hit counter script
Sony DVP-NS999ES Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVD Player
  5. DVP-NS999ES - Es Dvd Player
  6. Service manual

Sony DVP-NS999ES Service Manual

Hide thumbs Also See for DVP-NS999ES:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
System
Laser: Semiconductor laser
Signal format system:
NT
SC: US, CND
PAL/(NTSC): AEP, UK, KR
Audio characteristics
Frequency response: DVD VIDEO (PCM
96 kHz): 2 Hz to 44 kHz (44 kHz: –2 dB
±1 dB), Super Audio CD: 2 Hz to
100 kHz (50 kHz: –3 dB ±1 dB), CD:
2 Hz to 20 kHz (±0.5 dB)
Harmonic distortion: DVD VIDEO/Super
Audio CD: 0.0012 %, CD: 0.0016 %
Dynamic range: DVD VIDEO/Super Audio
CD: 103 dB, CD: 99 dB
Wow and flutter: Less than detected value
(±0.001% W PEAK)
Outputs
(Jack name: Jack type/Output level/Load
impedance)
AUDIO OUT 1/2: Phono jack/2 Vrms/
10 kilohms
DIGITAL OUT (OPTICAL): Optical
output jack/–18 dBm (wave length:
660 nm)
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
5.1CH OUTPUT: Phono jack/2 Vrms/
10 kilohms
DVP-NS999ES
Photo: Gold type
SPECIFICATIONS
COMPONENT VIDEO OUT(Y, P
Phono jack/Y: 1.0 Vp-p/P
, P
B
interlace*=0.648 Vp-p, progressive or
interlace**=0.7 Vp-p/75 ohms
* BLACK LEVEL is ON
** BLACK LEVEL is OFF
VIDEO OUT 1/2: Phono jack/1.0 Vp-p/
75 ohms
S VIDEO OUT 1/2: 4-pin mini DIN/Y:
1.0 Vp-p, C: 0.286 Vp-p/75 ohms
General
Power requirements:
120 V AC, 60 Hz (US, CND)
220 V – 240 V AC, 50/60 Hz
(AEP, UK, KR)
Power consumption:
20 W (US, CND)
23 W (AEP, UK, KR)
Dimensions (approx.):
430 × 113 × 349 mm (17 × 4
in.) (width/height/depth) incl. projecting
parts
Mass (approx.):6.4 kg (14 lb 2 oz)
Operating temperature: 5 °C to 35 °C
(41 °F to 95 °F)
Operating humidity: 25 % to 80 %
RMT-D150A/D150P
Canadian Model
Korean model
Supplied accessories
, P
):
B
R
:
Check that you have the following items:
R
• Audio/video cord (pinplug × 3 y pinplug
× 3) (1)
• Power cord (1)
• Remote commander (remote) (1)
• Siz
e AA (R6) batteries (2)
Specifications and design are subject to
change without notice.
• Abbreviation
CND : Canadian
KR : Korea
1
/
× 13
3
/
2
4
CD/DVD PLAYER
US Model
AEP Model
UK Model

Advertisement

Table of Contents
loading

Related Manuals for Sony DVP-NS999ES

Summary of Contents for Sony DVP-NS999ES

  • Page 1 DVP-NS999ES RMT-D150A/D150P SERVICE MANUAL US Model Canadian Model AEP Model UK Model Korean model Photo: Gold type SPECIFICATIONS System Supplied accessories COMPONENT VIDEO OUT(Y, P Phono jack/Y: 1.0 Vp-p/P Laser: Semiconductor laser Check that you have the following items: interlace*=0.648 Vp-p, progressive or Signal format system: •...
  • Page 2 OPERATION. REPLACE THESE COMPONENTS WITH DE FONCTIONNEMENT. NE REMPLACER CES COM- SONY PARTS WHOSE PART NUMBERS APPEAR AS POSANTS QUE PAR DES PIÈCES SONY DONT LES SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- NUMÉROS SONT DONNÉS DANS CE MANUEL OU LISHED BY SONY.
  • Page 3 Unleaded solder Boards requiring use of unleaded solder are printed with the lead- free mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.) : LEAD FREE MARK Unleaded solder has the following characteristics.

  • Page 4: Table Of Contents

    TABLE OF CONTENTS Section Title Page Section Title Page Service Note ................5 MB-107 (SACD DECODER) Schematic Diagram ..4-33 MS-113 (LOADING MOTOR), CK-119 (SENSOR) GENERAL Printed Wiring Board and Schematic Diagram ..... 4-35 VP-58 Printed Wiring Board .......... 4-37 VP-58 (VIDEO BUFFER) Schematic Diagram .....

  • Page 5: Service Note

    SERVICE NOTE 1. DISASSEMBLY • This set can be disassembled in the order shown below. Top Case (Page 2-1) Front Panel Mechanism Power Power Block IF-98 Board AU-232 Board MB-107 Board Block Assembly Deck Transformer (Page 2-1) (Page 2-2) (Page 2-2) (Page 2-3) (Page 2-1) (Page 2-2)

  • Page 6: General

    If you have any questions or problems On placement concerning your player, please consult your • Place the player in a location with adequate nearest Sony dealer. ventilation to prevent heat build-up in the player. • Do not place the player on a soft surface such as a rug that might block the ventilation holes.

  • Page 7: Index To Parts And Controls

    Front panel display Index to Parts and Controls When playing back a DVD VIDEO/DVD-RW For more information, refer to the pages indicated in parentheses. Current audio signal (58) Front panel Playing status Lights up when the player outputs progressive signals (78) Disc type Digital TITLE...

  • Page 8: Guide To The Control Menu Display

    Guide to the Control Menu Display Guide to the Remote Control LCD Screen You can use the Control Menu to select a function and view related information. The Control The supplied remote has an LCD (Liquid Crystal Display) screen and scroll key for controlling Menu display shows different items depending on the disc type.

  • Page 9: Simple Start Guide

    If the supplied remote interferes with your other Sony DVD player, set the command mode for this player and the supplied remote to one that differs from the other Sony DVD player. The default command mode setting for this player and the supplied remote is DVD 1.

  • Page 10: Hookups

    If there are questions Components to be connected Connection Your setup (example) regarding your Sony TV set’s compatibility with this DVD player, please contact our customer service center. (page 26) • Surround effects: None...
  • Page 11 z Hint Connecting to your TV If you connect an AV amplifier (receiver) that conforms to the 96 kHz sampling frequency, use This connection will use your TV speakers for sound. connection CD/DVD player * Manufactured under license from Dolby DIGITAL OUT S-LINK AUDIO OUT...
  • Page 12 : Connecting to the 5.1ch input jacks Connecting to an AV amplifier (receiver) with 5.1 ch input jacks and/or a You can enjoy 5.1ch surround sound using digital input jack and 4 to 6 speakers the internal Dolby Digital, DTS, or Super Audio CD Multi decoder of this player.

