Advertisement
Quick Links
1.
INSTALL
Requirements
- Avoid directly exposing the eVscope to wind.
- Use the eVscope on stable ground.
- Use the eVscope under a clear sky.
- Locate the eVscope away from direct streetlight.
- For better results, avoid a full moon.
Set up the tripod
- Open the legs of the tripod
and adjust the device to the
height that works best for
you.
- Move the bubble level to the
middle of the black circle by
adjusting the legs
Note: each time you move
your eVscope, we recommend
resetting the bubble level
Install your eVscope
- Loosen the tripod screws. Install your eVscope vertically on
the tripod, then tighten the screws.
- Start the eVscope by pressing the ON button for one second.
A red light means the eVscope is ready.
- Remove the dust caps from the top of the tube and the
eyepiece
2.
CONNECT
- Download the Unistellar app from the Google Play Store
or Apple Store.
- Turn on your smartphone's Wi-Fi.
- Check available Wi-Fi networks.
- Connect your smartphone to the eVscope Wi-Fi network
named eVscope-abcdef (the network's name consists of
eVscope and six random characters).
ON
- Launch the Unistellar app on your smartphone.
Warning: If your app is not behaving properly (for example,
joystick not working anymore), do not hesitate to relaunch
it. If you use iOS, please disable Auto-Lock (in Settings >
Display & Brightness), which may freeze your app.
QUICK START GUIDE
3.
FOCUS & TRACK
Get the right focus
- Using the in-app joystick, lower the telescope slightly.
- Focus: Adjust the focusing wheel at the bottom of your
eVscope to align the visual cue with the top screw.
- Advanced focus (optional): Check the technical guide or the
online FAQ to learn how to use the Bahtinov mask embedded
in the dust cap.
Advertisement
Related Manuals for Unistellar eVscope
Summary of Contents for Unistellar eVscope
-
Page 1: Quick Start Guide
- Launch the Unistellar app on your smartphone. Warning: If your app is not behaving properly (for example, - Start the eVscope by pressing the ON button for one second. joystick not working anymore), do not hesitate to relaunch A red light means the eVscope is ready. - Page 2 Questions ? Comments ? Suggestions ? Please send us an email at support@unistellaroptics.com - Once you’ve selected a target, push the GoTo button so that your eVscope points automatically toward this target. This may take up to one minute. IMPROVE YOUR FUTURE OBSERVATIONS - Set your observing conditions in the Explore settings.