hit counter script
Sony HCD-DZ200 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Receiver
  5. HCD-DZ200
  6. Service manual
Sony HCD-DZ200 Service Manual

Sony HCD-DZ200 Service Manual

Super audio cd/dvd receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
QQ
3 7 63 1515 0

SERVICE MANUAL

Ver. 1.0 2005.05
HCD-DZ200 is the amplifier, DVD/CD and
tuner section in DAV-DZ200.
This system incorporates with Dolby*
Pro Logic (II) adaptive matrix surround decoder and the
2
DTS*
Digital Surround System.
*1 Manufactured under license from Dolby Laboratories.
"Dolby," "Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories.
*2 Manufactured under license from Digital Theater
Systems, Inc.
TE
L 13942296513
"DTS" and "DTS Digital Surround" are trademarks of
Digital Theater Systems, Inc.
Amplifier section
Stereo mode (rated)
Surround mode (reference) music power output
* Depending on the sound field settings and the source,
there may be no sound output.
Inputs
VIDEO/SAT
AUDIO IN
Phones
www
.
Sony Corporation
9-879-679-01
Audio Group
2005E1678-1
Published by Sony Engineering Corporation
© 2005.05
http://www.xiaoyu163.com
1
Digital and Dolby
Super Audio CD/DVD system
55 W + 55 W (3 ohms at 1
Laser
kHz, DIN)
Front: 120 W + 120 W
(with SS-TS45)
Center*: 120 W
(with SS-CT45)
Signal format system
Surround*: 120 W + 120
Frequency response (at 2 CH STEREO mode)
W
(with SS-TS42B)
Subwoofer*: 120 W
(with SS-WS31)
Harmon ic distortion
Tuner section
System
Sensitivity: 250/450 mV
Impedance: 50 kilohms
FM tuner section
Sensitivity: 250/125 mV
Tuning range
Impedance: 50 kilohms
Accepts low-and high-
Antenna (aerial)
impedance headphones.
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
x
ao
u163
y
i
http://www.xiaoyu163.com
HCD-DZ200
2 9
8
Model Name Using Similar Mechanism
Mechanism Type
Optical Pick-up Name
Q Q
3
6 7
1 3
1 5
SPECIFICATIONS
S emiconductor laser
(Super Audio CD/DVD:
= 650 nm)
λ
(CD:
= 790 nm)
Emission duration:
continuous
NTSC/PAL
DVD (PCM): 2 Hz to 22
kHz (±1.0 dB)
CD: 2 Hz to 20 kHz (±1.0
dB)
Less than 0.03 %
PLL quartz-locked digital
synthesizer system
87.5 – 108.0 MHz (50 kHz
step)
FM wire antenna (aerial)
10.7 MHz
SUPER AUDIO CD/DVD RECEIVER
co
.
9 4
2 8
E Model
Australian Model
HCD-DZ300
CDM85-DVBU102
KHM-310CAA/C2RP
0 5
8
2 9
9 4
2 8
AM tuner section
Tuning range
531 – 1,602 kHz (with the
interval set at 9 kHz)
λ
530 – 1,710 kHz (with the
interval set at 10 kHz)
Antenna (aerial)
AM loop antenna (aerial)
Intermediate frequency
450 kHz
Video section
Outputs
Video: 1 Vp-p 75 ohms
S video:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
P
/C
, P
B
B
75 ohms
Input
VIDEO: 1 Vp-p 75 ohms
— Continued on next page —
m
9 9
9 9
/C
: 0.7 Vp-p
R
R

Advertisement

Table of Contents
loading

Related Manuals for Sony HCD-DZ200

Summary of Contents for Sony HCD-DZ200

  • Page 1: Service Manual

    HCD-DZ200 3 7 63 1515 0 SERVICE MANUAL E Model Australian Model Ver. 1.0 2005.05 HCD-DZ200 is the amplifier, DVD/CD and tuner section in DAV-DZ200. This system incorporates with Dolby* Digital and Dolby Model Name Using Similar Mechanism HCD-DZ300 Pro Logic (II) adaptive matrix surround decoder and the...
  • Page 2 THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. applied to the solder joint for a slightly longer time. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE Soldering irons using a temperature regulator should be set to PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR about 350 °C.

