Related Manuals for Sony DVA-P1100
Summary of Contents for Sony DVA-P1100
- Page 1 DVD SUB PICTURE ENCODER/DECODER BOARDS DVA-P1100 INSTALLATION MANUAL 1st Edition Serial No. 10001 and Higher...
- Page 2 ! WARNING This manual is intended for qualified service personnel only. To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.
-
Page 3: Table Of Contents
2-1. Description of Internal Switches ............2-1 (E) 2-1-1. ENC-49 Board ............... 2-1 (E) 2-1-2. DEC-104 Board ..............2-1 (E) 2-2. Specifications ..................2-2 (E) 2-2-1. ENC-49 Board ............... 2-2 (E) 2-2-2. DEC-104 Board ..............2-3 (E) 1 (E) DVA-P1100... -
Page 5: Manual Structure
The following is a summary of all the section for understanding the contents of this manual. Section 1 Installation Explains the overview of the DVA-P1100, how to install the DVA-P1100 to PC, and the connector and cable information for peripheral equipment connections, etc. Section 2 Service Overview Explains the specifications of the DVA-P1100, function and factory setting of the switches on the board, etc. -
Page 7: Installation
The pixel data can be synchronized with the time code signal that is input to the encoder block, and is output. The DVA-P1100 is supplied with the following parts in addition to the above boards. . Flat cable (length : 5 cm) . -
Page 8: Installation And Removal Of Board
3. Insert the DVA-P1100 into the extension ISA slots. Fix the board panel with screws. The connector panel of the DVA-P1100 may be distorted if it collides with the inside of the personal computer while installing and removing the board. Be careful to avoid such collisions. -
Page 9: Matching Connectors And Cables
Use the following connectors and cables or their equivalents when connecting them to the connectors on the connector panel. Connector of ENC-49 Board Matching Connector/Cable Panel Indication Connector Sony Part No. TC OUT BNC 75 Z, male 1-569-370-12 TC IN 5C-2V coaxial cable... -
Page 11: Service Overview
Factory use only 2-1-2. DEC-104 Board S300 Side A (Component side) Switch Do not touch the switch so that it is “Factory use only”. Ref. No. Address Name Description Factory Setting S300 (M-1) Reset switch Factory use only 2-1 (E) DVA-P1100... -
Page 12: Specifications
TC IN connector (BNC type) : 1 SMPTE/EBU, 0.5 to 18 Vp-p (10 kZ) Time Code Output (Thru/Generator out) TC OUT connector (BNC type) : 1 SMPTE/EBU, 1.0 Vp-p (75 Z) Design and specifications are subject to change without notice. 2-2 (E) DVA-P1100... -
Page 13: Dec-104 Board
V IN connector (BNC type) : 1 Conforming with SMPTE 269M/ITU-R BT-656, 75 Z SDI Output (Monitor video output) V OUT connector (BNC type) : 1 Conforming with SMPTE 269M/ITU-R BT-656, 75 Z Design and specifications are subject to change without notice. 2-3 (E) DVA-P1100... - Page 15 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any...
- Page 16 Printed in Japan Sony Corporation DVA-P1100 (SY) J, E 1999. 2 16 Broadcasting & Professional Systems Company ©1999 3-202-282-01...