Interpolation Settings; Crop/Border Settings - Sony MVS-8000X User Manual
Multi format switcher system
with icp-x7000 integrated control panel.
Hide thumbs
Also See for MVS-8000X:
- User manual (1310 pages) ,
- Installation manual (58 pages) ,
- Operation manual (26 pages)
Table of Contents
Advertisement
4
Select the function to be set.
To change the aspect ratio of the key: Press the [ASP
PERS] button, turning it on.
To reduce/enlarge or move the key: Press the [LOC
SIZE] button, turning it on.
To rotate or change the perspective of the key;
Press the [ROT] button, turning it on. To specify
the direction of rotation, press the [X] button or
[Y] button. To adjust perspective, press the [Z]
button.
5
Use the trackball or Z-ring for the operation.
Pressing the [FINE] button, turning it on, enables fine
adjustment of setting values (fine mode).
Pressing the [X], [Y], or [Z] button, turning it on,
restricts operation to the selected axis or item.
The target bank and resizer, and the current parameter
and its value, are displayed in the display of the device
control block.
The correspondence between the operation buttons
and parameters is shown in the following table.
Parameter Trackball
Operation
(horizontal
button
rotation)
[X] button [Y] button [Z] button
ASP
Aspect
Change
PERS
aspect ratio
on X-axis
LOC
Location
Move
SIZE
image on
X-axis
ROT
Rotation/
Rotate
Perspec-
image on
tive
Y-axis
To enter parameters
Operates identically to DME three-dimensional parameter
input.
For details, see "Three-Dimensional Parameter Entry"
(page 225).
To reset parameters
Operates identically to DME three-dimensional parameter
reset.
For details, see "Resetting three-dimensional
parameters" (page 225).
To return the resizer to default state (clear work
buffer)
To clear and reset to default state only the two-dimensional
transform and rotation parameters contained in the work
buffer, depending on the resizer operation, press the [CLR
WORK BUFR] button in the device control block.
To clear all of the parameters in the work buffer and reset
the resizer, press the [CLR WORK BUFR] button twice in
rapid succession.
For the default state, you can select either the factory
default settings or user settings.
For details, see "Power-On (Startup) State Selection"
(page 397).
To reset the bank to the default state
Press the [M/E DEF RCALL] button twice in rapid
succession to return the currently selected bank (M/E or
PGM/PST) to the default state.
Interpolation Settings
1
Trackball
Z-ring
(vertical
2
rotation)
Change
Change
aspect
aspect ratio
3
on X- and
ratio on Y-
axis
Y-axes
simultane-
ously
Move
Magnify
image on
and shrink
Y-axis
image
Rotate
Change
image on
distance of
X-axis
viewpoint
position
Crop/Border Settings
Cropping a key with resizer applied
1
2
3
119
In the M/E-1 >Key1 >Processed Key/Resizer menu
(1115), press [Resizer], turning it on.
In the <Resizer Effect/Rotation> group, press [Resizer
Process].
The Resizer Process menu (1115.3) appears.
Select an interpolation method.
Set the interpolation settings in the same way as for the
DME interpolation settings. However, the following
points are different.
• The <Interpolation Mode> mode group settings can
be set for any type of signal format.
• The anti-moiré filter cannot be set.
For details, see "Interpolation Settings" (page 274).
In the M/E-1 >Key1 >Processed Key/Resizer menu
(1115), press [Resizer], turning it on.
In the <Resizer Effect/Rotation> group, press [Border/
Crop].
The Border/Crop menu (1115.2) appears.
Press [Crop], turning it on.
Hide quick links:
Advertisement
Table of Contents
