Table of Contents
Advertisement
Adjusting the focus
You can adjust the focus manually for
different recording conditions.
1
During recording or standby, set
the FOCUS switch B to MAN.
9 appears.
2
Turn the focus ring A to adjust
the focus.
9 changes to
cannot be adjusted any farther, and
changes to
when the focus cannot be
adjusted any closer.
To adjust automatically
Set the FOCUS switch B to AUTO.
9 disappears and the automatic focus
adjustment is restored.
z Tips
• The focal length information (the distance at
which the subject is in focus; for when it is dark
and hard to adjust the focus) appears for about 3
seconds in the following cases.
when the focus
– When you set the FOCUS switch B to MAN
and 9 appears.
– When you rotate the focus ring A while 9
is displayed.
• You can switch the focal length information
between meters and feet ([FOCUS DISPLAY],
p. 101).
Using automatic focus/fixed
focus temporarily (Push auto
focus/Focus hold)
Using push auto focus
Set the FOCUS switch B to MAN, then
press and hold the PUSH AUTO/FOCUS
HOLD button C while shooting. The
image is shot with automatic focus. Keep
the button pressed to shoot. If you release
the button, the setting returns to manual
focusing.
Using focus hold
Set the FOCUS switch B to AUTO, then
press and hold the PUSH AUTO/FOCUS
HOLD button C while shooting. The
image is shot with the focus fixed at the
point you start to press the button. Keep the
button pressed to shoot. If you release the
button, the setting returns to auto focusing.
Focusing using the focus
magnifier
The selected area on the LCD screen is
magnified and displayed. This is useful
when adjusting the focus.
[FOCUS MAGNIFIER] is assigned to the
ASSIGN6/FOCUS MAG button (p. 54).
Press the ASSIGN6/FOCUS MAG
button.
The center of the screen is magnified.
The setting changes with each press of the
button.
35
Continued ,
Hide quick links:
Advertisement
Table of Contents