  • Page 13: Playing Discs

    Enjoying the surround sound SPEAKER SETUP (DVD) • D-PCM (page 81) SIZE: effects DISTANCE: LEVEL(FRONT): • DOLBY DIGITAL (only if the LEVEL(REAR): To enjoy the surround sound effects of this TEST TONE: amplifier (receiver) has a Dolby Digital FRONT: LARGE player or your amplifier (receiver), set the decoder) (page 81) CENTER:...
  • Page 14 Using the click shuttle on the Playing a disc frame by frame Searching for a Resuming Playback From remote (Shuttle mode) using the click shuttle Particular Point on a the Point Where You (Jog mode) Disc Stopped the Disc (Search, Shuttle mode, Jog (Multi-disc Turn the click shuttle on the remote.
  • Page 15 z Hint Selecting a playback layer of Playing VIDEO CDs With To play without using PBC, press ./> or the Selecting a Playback number buttons while the player is stopped to select hybrid Super Audio CDs PBC Functions a track, then press H or ENTER. Area for a Super Audio (PBC Playback) “Play without PBC”...
  • Page 16 To change or cancel a program “TRACK” is displayed when you play PROGRAM Various Play Mode a VIDEO CD, Super Audio CD, or CD. ALL CLEAR Press PROGRAM. 1. TITLE 0 2 – 0 3 – – Functions 2. TITLE – – PROGRAM Select the program number of the title, (Program Play,...

  • Page 17: Searching For A Scene

    Press SEARCH MODE repeatedly z Hints Searching by Scene • You can display the first scenes of titles, chapters to select the search method. or tracks recorded on the disc on a screen divided Searching for a Scene ◆ When playing a DVD VIDEO/DVD-RW into 9 sections.

  • Page 18: Viewing Information About The Disc

    ◆ When playing a DVD VIDEO or DVD- When playing a VIDEO CD (without PBC Checking the information on the Viewing Information About the functions), Super Audio CD, or CD front panel display • T * : * : * (hours: minutes: seconds) Disc Track playing time and the current Playing time of the current title...

  • Page 19: Sound Adjustments

    z Hint Displaying the audio information 1 : ENGLISH When playing Dolby Digital or DTS sound tracks, “LFE” is enclosed in a dotted line when the LFE of the disc Sound Adjustments signal is not being output. Press DISPLAY during playback to display Changing the Sound the Control Menu.
  • Page 20 Press VIDEO CONTROL repeatedly z Hint Displaying the Subtitles Adjusting the Picture You can also select “SUBTITLE” from the Control to select the setting you want. Menu (page 14). (VIDEO CONTROL) The default setting is underlined. Note • STANDARD: Displays a standard picture.

  • Page 21: Using Various Additional Functions

    Press C/c to adjust the brightness To reset only the gamma value to the Press x to select “DISC MEMO level of the area that you selected. default setting Using Various Additional INPUT t” and press ENTER. C decreases the level (darkens the area), Select “RESET”...
  • Page 22 The display for entering the password H is pressed One beep • Depending on the connected unit, you may not be mode of a Sony wide TV appears. able to correctly control your TV or AV amplifier X is pressed...

  • Page 23: Settings And Adjustments

    AV amplifier Philco (receiver). TV/DVD Philips 8,21 switch Manufacturer Code number Pioneer Sony 80, 88, 89, 91 Portland Scroll key Denon 84, 85, 86 Proscan Kenwood 92, 93 Quasar 6,18...
  • Page 24 To switch the video signal format Note Settings for the Display If you have selected “PROGRESSIVE” for a Depending on the DVD, “4:3 LETTER BOX” may TV that does not accept signals in progressive (SCREEN SETUP) be selected automatically instead of “4:3 PAN format 480p, or if the software’s video signals SCAN”...
  • Page 25 ◆ AUDIO FILTER (except Super Audio CD) • DTS (DVD VIDEO only) Note Settings for the Speakers Selects the digital filter to reduce noise above Selects the type of DTS signal. Super Audio CD audio signals are not output from 22.05 kHz (Sampling frequency (Fs) of the D-PCM Select this when the player is...

  • Page 26: Additional Information

    Digital Theater Systems, Inc. developed. This Sony dealer or local Film based software, Video based technology conforms to 5.1-channel surround , Contact your Sony dealer or local authorized Sony service software (page 62) sound. The rear channel is stereo and there is authorized Sony service facility.

  • Page 27: Language Code List

    • Super Audio CD + CD (Hybrid disc) Interlace format (page 78) Interlace pictures Progressive format (page 78) This disc consists of an HD layer and a CD Interlace format shows every other line of an Compared to the Interlace format that layer.

  • Page 28: Disassembly

    DVP-NS999ES SECTION 2 DISASSEMBLY Note: Follow the disassembly procedure in the numerical order given. 2-1. TOP CASE REMOVAL 2-3. FL-129 BOARD REMOVAL 4 Top case 1 Connector 1 Two flat head screws (TP) (CN201) 2 Screw (BV3 3-CR) 0 FL-129 board...

  • Page 29: Board Removal

    2-5. IF-98 BOARD REMOVAL 2-7. MECHANISM DECK REMOVAL 1 Connector 3 Stay (FR) 7 Three screws (CN105) (BV3 3-CR) 2 Connector 2 Four screws 6 Two screws (CN104) (BV3 3-CR) (BV3 3-CR) 8 Mechanism deck 3 Connector (CN102) 1 Screw (B type +BV3) 4 Connector (CN103)

  • Page 30: Board Removal (Aep, Uk)

    2-9. EV-15 BOARD REMOVAL (AEP, UK) 2-11. MB-107 BOARD REMOVAL 5 EV-15 board 4 Two screws 1 Connector 5 Connector (CN503) (BV3 3-CR) 4 Connector (CN101) (CN102) 6 Connector 3 Flexible flat cable 2 Flexible flat cable (CN502) (CN203) (CN101) 7 Flexible flat cable 2 Flexible flat cable (CN501)

  • Page 31: Loading Assembly Removal

    2-13. LOADING ASSEMBLY REMOVAL 2 Screw (B3 × 8) 5 Loading assembly 4 Tray assembly 3 Slide the slider (R) and lift up the loading assembly. 1 Flexible flat cable (CN602) 2-14. OPTICAL PICK-UP REMOVAL 1 Three step screws 2 Optical pick-up...

  • Page 32: Internal View

    2-15. INTERNAL VIEW DC motor (loading) 1-763-397-21 KHM-270AAA Service assembly A-6062-709-A...

