and the battery has discharged. Data stored in the computer’s memory has been lost. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 174: Using Startup Options To Fix Problems
If Something Goes Wrong The Windows Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
Page 175: Internet Problems
The Windows TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet.
Page 176: Resolving A Hardware Conflict
If Something Goes Wrong Resolving a hardware conflict Then do one or both of the following: In the search field, type the topic of the problem with which you need help and follow the on-screen instructions. Click a problem about which you would like help from the listings and follow the on-screen instructions.
Page 177: Resolving Hardware Conflicts On Your Own
you add each device, test it to make sure it and all previously connected devices work. The device most recently connected to the system is the one most likely to be causing a hardware conflict. Resolving hardware conflicts on your own Computer components need resources to accomplish a task.
Page 178: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict Disable another system component and use its resources for the new device, see Manager” on page Reconfigure the device so that its requirements do not conflict. Refer to the device’s documentation for instructions about changing settings on the device.
Page 179 Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device. To check a device’s properties: Open the Start menu, then click Control Panel.
Page 180: Memory Problems
If Something Goes Wrong Resolving a hardware conflict Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: Click Start, then click Turn off computer. Click Turn Off. The operating system shuts down and turns off the computer automatically.
Page 181 The AC power light does not come on when you plug in the AC adapter and power cable. Make sure the AC adapter and power cable are firmly plugged into both the wall outlet and the computer. If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance.
Page 182: Keyboard Problems
If Something Goes Wrong Resolving a hardware conflict memory module, that takes its power from the battery? Is your software using the hard disk more? Is the display power set to turn off automatically? Was the battery fully charged to begin with? All these conditions affect how long the charge lasts.
Page 183 password, press the . If no password is registered, press Enter reactivates and allows you to continue working. If you are using the built-in screen, make sure the display priority is not set for an external monitor. To do this, hold the key and press pops up.
Page 184: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict Change the Colors option and click OK. For more information, see Windows A message tells you that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware.
Page 185 Sometimes a disk problem may cause one or more files to appear to have garbage in them. Typical disk problems are: You are having trouble accessing a disk, or one or more files appear to be missing. Make sure you are identifying the drive by its correct name (A: or C:).
Page 186 If Something Goes Wrong Resolving a hardware conflict Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software, which is available from your dealer.
Page 187: Dvd-Rom Or Multi-Function Drive Problems
DVD-ROM or multi-function drive problems You cannot access a disc in the drive. Make sure the drive tray has closed properly. Press gently until it clicks into place. Open the drive tray and remove the disc. Make sure the drive tray is clean.
Page 188: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict If you are using external headphones or speakers, check that they are securely connected to your computer. The computer emits a loud, high-pitched noise. This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud.
Page 189 information, or refer to the documentation that came with the PC Card. Some card manufacturers use special software called enablers to support their cards. Enablers result in nonstandard configurations that can cause problems when installing the PC Card. If your system does not have built-in drivers for your PC Card and the card did not come with an operating system driver, it may not work under the operating system.
Page 190 If Something Goes Wrong Resolving a hardware conflict Click the Device Manager button. Double-click the PCMCIA adapter. Double-click the appropriate PC Card. The operating system displays your PC Card’s Properties dialog box, which contains information about your PC Card configuration and status. The computer stops working (hangs) when you insert a PC Card.
Page 191: Printer Problems
If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section. Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on, and ready (online).
Page 192: Modem Problems
If Something Goes Wrong Develop good computing habits will print. Contact the software manufacturer for more information. Modem problems This section lists common modem problems: The modem will not receive or transmit properly. Make sure the cable from the modem to the telephone line is firmly connected to the computer’s modem port and the telephone line jack.
Page 193: Your Hard Disk
On a regular basis, back up the information stored on your hard disk. Here are some ways you can do this: Copy files to diskette, following the steps in work” on page Connect a tape drive to the system and use specialized software to copy everything on the hard disk to a tape.
Page 194: If You Need Further Assistance
Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. by selecting your particular product and...
Page 195: Contacting Toshiba
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. Toshiba voice contact Before calling Toshiba, make sure you have: Your computer’s serial number.
Page 196: Other Toshiba Internet Web Sites
