Advertisement
Quick Links
NC1206
NC1206
NC1207
Item
120mm toothpick frame
NanoX F4FS V1.0 flight controller
Eachine NC1103 KV8500
HQPROP T65 bi-blade propeller
Caddx EOS2 v2 version 4:3
VTX: 5.8g 25mw~200mw switchable Whoop VTX
3.8v 460mah batter y
6in1 6-way LIPO/LIHV Charger
FS-I6 2.4G radio transmitter
Eachine VR009 5.8G 40CH goggles
Propeller disassemble tool
Screwdriver
LED&Buzzer PCB top board
M2*D3.5*L20 Aluminum Alloy column
Damping ball
Batter y mounted tray
1 Specification
Brand Name: Eachine
Item Name: NOVICE-II 1-2S Toothpick RTF & Fly more
Wheelbase: 120mm
Size: 100mm*100mm*40mm
Weight: 50g(without battery)
2 Features
Nano X F4 pro flight controller
Powerful and smoothly
Led Strip ready
Built-in Buzzer
New design 1103 KV8500 motors
Camera Angle adjustable
VTX power switchable 25mw~200mw
Smartaudio ready , change VTX bands, powers, channels via OSD
Ready to fly
Compatible both for 1s-2s Lipo/LIHV
120
43
NC1201
NC1203
NC1205
NC1204
NC1209
NC1208
NC1210
NC1211
NC1212
Par t No.
RTF
FLY More
NC1210
1
1
NC1204
1
1
NC1205
4
4
NC1206
2
2
NC1207
1
1
NC1203
1
1
NC1212
2
10
1
1
1
1
1
1
1
1
1
1
NC1201
1
1
NC1208
4
4
NC1209
4
4
NC1211
2
2
99
3 Star t FPV Flight
Start by powering on your Radio and Goggles. NOVICE-II comes already bound
to your radio and on the right video channel matched with your goggles. Power
on NOVICE-II by sliding the battery into the battery tray and plugging it in. Once
the battery is plugged in, set NOVICE-II on a stable surface so it can calibrate.
Calibration takes a few seconds then NOVICE-II is ready to fly.
1
Install 4x AA 1.5v batter y to the radio and push the power switch to turn on
the radio. If the throttle stick was not at the bottom position the radioter will
alarm.
2
Power with 2S batter y
Power with 2S batter y
Connect the batter y for the NOVICE-II
3
. Turn on the Vr009 goggles and check the Video
4
Toggle SWA(AUX1) switch to arm the NOVICE-II , you will find "ARMED" notice
in the screen of the Goggles. Recommend Toggle SWC(AUX2) to choose Stable
mode for the beginner. Happy flight and keep it safe.
-1-
NOVICE-II 1-2S Brushless Micro Drone
Power with 1S batter y
Power with 1S batter y
Advertisement
Related Manuals for Eachine NOVICE-II
Summary of Contents for Eachine NOVICE-II
- Page 1 Power NC1203 NC1206 on NOVICE-II by sliding the battery into the battery tray and plugging it in. Once NC1206 the battery is plugged in, set NOVICE-II on a stable surface so it can calibrate.
- Page 2 Now you need to exit binding mode of the transmitter and controls pitch and roll of the aircraft. re-connect the Novice-II to the computer, then the Red and white LED should Left Stick Diagram be getting to be solid , this indicates the connection was established between the NOVICE-II and your transmitter.
- Page 3 NOVICE-II 1-2S Brushless Micro Drone 8.Receiver configuration 10.Goggles and VTX Receiver channel setting Please set Receiver mode to be SPI RX Support from the Configuration tab of the Betaflight Configurator, then select A7105_Flysky_2A Provider for AFHDS-2A Protocol Radio transmitter or Select A7105_Flysky Provider for...
- Page 4 NOVICE-II 1-2S Brushless Micro Drone 13.Radio channels/Switch and Betaflight mode setting 16.ESC Check and Flash fir mware 1. Download New release Blhelisuite from: https://www.mediafire.com/folder/dx6kfaasyo24l/BLHeliSuite 1、Handle 2. Connect the NOVICE-II flight controller to computer 2、Antenna 3、Switch A(arm and disarm) 4、Switch B 5、Switch C(Mode switch) 6、Switch D...