  • Page 33: Circuit Boards Location

    2-16. CIRCUIT BOARDS LOCATION ZSSR107G (US, CND) ZSSR107H (AEP, UK, KR) (SWITCHING REGULATOR) AU-232 (AUDIO OUT) IF-98 (INTER FACE) EV-15 (EURO AV) FL-129 (IF CON) VP-58 MS-113 (VIDEO OUT) (LOADING MOTOR) MB-107 (SIGNAL PROCESS SERVO) LD-115 SW-381 (LED) CK-119 (PUSH ENTER SWITCH) (SENSOR) FR-190 (FUNCTION SWITCH)

  • Page 34: Block Diagrams

    DVP-NS999ES SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM US, CND, KR VP-58 BOARD J103 (SEE PAGE 4-41 to 4-44) IC103 MB-107 BOARD J104 Y, Cb, Cr (SEE PAGE 4-9 to 4-34) IC104 COMPONENT VIDEO OUT IC105 IC603 J105 VIDEO...

  • Page 35: Rf/Servo Block Diagram

    DVP-NS999ES 3-2. RF/SERVO BLOCK DIAGRAM IC201 tl (DVD play) IC201 tl (CD play) IC201 2 (DVD play) IC201 2 (CD play) IC201 rs (DVD play) IC201 rs (CD play) 500 mV/DIV 50 ns/DIV 500 mV/DIV 200 ns/DIV 200 mV/DIV 50 ns/DIV...

  • Page 36: Signal Processor Block Diagram

    DVP-NS999ES 3-3. SIGNAL PROCESSOR BLOCK DIAGRAM PCLK MB-107 BOARD (2/5) (SEE PAGE 4-11 to 4-14) SDI 0 – 7 SDI 0 – 7 IC406 XSRQ 64M SDRAM IC303 XSHD SDCK 16M DRAM AUDI0 1 XSAK (SEE PAGE 3-15) SDEF COLRCK/TDOKT XFRRST IC301 <zzz (DVD play)

  • Page 37: System Control Block Diagram

    DVP-NS999ES 3-4. SYSTEM CONTROL BLOCK DIAGRAM MB-107 BOARD (3/5) (SEE PAGE 4-17 to 20, 29, 30) IC107 HD 8 – 15 (IC106) HA 0 – 4, 19 10 11 1 3 – 9 13 – 16 IC702 HA 0 – 4, 19 HD 8 –...

  • Page 38: Video (1) Block Diagram

    DVP-NS999ES 3-5. VIDEO (1) BLOCK DIAGRAM MB-107 BOARD (4/5) (SEE PAGE 4-21, 23) IC602 <z/c 1.6 Vp-p (66 MHz) MCLK DVD 0 – 7 ı PI 2 – 9 SIGNAL 80 – 83 PROCESSOR MA 0 – 11 86 – 89 A 0 –...

  • Page 39: Video (2) Block Diagram

    DVP-NS999ES 3-6. VIDEO (2) BLOCK DIAGRAM US, CND, KR VP-58 BOARD IC110 1, 7 (SEE PAGE 4-41 to 4-44) • Abbreviation : Canadian IC110 : Korea VIDEO BUFFER J101 CN101 2.4 Vp-p (H) Q105 FL106 Q116 BUFFER L. P. F...
  • Page 40 DVP-NS999ES 3-7. VIDEO (3) BLOCK DIAGRAM AEP, UK EV-15 BOARD IC102 ed IC102 wl IC102 ea (SEE PAGE 4-61 to 4-66) IC102 IC106 VIDEO BUFFER VIDEO AMP J101 CN101 1.8 Vp-p (H) 2.4 Vp-p (H) 2.0 Vp-p (H) Q105 FL106...

  • Page 41: Audio (1) Block Diagram

    DVP-NS999ES 3-8. AUDIO (1) BLOCK DIAGRAM MB-107 BOARD (5/5) IC801 (1/3) (SEE PAGE 4-25, 31, 34) CN501 TDO38 (1/2) DSP1DII DSP2DO SPDIFI SPDIFO CDDOUT IC501 SPDIF 32 DSP2DII AUDIO DSP ACH12 160 DSP1CH12I 56 DSP2CH12I IC503 DSP2CH78O 63 DLDAI DLDRO...

  • Page 42: Audio (2) Block Diagram

    DVP-NS999ES 3-9. AUDIO (2) BLOCK DIAGRAM AU-232 BOARD • Abbreviation IC107 (SEE PAGE 4-47) COAXIAL : Canadian DIGITAL OUT BUFFER : Korea T101 J107 COAXIAL CN105 DIGITAL (1/2) IC108 SPDIF 1 D IN OPTICAL IC102 5.1CH FRONT AUDIO AMP HNS103...

  • Page 43: Interface Control Block Diagram

    DVP-NS999ES 3-10. INTERFACE CONTROL BLOCK DIAGRAM FR-190 BOARD (1/2) FL-129 BOARD • Abbreviation (SEE PAGE 4-55) (SEE PAGE 4-51) : Canadian : Korea CN502 CN202 CN501 (1/2) (1/2) BZ201 BUZZER SYSTEM CONTROL XIFCS XIFCS XIFCS (SEE PAGE 3-8) IFBSY IFBSY...

  • Page 44: Power (1) Block Diagram

    DVP-NS999ES 3-11. POWER (1) BLOCK DIAGRAM IF-98 BOARD POWER BLOCK (SEE PAGE 4-68) (ZSSR107G: US, CND) (SEE PAGE 4-71) T101 CN102 Q201 CN201 POWER 3 (ZSSR107H: AEP, UK, KR) IP201 D201 L203 EVER+3.3V SW+8V (SEE PAGE 3-25) (SEE PAGE 4-75)

  • Page 45: Power (2) Block Diagram

    DVP-NS999ES 3-12. POWER (2) BLOCK DIAGRAM US, CND, KR AEP, UK VP-58 BOARD EV-15 BOARD (SEE PAGE 4-41 to 4-44) (SEE PAGE 4-61 to 4-66) • Abbreviation : Canadian RY101, 102, RY301 − 307 CN102 CN102 : Korea FL113 RY101, 102...

  • Page 46: Power (3) Block Diagram

    DVP-NS999ES 3-13. POWER (3) BLOCK DIAGRAM AU-232 BOARD EV-15 BOARD (2/2) (SEE PAGE 4-47) (SEE PAGE 4-61 to 4-66) CN107 CN301 +12V Q304 CN101 AC_10V D101 – 104 ACOUT L R-CORE POWER 1 AC_10V ACOUT N TRANS HNS101 (SEE PAGE 3-21)

  • Page 47: Printed Wiring Boards And Schematic 7-2. Diagrams

    DVP-NS999ES SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS For schematic diagram: THIS NOTE IS COMMON FOR PRINTED WIRING • Caution when replacing chip parts. BOARDS AND SCHEMATIC DIAGRAMS. New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum capacitor, For printed wiring boards: because it is damaged by the heat.

