Table of Contents
Advertisement
Table 25. DFSMS Messages Based on Library Failure or Exception Conditions (continued)
Resulting Console Message
CBR3773I Cartridge with unreadable or invalid external
label left in input station in library library-name.
An attempt was made to enter a cartridge into library
library-name. The external label on the cartridge is
missing, unreadable, or contains an invalid character. The
cartridge remains in the input station.
CBR3774I Unexpected volume volser ejected from
library library-name.
Volume volser is in an unexpected location in library
library-name. Either no entry exists for the volser in the
Library Manager inventory, or the cartridge external label
is missing or unreadable. The cartridge was ejected from
the library to a convenience output station.
CBR3776I Volume volser inaccessible in library
library-name.
During the execution of a 3494 Tape Library operation,
library library-name has indicated that volume volser is
inaccessible. The volume cannot be retrieved using
normal 3494 Tape Library automated function; manual
intervention is needed.
CBR3777I Volume volser now accessible in library
library-name.
Volume volser that was reported as inaccessible
previously is retrieved and is accessible now for
automated operations in library library-name.
CBR3778I Cleaner volume ejected from library
library-name.
A cleaner volume exceeded its maximum usage count
and was ejected from library library-name.
450
3494 Tape Library Operator Guide
Action
1. Remove the cartridge from the input station and
correct the problem with the external label, then
reenter the cartridge into the 3494 Tape Library.
2. Clear the item from the Intervention Required
window. See "Intervention Conditions" on page 459
for details.
1. Remove the ejected cartridge from the output station.
2. Determine if the label is missing or damaged and
replace it if necessary.
3. Determine which 3494 Tape Library the volume
belongs in using the interactive storage management
facility (ISMF) tape volume list application and place
the volume in the convenience input station of that
3494 Tape Library.
4. Clear the item from the Intervention Required
window. See "Intervention Conditions" on page 459
for details.
1. Go to the 3494 Tape Library and if an
intervention-required indication is displayed,
determine whether it is for the inaccessible volume
by viewing the intervention conditions. If it is the
inaccessible volume, follow the instructions for the
inaccessible condition.
2. If the intervention-required indication is not
displayed or the inaccessible volume is not one of the
conditions listed, find the volume record in the
database. (Select the Search database for volumes...
option in the Database window.)
3. Place the 3494 Tape Library in Pause mode.
4. Enter the 3494 Tape Library and find the home cell
the volume should have been in and search for it in
the surrounding cells. If the database shows the
volume in a device, check that device. If the volume
is stuck in the device, call your service representative
to remove the volume. If the volume is found, and
after leaving the 3494 Tape Library, place it in the
convenience input station.
5. Place the 3494 Tape Library in Auto mode.
6. Resubmit the 3494 Tape Library request or job after
the input station is inventoried.
Resubmit the 3494 Tape Library request or job that failed
because the volume was inaccessible.
1. Remove the cartridge from the convenience output
station.
2. Place a new cleaner cartridge of the same type, with
a bar code label that matches one of the cleaner
masks, in the convenience input station.
Advertisement
Table of Contents
