Table of Contents
Advertisement
Power connector and cable
Description
Power connector and cable
Before removing the power cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Service doors (see
b.
Optical drive
c.
Hard drive
d.
Keyboard (see
e.
Top cover (see
f.
Display assembly (see
Remove the power cable:
1.
Disconnect the cable from the system board (1).
2.
Remove the cable from the clips around the fan (2), and then remove the power cable from the
computer (3).
Reverse this procedure to install the power cable.
80
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
Service doors on page
(Optical drive on page
35)
(Hard drive on page
37)
Keyboard on page
43)
Top cover on page
48)
Display assembly on page
32).
33).
75)
Spare part number
827039-001
Advertisement
Table of Contents