  • Page 48: Frame Schematic Diagram

    DVP-NS999ES 4-1. FRAME SCHEMATIC DIAGRAM FRAME AEP,UK 2nd EURO AV 1st EURO AV HNS101 HNS102 WA002 WA007 -12V WA003 WA008 AU-232 BOARD -12V CN101 WA004 WA009 -12V AC_10V WA005 WA010 -12V R-CORE N.C. TRANS AC_10V CN107 CN301 EURO L EURO L...

  • Page 49: Printed Wiring Boards And Schematic Diagrams

    DVP-NS999ES 4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS There are a few cases that the part isn't mounted in this model is printed on this diagram. MB-107 (SIGNAL PROCESS, SERVO) PRINTED WIRING BOARD – Ref. No.: MB-107 board; 3,000 series –...
  • Page 50 DVP-NS999ES MB-107 BOARD (SIDE B) MB-107 BOARD (B SIDE) C536 D501 D-15 JL202 FL107 JL211 JL123 JL125 FB109 JL204 JL234 JL223 D502 D-15 JL118 JL119 JL121 JL233 JL224 JL124 R172 JL231 JL228 JL120 JL201 D503 D-15 JL205 JL225 C244 C251...

  • Page 51: Rf Amp, Servo) Schematic Diagram

    DVP-NS999ES The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont MB-107 (RF AMP, SERVO) SCHEMATIC DIAGRAM • See page 4-5 for printed wiring board. line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que –...

  • Page 52: Arp, Servo Dsp) Schematic Diagram

    DVP-NS999ES MB-107 (ARP, SERVO DSP) SCHEMATIC DIAGRAM • See page 4-5 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – MB-107 BOARD (2/13) NO MARK:PB MODE MB-107 BOARD XRST (5/13) R360 R338 MB-107 BOARD PCLK (13/13) C335 0.01u...

  • Page 53: Mb-107 (Av Decoder) Schematic Diagram

    DVP-NS999ES MB-107 (AV DECODER) SCHEMATIC DIAGRAM • See page 4-5 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – MB-107 BOARD (3/13) NO MARK:PB MODE XWRH XAVDCS3 MB-107 BOARD (5/13) XAVDIT XAVDCS2 XWAIT MB-107 BOARD 27MAVD (6/13)

  • Page 54: Motor Drive) Schematic Diagram

    DVP-NS999ES MB-107 (MOTOR DRIVE) SCHEMATIC DIAGRAM • See page 4-5 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – MB-107 BOARD (4/13) SIGNAL PATH SPINDLE SERVO(SPEED AND PHASE) NO MARK:PB MODE TRACKING SERVO DVD/CD CDV +3.3V SLED SERVO DVD/CD...

  • Page 55: System Control) Schematic Diagram

    DVP-NS999ES MB-107 (SYSTEM CONTROL) SCHEMATIC DIAGRAM • See page 4-5 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – NO MARK:PB MODE MB-107 BOARD (5/13) D:DVD PLAY C:CD PLAY P:PAL DVD PLAY N:NTSC DVD PLAY S:SACD PLAY...

  • Page 56: Clock Generator

    DVP-NS999ES MB-107 (CLOCK GENERATOR) SCHEMATIC DIAGRAM • See page 4-5 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – • Waveforms 1 IC103 3, 4 MB-107BOARD (6/13) NO MARK:PB MODE *:IMPOSSIBLE TO MEASURE THE VOLTAGE AT THE MARKED POINTS.
  • Page 57 DVP-NS999ES MB-107 (I/P CONVERTER) SCHEMATIC DIAGRAM • See page 4-5 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – MB-107 BOARD (7/13) NO MARK:PB MODE R612 R613 MB-107 BOARD (5/13) R619 R622 R626 R630 R634 C604 C611...

  • Page 58: Video Encoder) Schematic Diagram

    DVP-NS999ES MB-107 (VIDEO ENCODER) SCHEMATIC DIAGRAM • See page 4-5 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – MB-107 BOARD (8/13) NO MARK:PB MODE C634 0.22u R021 C626 100u 6.3V R675 C624 JL608 0.22u VDD_IO S_BLANK...

  • Page 59: Mb-107 (Audio Dsp) Schematic Diagram

    DVP-NS999ES MB-107 (AUDIO DSP) SCHEMATIC DIAGRAM • See page 4-5 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – • Waveforms 1 IC501 yl, <zvm MB-107 BOARD (9/13) NO MARK:DVD/CD PLAY D:DVD PLAY C:CD PLAY P:PAL DVD PLAY...

  • Page 60: 2Ch/6Ch Dac I/O)

    DVP-NS999ES MB-107 (2ch/6ch DAC) SCHEMATIC DIAGRAM • See page 4-5 for printed wiring board. • Waveforms – Ref. No.: MB-107 board; 3,000 series – 1 IC503 4, IC502 qj MB-107 BOARD (10/13) DSCK MB-107 BOARD (12/13) DSADMLO NO MARK:DVD/CD PLAY...

  • Page 61: Nand Flash I/F, Extension I/O) Schematic Diagram

    DVP-NS999ES MB-107 (NAND FLASH I/F, EXTENSION I/O) SCHEMATIC DIAGRAM • See page 4-5 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – TDIKT MB-107 BOARD (11/13) MB-107 BOARD (2/13) XADYCS MB-107 BOARD (12/13) NO MARK:PB MODE NT/PAL...

  • Page 62: Audio Delay) Schematic Diagram

    DVP-NS999ES MB-107 (AUDIO DELAY) SCHEMATIC DIAGRAM • See page 4-5 for printed wiring board. • Waveforms – Ref. No.: MB-107 board; 3,000 series – 1 IC801 tl MB-107 BOARD (12/13) SPDIFAO ACH12AO NO MARK:PB MODE D:DVD PLAY ACH34AO C:CD PLAY...

  • Page 63: Mb-107 (Sacd Decoder) Schematic Diagram

    DVP-NS999ES MB-107 (SACD DECODER) SCHEMATIC DIAGRAM • See page 4-5 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – MB-107 BOARD (13/13) NO MARK:DVD/CD PLAY D:DVD PLAY C:CD PLAY *:IMPOSSIBLE TO MEASURE THE VOLTAGE AT THE MARKED POINTS.

  • Page 64: Loading Motor), Ck-119 (Sensor) Printed Wiring Board And Schematic Diagram

    DVP-NS999ES MS-113 (LOADING MOTOR), CK-119 (SENSOR) PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAM – Ref. No.: MS-113 board; 4,000 series, CK-119 board; 2,000 series – There are a few cases that the part isn't mounted in this model is printed on this diagram.

  • Page 65: Video Out

    DVP-NS999ES There are a few cases that the part isn't mounted in this model is printed on this diagram. VP-58 (VIDEO OUT) PRINTED WIRING BOARD – Ref. No.: VP-58 board; 5,000 series – – US, CND, KR – : Uses unleaded solder.
  • Page 66 DVP-NS999ES VP-58 BOARD (SIDE B) COMPONENT VIDEO OUT VIDEO OUT SCAN SELECT D1/D2 SELECTABLE INTERLACE PROGRESSIVE S1 VIDEO VP-58 BOARD (SIDE B) CN103 D107 B-12 J105 J103 D108 B-11 J104 JL113 J101 D109 B-10 JL106 S101 D113 B-10 J102 JL112...

