Sony SRS-XB10 Reference Manual
Hide thumbs
Also See for SRS-XB10:
- Help manual (89 pages) ,
- Operating instructions manual (26 pages) ,
- Reference manual (2 pages)
Advertisement
Available languages
Available languages
Quick Links
Wireless Speaker
Reference Guide
SRS-XB10
©2017 Sony Corporation
Printed in China
http://www.sony.net/
English
Wireless Speaker
Before operating the system, please read this guide thoroughly and
retain it for future reference.
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
To reduce the risk of fire, do not cover the ventilation opening of the
appliance with newspapers, tablecloths, curtains, etc. Do not expose the
appliance to naked flame sources (for example, lighted candles).
To reduce the risk of fire or electric shock, do not expose this apparatus
to dripping or splashing, and do not place objects filled with liquids,
such as vases, on the apparatus.
Do not install the appliance in a confined space, such as a bookcase or
built-in cabinet.
Do not expose the batteries (battery pack or batteries installed) to
excessive heat such as sunshine, fire or the like for a long time.
The nameplate and important information concerning safety are located
on the bottom exterior of the main unit.
CAUTION
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Precautions
On safety
ˎ Before operating the system, be sure that the operating voltage of the
ˎ
system is identical with that of your local power supply.
About micro-USB cables
ˎ To charge, use a micro-USB cable and connect the system to:
ˎ
ˋ an AC outlet by using a commercially-available USB AC adaptor (5 V,
at least 0.5 A).
ˋ a USB port of a computer.
ˎ Make sure to use the following supplied micro-USB cable.
ˎ
USB Type A plug
USB Micro-B plug
(connects to a PC, USB AC adaptor)
(connects to the system)
On placement
ˎ Do not set the speaker in an inclined position.
ˎ
ˎ Do not leave the system in a location near heat sources, in a place
ˎ
subject to direct sunlight, excessive dust, moisture, rain, or mechanical
shock, or in a car with its windows closed.
ˎ Do not leave any objects susceptible to magnetism (cash cards, floppy
ˎ
disks with magnetic coding, etc.) near the system.
On cleaning
ˎ Do not use alcohol, benzine, or thinner to clean the cabinet.
ˎ
Others
ˎ Even if you do not intend to use the system for a long time, charge the
ˎ
battery to its full capacity once every 6 months to maintain its
performance.
ˎ If the system is not used for a long time, it may take longer to charge
ˎ
the battery.
On Copyrights
ˎ WALKMAN and WALKMAN logo are registered trademarks of Sony
ˎ
Corporation.
ˎ Microsoft and Windows are registered trademarks or trademarks of
ˎ
Microsoft Corporation in the United States and/or other countries.
ˎ Android is a trademark of Google Inc.
ˎ
ˎ Mac and Mac OS are trademarks of Apple Inc., registered in the U.S.
ˎ
and other countries.
ˎ iPhone, iPad and iPod are trademarks of Apple Inc., registered in the
ˎ
U.S. and other countries.
®
ˎ The BLUETOOTh
ˎ
word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by Sony Corporation is under
license.
ˎ The N Mark is a trademark or registered trademark of NFC Forum, Inc.
ˎ
in the United States and in other countries.
ˎ Other trademarks and trade names are those of their respective
ˎ
owners.
Notes on water resistant feature
4-692-893-62(1)
(Read before using the system)
Water resistant performance of the system
This system has a water resistant specification*
in "Degrees of protection against ingress of water" of the IEC60529
"Ingress Protection Rating (IP Code)." however, this system is not
completely water-tight.
Do not drop the system into hot water in a bathtub or purposely use it in
water.
Liquids that the water resistant performance specifications
apply to
Applicable :
Not applicable :
*
1
Requires that the cap is fastened securely.
*
2
The supplied accessories are not water resistant.
3
*
IPX5 (Degree of protection against jets of water): For details, refer to
help Guide.
The water resistant performance of the system is based on our
measurements under the conditions herein described. Note that
malfunctions as a result of water immersion caused by misuse by the
customer are not covered by the warranty.
To avoid the deterioration of the water
resistant performance
Check the following and use the system correctly.
ˎ Do not use or leave the system in an extremely hot or cold
ˎ
environment (temperature outside the range of 5 °C – 35 °C). If the
system is used or left in outside the above range, the system may
automatically stop to protect internal circuitry.
ˎ Be careful not to drop the system or subject it to mechanical shock.