If Something Goes Wrong Other Toshiba Internet Web sites Other Toshiba Internet Web sites toshiba.com computers.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux (Belgium) B.V.
Page 197 800-457-7777 (within the US) outside of the US 949-859-4273 ( this call may incur long distance charges) Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. 5249 6500 If Something Goes Wrong Toshiba’s worldwide offices...
Page 198 If Something Goes Wrong Toshiba’s worldwide offices The Netherlands Toshiba Information Systems Benelux B.V. Rivium Boulevard 41 2909 LK, Capelle a/d IJssel The Netherlands Papua New Guinea Fujitsu (PNG) Pty. Ltd. P.O. Box 4952 Boroko NCD, Papua New Guinea Portugal Quinta Grande Assisténcia Técnica...
Page 199 United States If Something Goes Wrong Toshiba’s worldwide offices United Kingdom Toshiba Information Systems (U.K) Ltd. Toshiba Court Weybridge Business Park Addlestone Road Weybridge KT15 2UL United Kingdom The Rest of Europe Toshiba Europe (I.E.) GmbH Hammfelddamm 8 D-4-1460 Neuss Germany...
Page 200: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 201: Instant Password Security
The power usage profiles are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. Sample power usage modes The properties of each mode are set in the Toshiba Power Management utility. For more information, see Computing” on page Hot Keys Instant password security 104.
Page 202: Stand By Mode
Hot Keys Stand By mode Stand By mode This hot key puts the computer into Stand By mode. A message box is displayed by default to confirm that the computer is going into Stand By mode. This message box can be set so it does not display.
Page 203: Hibernation Mode
Hibernation mode This hot key puts the computer into Hibernation mode. If Hibernation mode is enabled (the default), a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it does not display.
Page 204: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window o use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
Page 205: Disabling Or Enabling The Touchpad
Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. To use the TouchPad, see TouchPad” on page Sample disable and enable TouchPad windows Keyboard hot keys This hot key turns the cursor control overlay on and off. This hot key turns the numeric overlay on and off. This hot key turns the scroll lock feature on and off.
Page 206: Appendix B: Power Cable Connectors
Appendix B Power Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved United Kingdom...
Page 207: Computer
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities used for configuring networks that use both wired and wireless network devices. These utilities include the following: Connectivity Doctor—The Connectivity Doctor utility is used to help fix networking problems with your notebook computer.
Page 208: Getting Started
Getting Started Quick Connect—The Quick Connect utility is used to configure a wireless LAN connection (ad hoc connection) between a personal computer and a Toshiba Wireless Projector. The Toshiba Wireless Projector utility must be installed to enable Quick Connect. For more...
Page 209: Starting Configfree
Help—Displays the online help file. Starting ConfigFree To start ConfigFree, do any of the following: (Microsoft and then point to All Programs. Point to the TOSHIBA ConfigFree folder, and then click ConfigFree. Double-click the ConfigFree icon Click the ConfigFree icon click the desired utility.
Page 210: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ConfigFree Utilities Connectivity Doctor The Connectivity Doctor displays the connection configuration and the status of all wired and wireless LAN devices that are connected to the network. For wireless network devices, the signal strength and WEP (Wired Equivalent Privacy) key settings (if applicable) also display.
Page 211: Device Settings
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample Connectivity Doctor screen The Connectivity Doctor screen automatically refreshes. However, you can also use the Refresh button to refresh the screen. Device Settings The Device Settings screen displays a list of all wired, wireless, and infrared (for systems with infrared) devices that are connected to the network.
Page 212 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample viewing the device settings Network Connections—Displays the Network Connection window, which contains detailed information about the network connection. Enable/Disable—You can easily enable or disable any of the listed devices simply by selecting the desired device, and then clicking the Enable/Disable button.
Page 213: Profile Settings
Using ConfigFree™ with your Toshiba Computer Profile Settings The Profile Settings utility displays a list of all the registered profiles in ConfigFree. You can also add, modify, and delete profiles; switch the profile being used; and view specific details about each profile.
Page 214: Quick Connect
Toshiba Wireless Projector. As a result, you will not be able to use the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection will be broken and later re- established.
Page 215: Using Auto Switch
The wireless LAN configuration will return to the default settings under the following conditions: If the Toshiba Wireless Projector utility is closed. If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this will disconnect the wireless LAN connection).
Page 216: Auto Switch (Cable Disconnect)
Using ConfigFree™ with your Toshiba Computer Using Auto Switch From the Profile Settings screen, you can click the Auto Switch button. Auto Switch (Cable Disconnect) If a wired network cable is disconnected from the network, the Auto Switch (Cable Disconnect) option will automatically switch to another network device.
Page 217: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory complementary metal-oxide semiconductor...
Page 218 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE MIDI PCMCIA direct current direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table Federal Communications Commission...