  • Page 3: Table Of Contents

    HCD-DZ200 3 7 63 1515 0 TABLE OF CONTENTS SERVICING NOTE 5-10. Schematic Diagram – DMB10 Board (3/5) – ....31 ........... 4 5-11. Schematic Diagram – DMB10 Board (4/5) – ....32 5-12. Schematic Diagram – DMB10 Board (5/5) – ....33 GENERAL ..............

  • Page 4: Servicing Note

    To prevent a malfunction, the system has performed the self- u163 (xx is a number) diagnosis function. ,Contact your nearest Sony dealer or local authorized Sony service facility and give the 5- character service number. Example: E 61 10 http://www.xiaoyu163.com...
  • Page 5 HCD-DZ200 3 7 63 1515 0 • SERVICE POSITION (DMB10 BOARD) When servicing side B of the DMB10 board Remove the DMB10 board from bracket. (Refer to DISASSEMBLY 3-6. (page 11)). Set the DMB10 board facing the side B upward as shown.

  • Page 6: General

    HCD-DZ200 SECTION 2 This section is extracted from instruction manual. 3 7 63 1515 0 GENERAL Front panel A "/1 (on/standby) (32, 36, 78) H FUNCTION (36) B Disc tray (36) I PHONES jack (36) C A (open/close) (36, 78)
  • Page 7 HCD-DZ200 3 7 63 1515 0 J CLEAR, - (33, 38, 71, 72) Remote K TOP MENU (40) L C/X/x/c/ENTER (32, 38, 62, 67, 73, 77, M O RETURN (42) REPLAY, STEP (36) O . PRESET –, TV CH – (33, 36, 71, 75) P m/ SLOW, TUNING –...

  • Page 8: Disassembly

    HCD-DZ200 SECTION 3 3 7 63 1515 0 DISASSEMBLY 3-1. DISASSEMBLY FLOW • This set can be disassembled in the order shown below. • The dotted square with arrow ( ) prompts you to move to the next job when all of the works within the dotted square ( ) are completed.

  • Page 9: Case, Front Panel Assy

    HCD-DZ200 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. 3-2. CASE, FRONT PANEL ASSY 4 screw (CASE3 TP2) 6 five screws (+BVTP 3 × 8) 7 case 5 screw (CASE3 TP2) qa connector...

  • Page 10: Fl Board, H/P Board

    HCD-DZ200 3 7 63 1515 0 3-3. FL BOARD, H/P BOARD 3 knob (vol) qa FL board 4 nut 9 screw (+BVTP 2.6) 8 shield (front) 5 two sheets 2 H/P board 7 earth line 1 screw 6 three screws q;...

  • Page 11: I/O Board, Dc Fan

    HCD-DZ200 3 7 63 1515 0 3-5. I/O BOARD, DC FAN 3 wire (flat type) 13core(CN201) 9 wire (flat type) 9core(CN101) qs tuner qa two screws (+BVTP 3 × 8) 5 wire (flat type) 23core(CN601) 0 I/O board 2 connector 8 three screws (+BVTP 3 ×...

  • Page 12: Main Board

    HCD-DZ200 3 7 63 1515 0 3-7. MAIN BOARD 1 two screws (+BV 3) 2 screw (BVTP 3 × 12) 3 heat sink (AMP) 5 wire (flat type) 7core(CN503) 6 wire (flat type) 23core(CN507) 4 wire (flat type) 11core(CN505)

  • Page 13: Dvd Mechanism Deck (Cdm85-Dvbu102)

    HCD-DZ200 3 7 63 1515 0 3-8. DVD MECHANISM DECK (CDM85-DVBU102) 1 t hree screws (+BV 3) 2 dmb bracket 3 three screws (+BV 3) 5 DVD mechanism deck (CDM85-DVBU102) 4 wire (flat type) 5core L 13942296513 3-9. TRAY 1 Move the Chuck cam in the direction of the arrow.