ˎ
Deformation or damage may cause deterioration of the water
resistant performance.
ˎ Do not use the system in a location where large amount of water or
ˎ
hot water may splash on it. The system does not have a design that is
resistant to water pressure. Use of the system in the above location
may cause a malfunction.
ˎ Do not pour high-temperature water or blow hot air from a hair dryer
ˎ
or any other appliance on the system directly. Also, never use the
system in high temperature locations such as in saunas or near a
stove.
ˎ handle the cap with care. The cap plays a very important role in
ˎ
maintenance of the water resistant performance. When using the
system, make sure that the cap is closed completely. When closing the
cap, be careful not to allow foreign objects inside. Mark is on the
upper side of the cap. If the cap is not closed completely the water
resistant performance may deteriorate and may cause a malfunction
of the system as a result of water entering the system.
How to care for the system when wet
If the system gets wet, first remove the water from the system, and then
wipe off the moisture on the system using a soft, dry cloth. Especially in
cold regions, leaving moisture on its surface may cause the system to
freeze and malfunction. Be sure to wipe off the moisture after using the
system.
Put the system on towel or dry cloth. Then leave it at room temperature
and dry the system until no moisture remains.
Specifications
Speaker section
Speaker system
Enclosure type
BLUETOOTH
Communication System
Output
Maximum communication range
Frequency band
Modulation method
Compatible BLUETOOTh Profiles*
Supported Codec*
Transmission range (A2DP)
1
*
The actual range will vary depending on factors such as obstacles
between devices, magnetic fields around a microwave oven, static
electricity, reception sensitivity, aerial's performance, operating
system, software application, etc.
*
2
BLUETOOTh standard profiles indicate the purpose of BLUETOOTh
communication between devices.
3
*
Codec: Audio signal compression and conversion format
*
4
Advanced Audio Coding
*
5
Subband Codec
Microphone
Type
Directional characteristic
Effective frequency range
1,
2
3
*
of IPX5*
as specified
fresh water, tap water
liquids other than the above (soapy water,
water with detergent or bath agents,
shampoo, hot spring water, pool water,
seawater, etc.)
Cap
Approx. 46 mm dia.
Built-in passive radiator
BLUETOOTh Specification version 4.2
BLUETOOTh Specification Power Class 2
Line of sight approx. 10 m*
1
2.4 Ghz band (2.4000 Ghz - 2.4835 Ghz)
FhSS
2
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
hSP (headset Profile)
hFP (hands-free Profile)
3
AAC*
4
, SBC*
5
20 hz - 20,000 hz (Sampling frequency 44.1 khz)
Electret condenser
Omni directional
200 hz - 4,000 hz
General
Input
AUDIO IN jack (ø 3.5 mm stereo mini jack)
Power
DC 3.7 V (using the built-in lithium-ion battery), DC
5 V 0.5 A (using the USB power supply)
Usage life of lithium-ion battery (using the BLUETOOTh connection)
Approx. 16 hours*
6
Operating temperature
5 °C to 35 °C
Dimensions (including projecting parts and controls)
Approx. 75 mm dia. x 91 mm (h)
Mass
Approx. 260 g including battery
Supplied accessories Micro-USB cable (1)
Strap (1) (attached to the unit)
Startup Guide (1)
Reference Guide (this document) (1)
Warranty card (1)
*
6
When the specific music source is used and the volume level of the
unit is set to 10.
If the volume level of the unit is set to maximum, the usage life will be
approx. 5 hours. Time may vary, depending on the temperature or
conditions of use.
Design and specifications are subject to change without notice.
Advertisement
Related Manuals for Sony SRS-XB10
Summary of Contents for Sony SRS-XB10
-
Page 1: Specifications
ˎ The BLUETOOTh ˎ word mark and logos are owned by the Bluetooth Omni directional SIG, Inc. and any use of such marks by Sony Corporation is under Effective frequency range license. 200 hz - 4,000 hz ˎ The N Mark is a trademark or registered trademark of NFC Forum, Inc. - Page 2 기기의 음량 레벨이 최대로 설정된 경우 사용 수명은 약 5시간입니다. 시간은 온도나 사용 저작권 조건에 따라 다를 수 있습니다. WALKMAN 및 WALKMAN 로고는 Sony Corporation의 등록 상표입니다. 디자인 및 사양은 예고 없이 변경될 수 있습니다. Microsoft 및 Windows 는 미국 및/또는 기타 국가에서 Microsoft Corporation의...