KDC-MPV5025/MPV525 KDC-MPV7026/WV6027 DISASSEMBLY FOR REPAIR 3 7 63 1515 0 How to Disassemble (PANEL ASSY) How to install knob (SRC) 1) Remove four screws (A). 1) Place knob (F) and knob (G) in the positions indicated in 2) While holding the section (B) indicated with arrows, pull and the diagram below.
KDC-MPV5025/MPV525 KDC-MPV7026/WV6027 COMPONENTS DESCRIPTION 3 7 63 1515 0 SWITCH UNIT (X16-2480-20) Ref. No. Application / Function Operation / Condition / Compatibility LCD Driver Drives LCD Remote Control IC Controls the unit D/A Convert IC REMO ON SW The power supply of IC2 is turned on when base level goes “L”...
KDC-MPV5025/MPV525 KDC-MPV7026/WV6027 COMPONENTS DESCRIPTION 3 7 63 1515 0 Ref. No. Application / Function Operation / Condition / Compatibility SW Regulator Control Q101 Composite signal buffer DSI lights when the base is “L”. Q151 DSI Driver DSI turns off when the base is “H”.
Page 6
KDC-MPV5025/MPV525 KDC-MPV7026/WV6027 MICROCOMPUTER’S TERMINAL DESCRIPTION 3 7 63 1515 0 Truth Pin No. Pin Name Application Processing Operation Description value table R DATA RDS decoder DATA input terminal Not used Destination other than E and E2 L CE CE output terminal for LCD driver...
Page 7
KDC-MPV5025/MPV525 KDC-MPV7026/WV6027 MICROCOMPUTER’S TERMINAL DESCRIPTION 3 7 63 1515 0 Truth Pin No. Pin Name Application Processing Operation Description value table B.U-DET Momentary power down DET terminal BU DET : L, BU no DET (momentary power down) : H ACC-DET...
Page 8
KDC-MPV5025/MPV525 KDC-MPV7026/WV6027 MICROCOMPUTER’S TERMINAL DESCRIPTION 3 7 63 1515 0 Truth Pin No. Pin Name Application Processing Operation Description value table LX_REQ_S Request input from external devices Request DET : L KEY-REQ Communication request from LCD driver L : KEY input LO.S SW...
KDC-MPV5025/MPV525 KDC-MPV7026/WV6027 TEST MODE 3 7 63 1515 0 1. How to enter the test mode 7. CD Receiver Test Mode Specification • While holding the Preset 1 and Preset 3 keys, reset the unit. • When resetting to start, forced ejection of CD is prohib- ited.
Page 10
KDC-MPV5025/MPV525 KDC-MPV7026/WV6027 TEST MODE 3 7 63 1515 0 11. Special display when the display is All ON Security Pressing the Preset keys while the power is All OFF dis- • Forced Power ON mode (All models) plays the following information.
Page 11
KDC-MPV5025/MPV525 KDC-MPV7026/WV6027 PC BOARD 3 7 63 1515 0 (COMPONENT SIDE VIEW) (FOIL SIDE VIEW) SWITCH UNIT SWITCH UNIT X16-2480-20 A/2 (J74-1565-02) X16-2480-20 A/2 (J74-1565-02) X16 B/2 X16 B/2 ESD-GND VOL-B RESET VOL-A ILL+B D+ILLGND V-ILLDATA V-ILLCLK REMO L 13942296513...
Page 16
KDC-MPV5025/MPV525 KDC-MPV7026/WV6027 3 7 63 1515 0 PC BOARD (COMPONENT SIDE VIEW) CD PLAYER UNIT X32-5500-00 (J74-1552-12) RFOK CP12 CP13 L 13942296513 CP15 MIACK X32-5500-00 Ref. No. Address u163 Refer to the schematic diagram for the values of resistors and capacitors.
Page 17
KDC-MPV5025/MPV525 KDC-MPV7026/WV6027 3 7 63 1515 0 PC BOARD (FOIL SIDE VIEW) CD PLAYER UNIT X32-5500-00 (J74-1552-12) Vref FLAG HOLD MIRR LOCK TRK IN TRK OUT FCS DOWN FCS UP C22 C23 D3.3V DAVdd3.3V SDIO BCKIA 12EJE A.+8V LRCKIA /EJECT...
Page 21
KDC-MPV5025/MPV525 KDC-MPV7026/WV6027 3 7 63 1515 0 (E30-6229) : KDC-MP425 KDC-MPV525 (E30-6278) : KDC-MPV7026 (E30-6277) : KDC-X579 KDC-MPV5025 KDC-MP6026 KDC-WV6027 PRE OUT KDC-W6027/W6027Y ∗ F GND F GND ∗ F GND R365 AUX R R GND AUX GND W101 ∗...
Page 22
KDC-MPV5025/MPV525 KDC-MPV7026/WV6027 3 7 63 1515 0 SWITCH UNIT (X16-2480-20) (A/2) ED1(SEGMENT) ED1(C ESD-GND TP13 FLIP DET RESET RESET VOL A D-GND+ILL-GND VOL B V-ILL DATA L 13942296513 ILL+B CP33 470 REMOTE CONTROL IC V-ILL CLK TP11 DI 10 REMO...