Navigating And Selecting In The Setup Utility; Displaying System Information; Restoring Default Settings In The Setup Utility - HP Pavilion dv2500 Maintenance And Service Manual
Hide thumbs
Also See for Pavilion dv2500:
- Maintenance and service manual (158 pages) ,
- User manual (22 pages) ,
- User manual (13 pages)
Table of Contents
Advertisement
Navigating and selecting in the Setup Utility
Because the Setup Utility is not Windows-based, it does not support the TouchPad. Navigation and
selection are by keystroke.
To choose a menu or a menu item, use the arrow keys.
●
To choose an item in a drop-down list or to toggle a field, for example an Enable/Disable field, use
●
either the arrow keys or
To select an item, press enter.
●
To close a text box or return to the menu display, press esc.
●
To display additional navigation and selection information while the Setup Utility is open, press f1.
●
Displaying system information
The following procedure explains how to display system information in the Setup Utility. If the Setup Utility
is not open, begin at step 1. If the Setup Utility is open, begin at step 2.
To start the Setup Utility, turn on or restart the computer, and then press
1.
enter setup" is displayed in the lower-left corner of the screen.
Access the system information by using the Main menu.
2.
To exit the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
3.
Discarding Changes, and then press enter. (The computer restarts in Windows.)
Restoring default settings in the Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is not
already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
To start the Setup Utility, turn on or restart the computer, and then press
1.
enter setup" is displayed in the lower-left corner of the screen.
Select Exit > Load Setup Defaults, and then press enter.
2.
When the Setup Confirmation is displayed, press
3.
To set your preferences and exit the Setup Utility, press f10, and then follow the instructions on the
4.
screen.
The Setup Utility default settings are set when you exit the Setup Utility and go into effect when the computer
restarts.
NOTE:
Your password, security, and language settings are not changed when you restore the factory
default settings.
102 Chapter 5 Setup Utility
f5
or f6.
f10
f10
enter
to save your preferences.
while "Press <F10>to
while "Press <F10>to
- Quick Links:
- Hard Drive
- Memory Module
Hide quick links:
Advertisement
Table of Contents
