QuIck StaRt GuIde
U.S. Cellular®
Customer Care:
1-888-944-9400
MBM65422901 (1.0)
Parts overview
Back-Facing Camera Lens
Power/Lock Key, Finger Print Sensor
Nano-SIM /microSD Card Tray
Volume Keys
Module Eject Key
Module
Charger/USB port (C-type)
Removing or inserting the
battery
Removing the battery
1
Press the module eject key to partly eject the
module from the device.
Module
Module Eject Key
2
Grab the middle of the ejected module and
pull it out.
Removing or inserting the
battery
3
Hold the battery and module with both hands
and separate them from one another in an
outward arc (as indicated below) to
disconnect the battery terminals.
NOTE
This device is supplied with the battery inserted. When
•
using the device for the first time, check the battery level
and fully charge the battery before using the device if
necessary.
Removing or inserting the
battery
Inserting the battery
1
Align the arrows on both the battery and the
module and firmly connect the battery
terminals to the module.
2
Align the battery with the lower edge and
carefully slide the module back into the device.
NOTE
Never press the module eject key when inserting the
•
module into the device.
When inserting the battery into the device, make sure the
•
battery is attached to the module.