Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions
and maintained properly, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to instruction
manual
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this trolley.
‰
Always load evenly with the centre of gravity of the load as near centre of the trolley as possible.
9
DO NOT overload the trolley - see specifications.
8
Use the trolley in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the trolley clean and tidy in accordance with good workshop practice.
9
DO NOT use the trolley for any purpose other than that for which it is designed.
8
DO NOT stand on the trolley, use it as a ladder or allow others to ride on the trolley.
8
Use the wheel locks to prevent the trolley from inadvertently moving.
9
DO NOT leave unattended, especially when loaded, unless the wheels are locked, chocked or the trolley otherwise secured.
8
DO NOT use trolley on uneven ground and do not run over curbs or steps - use a ramp.
8
DO NOT use trolley if any part is significantly damaged, paying particular attention to the wheels.
8
Keep children and unauthorised persons away from the work area.
9
2. INTRODUCTION
Ideal for regularly used workshop items such as body repair kits, power tools and bulky equipment too big for a tool chest. Strong build quality and
extra large castors also make this an excellent dismantling trolley for smaller vehicle components.
3. SPECIFICATION
Model No: ........................................................... CX105.V3 ....................................................... CX108.V3
Overall Size (W x D x H): .................................... 840 x 405 x 810mm ........................840 x 405 x 810mm
Shelf Size (W x D x H): ....................................... 790 x 400 x 80mm ............................790 x 400 x 80mm
Capacity: ............................................................. 100kg (50kg/level) ............................. 150kg (50kg/level)
4. ASSEMBLY
Fig.1
4.1.
Attach posts to trays.
4.1.1.
Lay one tray (the one with the four sets of castor holes on the
bottom) on the floor and attach posts to the outside corners
of the tray using 32 x M6 short bolt and nut sets.
© Jack Sealey Limited
INSTRUCTIONS FOR
2/3 LEVEL HEAVY DUTY WORKSHOP TROLLEY
CX105.V3 & CX108.V3
MODEL NO'S:
Original Language Version
fig.1
CX105.V3, CX108.V3 Issue:1 - 11/09/17
Advertisement
Related Manuals for Sealey CX105.V3
Summary of Contents for Sealey CX105.V3
- Page 1 CX105.V3 & CX108.V3 MODEL NO’S: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions and maintained properly, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...