  • Page 67: Vp-58 (Video Buffer) Schematic Diagram

    DVP-NS999ES VP-58 (VIDEO BUFFER) SCHEMATIC DIAGRAM • See page 4-37 for printed wiring board. – Ref. No.: VP-58 board; 5,000 series – – US, CND, KR – VP-58 BOARD (1/2) R199 2200 C168 C124 0.5% R188 R138 R191 L101 -0.8...

  • Page 68: Video Amp) Schematic Diagram

    DVP-NS999ES VP-58 (VIDEO AMP) SCHEMATIC DIAGRAM • See page 4-37 for printed wiring board. – Ref. No.: VP-58 board; 5,000 series – – US, CND, KR – VP-58 BOARD (2/2) R257 R267 R273 S101 NO MARK:PB MODE SCAN SELECT SELECTABLE...

  • Page 69: Audio Out

    DVP-NS999ES There are a few cases that the part isn't mounted in this model is printed on this diagram. AU-232 (AUDIO OUT) PRINTED WIRING BOARD – Ref. No.: AU-232 board; 1,000 series – : Uses unleaded solder. 5.1CH OUTPUT AUDIO OUT...

  • Page 70: Audio Out) Schematic Diagram

    DVP-NS999ES AU-232 (AUDIO OUT) SCHEMATIC DIAGRAM – Ref. No.: AU-232 board; 1,000 series – AU-232 BOARD R242 100k AEP,UK NO MARK:DVD/CD PLAY R243 100k CN107 D:DVD PLAY C:CD PLAY EURO L Q109 2SB709A-QRS-TX R197 R244 EV-15 BOARD AEP,UK R124 R154...
  • Page 71 DVP-NS999ES There are a few cases that the part isn't mounted in this model is printed on this diagram. FL-129 (IF CON) PRINTED WIRING BOARD – Ref. No.: FL-129 board; 4,000 series – ZSSR107G (US, CND) ZSSR107H (AEP, UK, KR) : Uses unleaded solder.

  • Page 72: If Con) Schematic Diagram

    DVP-NS999ES FL-129 (IF CON) SCHEMATIC DIAGRAM – Ref. No.: FL-129 board; 4,000 series – FL-129 BOARD CN203 C222 NO MARK:DVD/CD PLAY 0.01u LD-115 BOARD LED_TRAY :IMPOSSIBLE TO MEASURE THE CN801 VOLTAGE AT THE MARKED POINTS. LED_MULTI (SEE PAGE 4-68) JL204...

  • Page 73: Printed Wiring Board

    DVP-NS999ES There are a few cases that the part isn't mounted in this model is printed on this diagram. FR-190 (FUNCTION SWITCH), SW-381 (PUSH ENTER SWITCH) PRINTED WIRING BOARD – Ref. No.: FR-190, SW-381 board; 2,000 series – : Uses unleaded solder.

  • Page 74: Function Switch), Sw-381 (Push Enter Switch) Schematic Diagram

    DVP-NS999ES FR-190 (FUNCTION SWITCH), SW-381 (PUSH ENTER SWITCH) SCHEMATIC DIAGRAM – Ref. No.: FR-190, SW-381 board; 2,000 series – CN501 FR-190 BOARD 3.3V_MNT XFRRST NO MARK:PB MODE IFBSY XIFCS MB-107 BOARD (6/13) CN103 (SEE PAGE 4-20) PCONT IFRST R512 R513 CN502 3.3_MNT...

  • Page 75: Printed Wiring Board

    DVP-NS999ES There are a few cases that the part isn't mounted in this model is printed on this diagram. EV-15 (EURO AV) PRINTED WIRING BOARD – Ref. No.: EV-15 board; 2,000 series – – AEP, UK – : Uses unleaded solder.

  • Page 76: Inter Face)

    DVP-NS999ES EV-15 BOARD (SIDEB) COMPONENT VIDEO OUT SELECTABLE VIDEO OUT INTERLACE SCAN SELECT PROGRESSIVE LINE 1 (RGB) -TV LINE 2 S VIDEO OUT JL325 JL328 JL330 JL333 CN302 JL326 JL329 JL332 S101 JL334 JL324 CN303 J101 J103 J104 J105 JL335...
  • Page 77 DVP-NS999ES EV-15 (EURO AV1) SCHEMATIC DIAGRAM • See page 4-57 for printed wiring board. – Ref. No.: EV-15 board; 2,000 series – – AEP, UK – L101 100uH EV-15 BOARD (1/3) R170 R138 Q114 Q103 2SA1162-YG-TE85L EV-15 BOARD (2/3) 2SC2712-YG-TE85L...
  • Page 78 DVP-NS999ES EV-15 (EURO AV2) SCHEMATIC DIAGRAM • See page 4-57 for printed wiring board. – Ref. No.: EV-15 board; 2,000 series – – AEP, UK – EV-15 BOARD (2/3) NO MARK:PB MODE R257 R267 R273 S101 SCAN SELECT SELECTABLE IPSW...
  • Page 79 DVP-NS999ES EV-15 (EURO AV3) SCHEMATIC DIAGRAM • See page 4-57 for printed wiring board, and see page 4-63 for waveforms. – Ref. No.: EV-15 board; 2,000 series – EV-15 BOARD (3/3) NO MARK:PB MODE C307 FB306 IC301 AD8058ARM-REEL R354 2200 IC301 0.5%...
  • Page 80 DVP-NS999ES IF-98 (INTERFACE), LD-115 (LED) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM – Ref. No.: IF-98 board; 4,000 series, LD-115 board; 1,000 series – : Uses unleaded solder. There are a few cases that the part isn't mounted in this model is printed on this diagram.
  • Page 81 DVP-NS999ES There are a few cases that the part isn't mounted in this model is printed on this diagram. ZSSR107G (SWITCHING REGULATOR) PRINTED WIRING BOARD – Ref. No.: ZSSR107G board; 6,000 series – – US, CND – : Uses unleaded solder.

  • Page 82: Zssr107G (Switching Regulator) Schematic Diagram

    DVP-NS999ES ZSSR107G (SWITCHING REGULATOR) SCHEMATIC DIAGRAM The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont – Ref. No.: ZSSR107G board; 6,000 series – line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified.
  • Page 83 DVP-NS999ES There are a few cases that the part isn't mounted in this model is printed on this diagram. ZSSR107H (SWITCHING REGULATOR) PRINTED WIRING BOARD – Ref. No.: ZSSR107H board; 7,000 series – – AEP, UK, KR – : Uses unleaded solder.

