Page 2
Attach the mounting bracket to the wall using woodscrews and washers. Re-attach the loudspeaker to the bracket. Connect the loudspeaker to a suitable amplifier. The P111CD may be used with either 100 Volt line amplifiers or low impedance amplifiers. For use with a 100 V line amplifier:...
Page 3
For use with a low impedance amplifier: Remove the rear cover of the P111CD and connect the output from the amplifier to the red and black terminals (red terminal to the positive output). Most low impedance amplifiers can drive a 4Ω load. Verify this by checking the manual supplied with the amplifier.
Page 4
TECHNICAL SPECIFICATION Dimensions: 360×255×315 mm Weight: 4 kg Frequency response: 90 Hz — 20 kHz Maximum power: 50 W Sensitivity: 99 dB @1 W @ 1m Connections: Terminal blocks IP rating: IPX6 DISPOSAL AND RECYCLING You must not dispose of this appliance with domestic household waste. Most local authorities have specific collection system for appliances and disposal is free of charge to the end-user.