Table of Contents
Advertisement
Hard drive
Description
Hard drives
1 TB, 5400 rpm, 7 mm
500 GB, 5400 rpm, 7 mm
500 GB, 7200 rpm, 7 mm
Hard drive Hardware Kit (includes bracket and screws)
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the large service door (see
To remove a hard drive:
1.
Remove the 4 Phillips PM2.5×5.0 screws (1) that secure the hard drive to the chassis.
2.
Pull the plastic tab to slide the hard drive (2) away from the center of the computer to disengage it from
the connector.
Battery on page
32).
Service doors on page
33).
Component replacement procedures
Spare part number
778192-001
778187-001
703267-001
828147-001
37
Advertisement
Table of Contents