  • Page 84: Zssr107H (Switching Regulator) Schematic Diagram

    DVP-NS999ES ZSSR107H (SWITCHING REGULATOR) SCHEMATIC DIAGRAM The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont – Ref. No.: ZSSR107H board; 7,000 series – line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified.

  • Page 85: Ic Pin Function Description

    DVP-NS999ES SECTION 5 IC PIN FUNCTION DESCRIPTION...
  • Page 86 5-2 E...

  • Page 87: Test Mode

    DVP-NS999ES SECTION 6 TEST MODE 6-1. GENERAL DESCRIPTION 6-3. SYSCON DIAGNOSIS The Test Mode allows you to make diagnosis and adjustment eas- The same contents as board detail check by serial interface can be ily using the remote commander and monitor TV. The instructions, checked from the remote commander.
  • Page 88 Submenu (2-6) M't check Error 22: region code discord. Selecting 2 and subsequent items calls the submenu screen of each Accordance between region codes, one is detected with item. model resistance and destination resistance, and the other Indication of “–-” in the submenu means the check is not sup- is detected with region resistance, is check.
  • Page 89 (4-4) RF Amp (SSI) W/R Check plies that these addresses are in the form of shadow. Also, Date write → read and accord check if the read data is not 0xA55A, another error will be present. Error 13: RF Amp resister write, and read data discord. After 0x01 is shifted to register which can read and write (5-5) ARP RAM Check RF Amp for 8 bit operation, if write and read data are dis-...
  • Page 90 7. Video Check Items List (7-2) Color Bar AVD color bar command write → Video OUT 2) Version Error: Not detected. (2-2) Revision The command is transferred to the AVD, and the color bar (2-3) ROM Check Sum signals are output from video terminals. (2-4) Model Type They are output from all video terminals (Composite, Y/C, (2-5) Region...
  • Page 91 Error Codes List 00: Error not detected 01: RAM write/read data discord 02: Gate array NG 03: EEPROM NG 04: Flash memory clear error 05: Flash memory write error 06: Flash memory read data discord 07: 2725 read data discord 08: ARP register read data discord 09: ARP ←→...

  • Page 92: Drive Auto Adjustment

    1. DVD-SL (single layer) 6-4. DRIVE AUTO ADJUSTMENT [ENTER] Select , insert DVD single layer disc, and press key, and the adjustment will be made through the following steps, then DVD reference disc adjusted values will be written to the EEPROM. Single Layer HLX-503 (J-6090-069-A) (NTSC) OR DVD Single Layer Disc Adjustment Steps...
  • Page 93 2. CD 3. DVD-DL (dual layer) [ENTER] [ENTER] Select , insert CD disc, and press key, and the adjust- Select , insert DVD dual layer disc, and press key, ment will be made through the following steps, then adjusted val- and the adjustment will be made through the following steps, then ues will be written to the EEPROM.

  • Page 94: Drive Manual Operation

    0. Disc Check Memory 6-5. DRIVE MANUAL OPERATION Disc Check On the Test Mode Menu screen, select , and the manual opera- tion menu will be displayed. For the manual operation, each servo on/off control and adjustment can be executed manually. 1.
  • Page 95 Focus Search the focus and turn on the focus. Disc Type 1. Disc Type Auto Check Turn ON/OFF the tracking servo. 2. DVD SL 12cm 3. DVD DL 12cm 4. CD 12cm Sled Turn ON/OFF the sled servo. 5. LCD 12cm If PLL is not locked (or can not be 6.
  • Page 96 5. Auto Adjustment ← Fj (L0 → L1) Focus jump reverse. (Trk/Sled Servo OFF) Auto Adjustment ↑ Lj (L1 → L0) Layer jump forward. 1. Auto TRK. Offset 2. Auto FCS Balance (Trk/Sled Servo ON) 3. Auto Focus Offset 4. Auto Focus Gain ↓...

  • Page 97: Mecha Aging

    6-7. EMERGENCY HISTORY EEPROM Data 3 -– DL -– CD LCD SL L0 L1 Analog FRSW xx xx xx xx xx ### EMG. History ### PLL Dac Gain xx xx xx xx xx Mirror Time xx xx xx xx xx Laser Hours xxh xxm xxh xxm...

  • Page 98: Version Information

    6-8. VERSION INFORMATION 6-10. IF CON SELF DIAGNOSTIC FUNCTION 1. FL-129 BOARD (IF CON) TEST MODE ## Version Information ## The front board test mode is the IF CON self diagnostic mode. IF con. Ver:x.xxx(xxxx) The IF CON can diagnose the functions of the front panel boards Group that the IF CON controls.
  • Page 99 2-2. Operation of Auto Self Check When the Self Check mode becomes active at the AC Power ON or by key input, the test display of the following steps (1) to (4) is repeated. (1) FLD and LED all ON (for 5 seconds) ;Digital GROUP TITLE TRACK CHAP INDEX ANGLE NTSC HOUR PROGRESSIVE MULTI...
  • Page 100 2-3. Each Self Check Function Each Self Check function tests the FLD display, LED display, and key input. IC203: Pin No. (Signal) Input Voltage [V] Pin ea (AD1) Pin es (AD2) Pin ed (AD3) Pin ef (AD4) Pin eg (AD5) Pin eh (AD6) Pin ej (CURSOR) 0 –...
  • Page 101 Key code display (at input of key, Key code: 0Ah) ;Digital CHAP INDEX ANGLE NTSC HOUR GROUP TITLE TRACK PROGRESSIVE MULTI REPEAT MP 3 SHUFFLE At input of faulty voltage CHAP INDEX ANGLE NTSC HOUR ;Digital GROUP TITLE TRACK PROGRESSIVE MULTI REPEAT MP 3 SHUFFLE...
  • Page 102 2-3-4. Communication Monitoring Display The communication state is monitored and displayed while the key name on the main unit and the remote commander is displayed. When the communication to the System Controller failed, VIDEO CD, DVD, and CD segments turn on. Communication error display (at no key input) GROUP TITLE TRACK CHAP INDEX ANGLE NTSC HOUR ;Digital...
  • Page 103 2-3-6. FLD Grid Test Display and SHUTTLE Click Operation Test 2-3-6-1. Transition Keys in Self Check Mode • on the remote commander ↑ • SHUTTLE on the remote commander during Grid Test display 2-3-6-2. Operation and Display The Self Check mode transits to this mode when key is en- ↑...
  • Page 104 2-3-9. Dimmer Test Mode 2-3-9-1. Transition Keys in Self Check Mode • ./> dial on the main unit 2-3-9-2. Operation and Display The self check mode transits to the dimmer test mode when dial is pressed more than 2 seconds. The indication is switched >...
  • Page 105 GROUP TITLE TRACK CHAP INDEX ANGLE NTSC HOUR ;Digital PROGRESSIVE MULTI MP 3 REPEAT 1 SHUFFLE PGM A- ( 12G~1G ) ANODE CONNECTION ; Digital PROGRESSIVE MULTI MP 3 REPEAT SHUFFLE CHAP INDEX GROUP TITLE TRACK ANGLE NTSC HOUR 6-19...

