Repair Guide; Precautions In Disassembly And Reassembly - Hitachi CR 13VC Technical Data And Service Manual

Hide thumbs Also See for CR 13VC:

Table of Contents

9. REPAIR GUIDE

The [Bold] numbers in the description below correspond to the item numbers in the Parts List and exploded

assembly diagram for the Model CR 13VC. Before disassembly or replacement of saw blades, disconnect the

power cord plug from the outlet.

1. Disassembly

(1) Removal of Front Cover (C) [2] (Fig. 1)

Remove the Hex. Socket Hd. Bolt (W/Flange) M5 x 12 [22] and remove Base (B) [1]. Remove the Cover

Clip [13] with a flat-blade screwdriver and remove Front Cover (C) [2] from the main body.

(2) Removal of Gear Cover (B) [5] (Figs. 2 and 3)

Hold the fan of the armature and loosen the Nylock Bolt (W/Flange) M6 x 35 [20] about two turns previously.

Remove four Machine Screws (W/Washers) M5 x 60 (Black) [45] and pull out Gear Cover (B) [5] from the

main body. Remove the Nylock Bolt (W/Flange) M6 x 35 [20] and Washer (G) [21]. Then Second Shaft (B)

[30] and Sub Shaft (B) [25] can be removed from Gear Cover (B) [5] in an assembly state.

[1]

[2]

[22]

[13]

Fig. 1

[5]

[20]

[21]

[22]

[25]

[30]

Fig. 2

--- 14 ---

[45]

Table of Contents