Connecting To the Rear AV1 Input Jacks (Continued)
When watching a video program input from the AV1 terminal, press the TV/AV button to select AV1.
Whenever the TV/AV button is pressed, the mode will change as follows:
28
TV mode
You can select a TV programme while watching a playback from a VCR
For example:
To select programme position "9" while watching a playback from external VCR, press "9" button of the
remote control. The TV set returns to the TV mode and programme "9" will be selected.
To select the programme position "26", press Digit (--/-) button, "2" then "6" button. Then TV set returns
to the TV mode and programme position "26" will be selected.
Note: Pressing either of the PROGRAMME UP or DOWN buttons of the remote control or the TV will
return the TV to the TV mode.
Selecting the Colour System in AV Mode
Depending on the type of video tape or connected AV equipment being used, it may be necessary to
select colour system. In this case, press the RECALL/COLOUR SYSTEM button and select a suitable
colour system.
Each time the RECALL/COLOUR SYSTEM button is pressed, colour system is changed as follow;
AV1
AUTO
Colour system setting for AV position is automatically stored in the memory.
Connecting To a DVD Player with AV1(DVD) Video Component Input
Terminal (Y, Cb or Cr)
Connect the component output terminal on
your DVD player to the component video input
terminal of this product. (NOTE: When a sig-
nal of Y,Cb,Cr/Y,Pb,Pr is received, the output
signal from monitor output terminal will be cor-
responding but without colour (black and
white image).)
To watch a program in this connection
status, select AV1(DVD).
28
AV1
(TV mode)
Make sure the component video terminal (Y, C
is connected correctly.
AV1
AV1
PAL
AV1(DVD)
AV2
(Optional
model)
AV1(DVD)
AV1
NTSC
To Input Terminal C
R
To Input Terminal C
B
To Input Terminal Y
or C
)
b
r
AV2
(Optional
model)
AV1
NTSC 4.43
INPUT
MONITOR OUT
AV1/DVD
C
R
R
R
To Audio Input-R (AV1)
(MONO)
C
L
L
B
To Audio Input-L (AV1)
Y
V
I
D
VIDEO
E
O
Video/DVD Player
15