  • Page 106: Troubleshooting

    6-11. TROUBLESHOOTING Measure the clock signal frequency at CPUCK (CL102) of SYSCON (IC104) with an oscilloscope. 6-11-1. Cannot Enter Test Mode If the 8.25 MHz signal appears. t Check the machine ac- You cannot enter the Test mode when either button has been pressed cording to section 1-3-1 by any reason with the board assembled in the front panel.
  • Page 107 • WAIT signal check is displayed. Observe XWAIT (pin-yj) of SYSCON (IC104) with an os- 3-1. ARP & SERVO clock signal check cilloscope. Check frequency of CLKIN (pin-<zb/ ) If it is fixed to “L” (0V). t Observe CS2X to CS5X (pins- 33 MHz t Normal y;...
  • Page 108 3-2. Check XFRRST (pin-2) at CN103 on the MB-107 The ARP & SERVO (IC301) analog circuit of MB-107 board is defective or RF-Amp (IC201) or M-Driver (IC202) peripheral cir- board. If it is fixed to “L”. t The signal line has defective solder- cuit is defective or optical pickup block is defective or flat cable connection is defective ing, or is short-circuited with other signal lines, or parts are...

  • Page 109: Electrical Adjustment

    DVP-NS999ES SECTION 7 ELECTRICAL ADJUSTMENT 7-1. POWER SUPPLY CHECK In making adjustment, refer to 7-6. Adjustment Related Parts Arrangement. 1. ZSSR107G Board : US, CND ZSSR107H Board : AEP, UK, KR Note: During diagnostic check, the characters and color bars can be seen only with the NTSC monitor.

  • Page 110: Adjustment Of Video System

    7-2. ADJUSTMENT OF VIDEO SYSTEM 3. Checking S Video Output S-Y <Purpose> Check S-terminal video output. If it is incorrect, pictures will not 1. Composite Video Level Adjustment be displayed correctly in spite of connection to the TV with a S- (MB-107 BOARD) terminal cable.

  • Page 111: Checking Component Video Output Y

    5. Checking Component Video Output Y 7. Checking Component Video Output R-Y <Purpose> <Purpose> This checks component video output Y. If it is incorrect, correct This checks component video output R-Y. If it is incorrect, cor- brightness will not be attained when connected to, for instance, rect colors will not be displayed when connected to, for instance, projector.

  • Page 112: Checking Rgb Output G (Aep, Uk Model)

    9. Checking RGB Output G (AEP, UK Model) <Purpose> This checks RGB output G. If it is incorrect, pictures will not be displayed correctly in spite of connection to the TV with an EURO AV connecting cord. Mode Play Signal Check the Color-bar (100%) signal on DVD reference disc Test point...

  • Page 113: Adjustment Related Parts Arrangement

    7-3. ADJUSTMENT RELATED PARTS ARRANGEMENT MB-107 BOARD (SIDE A) RV601 COMPOSITE CN601 VIDEO LEVEL RV601 IC604 IC403 RV602 RV602 COMPONENT VIDEO LEVEL ZSSR107G/ZSSR107H BOARD (SIDE B) 7-6 E...

  • Page 114: Repair Parts List

    3-077-307-01 CASE, TOP (BLACK) (US, CND) 3-077-307-11 CASE, TOP (GOLD) (AEP, UK, KR) X-3952-720-1 WINDOW ASSY (B), TRAY (BLACK) (US, CND) 4-942-568-31 EMBLEM (NO.5), SONY (US, CND) X-3952-742-1 WINDOW ASSY (G), TRAY (GOLD) X-3952-714-1 PANEL ASSY (B), FRONT (BLACK) (US, CND)

  • Page 115: Chassis Assembly-1

    8-1-2. CHASSIS ASSEMBLY-1 mechanism deck not supplied not supplied not supplied chassis assembly-2 not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3952-918-1 FOOT ASSY (AEP, UK, KR) A-6061-105-A AU-232 (EC1) BOARD, COMPLETE (AEP, UK) X-4949-759-2 FOOT ASSY (US, CND) A-6061-111-A AU-232 (KR2) BOARD, COMPLETE (KR) A-6061-088-A FL-129 (UC2) BOARD, COMPLETE (US, CND)

  • Page 116: Chassis Assembly-2

    8-1-3. CHASSIS ASSEMBLY-2 US, CND, KR T901 not supplied AEP, UK not supplied not supplied not supplied not supplied The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety.

  • Page 117: Mechanism Deck Assembly

    8-1-4. MECHANISM DECK ASSEMBLY supplied M501 The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la supplied mark 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce ber specified.

