SERVICE MANUAL
Ver. 1.0 2010.08
• STR-KM7600 is the receiver section in HT-DDW7600/DDW8600.
This receiver incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
** Manufactured under license under U.S. Patent #'s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,003,467; 7,212,872 & other
U.S. and worldwide patents issued & pending. DTS, DTS Digital Surround, ES, and Neo:6 are registered trademarks and the DTS logos, Symbol and
DTS 96/24 are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
This receiver incorporates High-Defi nition Multimedia Interface (HDMI
HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
"x.v.Colour" and "x.v.Colour" logo are trademarks of Sony Corporation.
"BRAVIA" is a trademark of Sony Corporation.
"PlayStation" is a registered trademark of Sony Computer Entertainment Inc.
Amplifi er section
Models of area code AUS, SAF, EA
• Receiver (STR-KM7600)
Power Output
Stereo mode output (rated) (6 ohms, 1 kHz,
THD 1%)
100 W + 100 W
Surround mode output (reference)
2)
RMS output
FRONT:
185 W per channel
(with SS-MSP7500)
CENTER:
185 W
1)
(with SS-CNP7500)
SURROUND:
185 W per channel
(with SS-SRP7500)
SURROUND BACK:
185 W per channel
(with SS-SRP7500)
1)
Measured under the following conditions:
Area code
Power requirements
SAF
240 V AC, 50 Hz
EA
127 V AC, 60 Hz
AUS
230 V AC, 50 Hz
Sony Corporation
9-890-553-01
2010H08-1
Audio & Video Business Group
©
2010.08
Published by Sony EMCS (Malaysia) PG Tec
STR-KM7600
TM
SPECIFICATIONS
2)
Reference power output for front, center, sur-
round and surround back speakers. Depending
on the sound fi eld settings and the source, there
may be no sound output.
Inputs
1)
Analog
Digital (Coaxial)
1)
Outputs (Analog)
AUDIO OUT
SUBWOOFER
1)
Tone
Gain levels
1)
Reproduction frequency range:
FM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate frequency
) technology.
AM tuner section
Tuning range
Area code
AUS
Sensitivity: 800 mV/
SAF
50 kohms
Impedance: 75 ohms
EA
Voltage: 800 mV/10 kohms
Voltage: 2 V/1 kohm
Antenna
Intermediate frequency
±6 dB, 1 dB step
Video section
Inputs/Outputs
28 – 20,000 Hz
Video:
COMPONENT VIDEO:
87.5 – 108.0 MHz
FM wire antenna
75 ohms, unbalanced
10.7 MHz
MULTI CHANNEL AV RECEIVER
E Model
Australian Model
Tuning scale
10 kHz step
9 kHz step
530 –
531 –
1,710 kHz
1,710 kHz
530 –
531 –
1,610 kHz
1,602 kHz
531 –
1,602 kHz
Loop antenna
450 kHz
1 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
P
: 0.7 Vp-p, 75 ohms
B
P
: 0.7 Vp-p, 75 ohms
R
80 MHz HD Pass Through
– Continued on next page –