Page 219 SCSI DDRAM SRAM SVGA Terms These terms may appear in this user’s guide. active-matrix display—A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 220 Glossary application—A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup—A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 221 byte—A sequence of eight bits. A byte is the smallest addressable unit of data. See also bit, gigabyte, kilobyte, megabyte. cache—A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache.
Page 222 Glossary controller—A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU—See central processing unit (CPU). CPU cache—A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs.
Page 223 disk—A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive—The device that reads and writes information and programs on a diskette or hard disk.
Page 224 Glossary DVD-ROM (digital versatile [or video] disc read-only memory)—A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM. emulation—A technique in which a device or program imitates another device or program.
Page 225 Compare software. Hibernation—A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 226 Glossary hot swapping—The ability to add or remove devices from a computer while the computer is running and have the operating system automatically recognize the change. icon—A small image displayed on the screen that represents a function, file, or program. interlaced—A method of refreshing a computer screen, in which only every other line of pixels is refreshed.
Page 227 local area network—See LAN. logical drive—A section of a disk that is recognized by the operating system as a separate disk drive. A system’s logical drives may differ from its physical drives. For example, a single hard disk drive may be partitioned into two or more logical drives.
Page 228 Glossary non-interlaced—A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen. Compare interlaced. non-system disk—A disk for storing programs and data that cannot be used to start the computer.
Page 229 port—A socket on the computer where you plug in a cable for connection to a network or a peripheral device. processor—See central processing unit (CPU). program—A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility.
Page 230 Glossary ROM (read-only memory)—Non-volatile memory that can be read but not written to. By non-volatile, we mean that information in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer’s BIOS, which is essential instructions the computer reads when you start it up.
Page 231 universal serial bus (USB)—A serial bus that supports a data transfer rate of up to 480 Mbps (480 million bits per second). USB can connect up to 127 peripheral devices through a single all-purpose USB port. USB allows hot swapping of peripherals. See also bus, hot swapping, serial.
Page 232: Index
Index Numerics 101-key keyboard 72 AC adapter 47 AC power cable connectors 206 accessories carrying cases 103 Add Printer Wizard 123 adjusting recording quality 142 Alt keys 73 arm/wrist strain 41 assign keys Fn-esse 156 audio .wav files 140 audio features 138 Auto-Run 140 avoiding injury 39 backing up files 71...
Page 233 CD and DVDs viewing contents 88 inserting 87 problem solving 187 channels DMA 177 IRQ 177 character keys 72 charging main battery 108 charging the battery 50 checking device properties 179 click 53 communications network connection 132 programs 92 setting up 91 system resources 177 via modem 92 compact discs...
Page 234 Index does not look normal/flickers external monitor not working latch 51 screen is blank 182 display device connecting 66 external 65 video 65 display modes hot key 204 display output settings 68 display panel closing 65 opening 51 display, external adjusting 69 disposal information 24 disposing of used batteries 119...
Page 235 assigning a key 154 using drag-and-drop 155 function keys 73 hardware conflicts 176 resolving 177 headphones connecting 63 using 143 Help Windows XP 175 Hibernation enabling 165 Hibernation mode 96 configuring 96 starting again from 97 Hibernation mode hot key 203 hot key display modes 204 functions 200...
Page 236 Index keyboard character keys 72 function keys 73 hot keys 205 not working 172 overlay keys 74 unexpected characters 182 Windows special keys 74 keyboard, external 61 keyboard, full-size 72 keyboard, PS/2-compatible LCD power-saver 65 lighting 41 main battery changing 116 removing 117 memory expansion slots 56...
Page 237 179 compact discs not running computer hangs when PC Card computer will not power up 172 contacting Toshiba 194 corrupted/damaged data files Device Manager 178 disabling a device 178 disk drive is slow 185...
Page 238 Index external keyboard not working external monitor 183 faulty memory 180 hardware conflict 176 high-pitched noise 188 illegal operation 171 Internet bookmarked site not found 175 Internet connection is slow 175 keyboard not responding 172 keyboard produces unexpected characters 182 missing files/trouble accessing a disk 185 modem...
Page 239 130 taskbar 130 telephone line television 65 Toshiba Toshiba Accessories Toshiba Console 158 Toshiba Hardware Setup 162 Toshiba online resources 100 Toshiba utilities 153 trademarks 23 traveling tips 120 turning off the computer 64 turning on the power 51...
Page 240 69 volume mute hot key 200 warranty SelectServ 37 Web sites 195 Support Online 176 Web sites,Toshiba 196 Wi-Fi wireless networking 132 Wi-Fi Mini PCI modules 152 Windows Explorer 77 Windows Media Player 138 Windows Start menu 76...

This manual is also suitable for:

M35-s456 Satellite m35 series

Toshiba M35-S4561 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Expansion Options

Chapter 5: Enhancing Productivity

Chapter 6: Toshiba Utilities

Chapter 7: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cable Connectors

Appendix C: Using Configfree™ with Your Toshiba

Quick Links

Related Manuals for Toshiba M35-S4561

Summary of Contents for Toshiba M35-S4561