  • Page 118: Electrical Parts List

    AU-232 8-2. ELECTRICAL PARTS LIST NOTE: The components identified by • Due to standardization, replacements in the • Items marked “*” are not stocked since they mark 0 or dotted line with mark parts list may be different from the parts speci- are seldom required for routine service.
  • Page 119 AU-232 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C179 1-163-259-91 CERAMIC CHIP 220PF Q102 8-729-421-19 TRANSISTOR UN2213-TX C180 1-136-850-11 MYLAR 0.1uF Q103 8-729-421-19 TRANSISTOR UN2213-TX C181 1-104-645-11 CERAMIC Q104 8-729-421-19 TRANSISTOR UN2213-TX Q105 8-729-052-95 TRANSISTOR 2SC5171 C182 1-163-009-91 CERAMIC CHIP 0.001uF...
  • Page 120 AU-232 CK-119 EV-15 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R210 1-249-915-11 CARBON 1/4W R143 1-249-929-11 CARBON 1.8K 1/4W R211 1-249-915-11 CARBON 1/4W R144 1-249-929-11 CARBON 1.8K 1/4W R145 1-249-929-11 CARBON 1.8K 1/4W R212 1-249-915-11 CARBON 1/4W R146 1-249-929-11 CARBON...
  • Page 121 EV-15 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C104 1-163-021-91 CERAMIC CHIP 0.01uF C310 1-163-085-00 CERAMIC CHIP C105 1-165-722-31 ELECT 100uF C311 1-163-085-00 CERAMIC CHIP C106 1-164-004-11 CERAMIC CHIP 0.1uF C312 1-163-021-91 CERAMIC CHIP 0.01uF C107 1-163-009-91 CERAMIC CHIP 0.001uF...
  • Page 122 EV-15 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D321 8-719-083-63 DIODE UDZSTE-1713B J105 1-794-733-11 JACK, PIN 1P (COMPONENT VIDEO OUT P D323 8-719-069-56 DIODE UDZSTE-176.2B D324 8-719-083-63 DIODE UDZSTE-1713B < COIL > D325 8-719-988-61 DIODE 1SS355TE-17 L101 1-419-387-21 INDUCTOR 100uH...
  • Page 123 EV-15 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q301 8-729-421-19 TRANSISTOR UN2213-TX R140 1-216-049-11 RES-CHIP 1/10W Q302 8-729-424-08 TRANSISTOR UN2111-TX R141 1-216-049-11 RES-CHIP 1/10W Q303 8-729-421-19 TRANSISTOR UN2213-TX R142 1-216-049-11 RES-CHIP 1/10W Q304 8-729-424-08 TRANSISTOR UN2111-TX R143 1-216-049-11 RES-CHIP 1/10W...
  • Page 124 EV-15 FL-129 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R221 1-216-001-00 RES-CHIP 1/10W R349 1-216-001-00 RES-CHIP 1/10W R222 1-216-001-00 RES-CHIP 1/10W R350 1-216-001-00 RES-CHIP 1/10W R223 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R351 1-216-001-00 RES-CHIP 1/10W R224 1-208-790-11 METAL CHIP...
  • Page 125 FL-129 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C217 1-128-131-11 ELECT 22uF R218 1-216-081-00 RES-CHIP 1/10W C218 1-115-339-11 CERAMIC CHIP 0.1uF (US, CND) C219 1-164-004-11 CERAMIC CHIP 0.1uF R219 1-216-081-00 RES-CHIP 1/10W C220 1-115-339-11 CERAMIC CHIP 0.1uF (US, CND) C221...
  • Page 126 FR-190 IF-98 LD-115 MB-107 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark FR-190 BOARD LD-115 BOARD ************ ************ (Ref. No. 2, 000 Series) (Ref. No. 1, 000 Series) < CONNECTOR > < DIODE > CN501 1-794-506-11 CONNECTOR, FFC/FPC 13P D803 8-719-080-49 DIODE LNJ951C4B0S0 (MULTI CHANNEL) CN502...
  • Page 127 MB-107 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C232 1-162-968-11 CERAMIC CHIP 0.0047uF 10% C327 1-162-970-11 CERAMIC CHIP 0.01uF C233 1-162-968-11 CERAMIC CHIP 0.0047uF 10% C328 1-162-970-11 CERAMIC CHIP 0.01uF C234 1-165-708-11 ELECT 47uF 6.3V C329 1-162-970-11 CERAMIC CHIP 0.01uF...
  • Page 128 MB-107 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C520 1-162-970-11 CERAMIC CHIP 0.01uF C709 1-162-970-11 CERAMIC CHIP 0.01uF C521 1-162-970-11 CERAMIC CHIP 0.01uF C710 1-162-970-11 CERAMIC CHIP 0.01uF C522 1-162-970-11 CERAMIC CHIP 0.01uF C711 1-162-970-11 CERAMIC CHIP 0.01uF C523 1-162-970-11 CERAMIC CHIP...
  • Page 129 MB-107 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark CN203 1-815-507-21 CONNECTOR, FFC/FPC 26P IC401 6-702-300-01 IC TK11118CSCL-G CN501 1-778-274-11 CONNECTOR, FFC/FPC 13P IC403 8-752-416-45 IC CXD1935Q CN502 1-816-296-21 PIN, CONNECTOR (PC BOARD) 9P IC406 6-700-098-01 IC HY57V641620HGT-P-TR-V * CN503 1-770-470-21 PIN, CONNECTOR (PC BOARD) 6P IC501...
  • Page 130 MB-107 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R138 1-216-809-11 METAL CHIP 1/10W R210 1-216-815-11 METAL CHIP 1/10W R211 1-216-809-11 METAL CHIP 1/10W R139 1-216-833-11 METAL CHIP 1/10W R212 1-216-809-11 METAL CHIP 1/10W R140 1-216-864-11 SHORT CHIP R218 1-216-846-11 METAL CHIP 120K...
  • Page 131 MB-107 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R321 1-218-879-11 METAL CHIP 0.5% 1/10W R605 1-216-833-11 METAL CHIP 1/10W R322 1-218-847-11 METAL CHIP 0.5% 1/10W R612 1-216-809-11 METAL CHIP 1/10W R323 1-218-855-11 METAL CHIP 2.2K 0.5% 1/10W R613...
  • Page 132 MB-107 MS-113 SW-381 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R720 1-216-844-11 METAL CHIP 1/10W RB111 1-233-576-11 RES, CHIP NETWORK 100 R722 1-216-841-11 METAL CHIP 1/10W < VARIABLE RESISTOR > R723 1-216-864-11 SHORT CHIP R726 1-216-864-11 SHORT CHIP RV601 1-223-583-11 RES, ADJ, CARBON 1K...
  • Page 133 VP-58 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-6061-094-A VP-58 (UC2) BOARD, COMPLETE C154 1-163-021-91 CERAMIC CHIP 0.01uF (US, CND, KR) C155 1-163-021-91 CERAMIC CHIP 0.01uF *************************** (Ref. No. 5, 000 Series) C156 1-163-021-91 CERAMIC CHIP 0.01uF C157 1-163-021-91 CERAMIC CHIP...
  • Page 134 VP-58 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < COIL > R109 1-216-049-11 RES-CHIP 1/10W R110 1-216-049-11 RES-CHIP 1/10W L101 1-419-387-21 INDUCTOR 100uH L102 1-419-387-21 INDUCTOR 100uH R111 1-216-049-11 RES-CHIP 1/10W L103 1-419-387-21 INDUCTOR 100uH R112 1-216-049-11 RES-CHIP 1/10W...
  • Page 135 VP-58 POWER BLOCK (ZSSR107G) POWER BLOCK (ZSSR107H) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R180 1-216-049-11 RES-CHIP 1/10W R261 1-216-295-91 SHORT CHIP R181 1-216-089-91 RES-CHIP 1/10W R262 1-216-295-91 SHORT CHIP R263 1-216-295-91 SHORT CHIP R182 1-216-073-91 RES-CHIP 1/10W R264...
  • Page 136 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark ************** HARDWARE LIST ************** 7-682-946-09 SCREW +PSW 3X5 7-682-548-09 SCREW +B 3X8 7-682-546-09 SCREW +B 3X5 7-624-102-04 STOP RING 1.5, TYPE -E 7-627-852-38 SCREW, PRECISION +P1.7X1.8TYPE3 ACCESSORIES ************ 1-477-327-11 REMOTE COMMANDER (RMT-D150A) (US, CND, KR) 1-477-327-31 REMOTE COMMANDER (RMT-D150P)
  • Page 137 DVP-NS999ES Sony Corporation 2002H0500-1 9-929-732-11 Home Video Campany © 2002. 8 – 196 – 8-24 Published by Quality Assurance Dept.

This manual is also suitable for:

Rmt-d150aRmt-d150p

Table of Contents