Hitachi CP-X9110 Network Manual page 43
Hide thumbs
Also See for CP-X9110:
- User manual (129 pages) ,
- Quick setup manual (16 pages) ,
- Specification (1 page)
Table of Contents
Advertisement
3.1 Projector Web Control - Network Settings (continued)
Item
Wired Setup
DHCP ON
DHCP OFF
IP Address
Subnet Mask
Default
Gateway
DNS Server Address
Other Setup
Crestron e-Control
Click the [Apply] button to save the settings.
NOTE
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection from
Network Restart on the main menu. (63)
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
• The WEP Key, WPA passphrase and SSID settings will not be set if the invalid
characters are used.
• The projector does not allow both wireless and wired LAN to be connected to
the same network. Do not set the same network address for both wireless and
wired LAN.
Configures the wired LAN settings.
Configures network settings.
Enables DHCP.
Disables DHCP.
Configures the IP address when DHCP is disabled.
Configures the subnet mask when DHCP is disabled.
Configures the default gateway when DHCP is disabled.
Configures the DNS server address.
Configures other network settings.
Set whether or not to use Crestron e-Control
If you choose Disable, not the selection window but the Login
window of Projector Web Control will be displayed at first.
Description
3. Web Control
®
.
43
Advertisement
Table of Contents
