Self Diagnosis Supported model BA-5D SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KV-34FS100 RM-Y180 LATIN NORTH SCC-S62K-A KV-34FS100 RM-Y180 LATIN SOUTH SCC-S62L-A RM-Y181 KV-32FS200 ® TRINITRON COLOR TELEVISION 9-965-929-01...
KV-27FS100/27FS200/29FS100/ 32FS100/32FS200/34FS100 SECTION 4: CIRCUIT ADJUSTMENTS ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER Use the Remote Commander (RM-Y180, RM-Y181) to perform the circuit adjustments in this section. Test Equipment Required: 1. Pattern generator 2. Frequency counter 3. Digital multimeter 4. Audio oscillator 4-1.
KV-27FS100/27FS200/29FS100/ 32FS100/32FS200/34FS100 4-5. ID MAP TABLE 7. Adjust the value of SCON with 3 and 6 for 1.90 ± 0.05Vpp. 0RGHO 'HVWLQDWLRQ ,'2 ,' ,' ,' ,' ,' ,' ,' .9)6 .9)6 &1' .9)6 .9)6 .9)6 .9)6 &1' .9)6 .9)6 4-6.
Page 12
KV-27FS100/27FS200/29FS100/ 32FS100/32FS200/34FS100 H. SIZE ADJUSTMENT (HSIZ) 6. While showing the SHUE item, adjust the waveform with 1 and 4 until the second and third bars show the same level 1. Input a monoscope signal. (V2 = V3 < 0.15Vp-p). 2. Activate the Service Adjustment Mode. 7.
KV-27FS100/27FS200/29FS100/ 32FS100/32FS200/34FS100 V. ANGLE (VANG), V. BOW (VBOW), UPPER PIN (UPIN) AND LOW PIN (LPIN) ADJUSTMENTS 1. Input a crosshatch signal. 2. Activate the Service Adjustment Mode. 3. Select VANG, VBOW, UPIN, and LPIN with 1 and 4 . 4. Adjust with 3 and 6 for the best picture. 5.