  • Page 14: Belt, Ms-203 Board

    HCD-DZ200 3 7 63 1515 0 3-10. BELT, MS-203 BOARD 2 chuck cam 3 belt 4 screw (M 1.7 × 2.5) 1 two claws L 13942296513 7 MS-203 board 6 DC motor 5 three claws u163 http://www.xiaoyu163.com...

  • Page 15: Base Unit

    HCD-DZ200 3 7 63 1515 0 3-11. BASE UNIT 3 two claws 2 chuck cam 1 two claws 4 base unit L 13942296513 3-12. OPTICAL PICK-UP (KHM-310CAA) 4 two insulators 2 four insulator screws 5 two insulators 6 optical pick-up...

  • Page 16: Test Mode

    HCD-DZ200 SECTION 4 3 7 63 1515 0 TEST MODE 3. Disc Tray Lock Note 1: Regarding the notification symbol “R” The disc tray lock function for the antitheft of an demonstration Because the number of the operating buttons of this product disc in the store is equipped.
  • Page 17 HCD-DZ200 3 7 63 1515 0 4-4. MIRROR TIME ADJUSTMENT DVD SECTION 4-1. GENERAL DESCRIPTION To enter Mirror Time Adjustment, press 5 “R” button on the remote commander. The screen will appear as below. The Mirror Time and IOP measurement allows you to make...
  • Page 18 HCD-DZ200 3 7 63 1515 0 (3) Select “5. MIRR time Adjust”. (14) Confirm the same values are displayed. If it is not same, return to step 7. Drive Manual Operation MIRR time Adjust Menu 1. Servo Control 2. Track/Layer Jump 1.
  • Page 19 HCD-DZ200 3 7 63 1515 0 4-5. EXECUTING IOP MEASUREMENT (5) Wait until a hexadecimal number appear. Manual Adjust In order to execute mirror time adjustment, the following standard procedures must be followed. 1. Track Balance Adjust: 2. Track Gain Adjust: (1) In standby mode, press three buttons x , A and 3.

  • Page 20: Diagrams

    HCD-DZ200 SECTION 5 3 7 63 1515 0 DIAGRAMS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) For Schematic Diagrams. For Printed Wiring Boards.
  • Page 21 HCD-DZ200 3 7 6 3 1 5 1 5 0 MEMO • Circuit Boards Location TUNER UNIT I/O board DMB10 board IPOD board MAIN board STBY board MS-203 board FL board 1 3 9 4 2 2 9 6 5 1 3...

  • Page 22: Block Diagram - Rf/Servo Section

    HCD-DZ200 5-1. BLOCK DIAGRAM – RF/SERVO SECTION – 3 7 6 3 1 5 1 5 0 DVDRFIP DVDA DVDB DETECTOR DVDC DVDD 8 NA 9 NB IC102 (1/3) CD/DVD RF AMP, FOCUS/TRACKING ERROR AMP DVD SYSTEM PROCESSOR • Signal Path...

  • Page 23: Block Diagram - Video Section

    HCD-DZ200 5-2. BLOCK DIAGRAM – VIDEO SECTION – 3 7 6 3 1 5 1 5 0 IC201 VIDEO AMP, 75Ω DRIVER IC204 VIDEO SELECTOR YUV2 9 3B OUT3 6 4 CIN YUV1 14 2B OUT2 8 YIN VOUT...

  • Page 24: Block Diagram - Amp Section

    HCD-DZ200 5-3. BLOCK DIAGRAM – AMP SECTION – 3 7 6 3 1 5 1 5 0 IC3601 A/D CONVERTER IC4501 BUFFER D1 - D3, SCK, 1 LIN DOUT BCKO, LRCKO LRCKO AUDIO SECTION BCKO (Page 25) R-CH 2 RIN...

  • Page 25: Block Diagram - Audio Section

    HCD-DZ200 5-4. BLOCK DIAGRAM – AUDIO SECTION – 3 7 6 3 1 5 1 5 0 IC301 IC108 HEADPHONE STREAM PROCESSOR J801 HPOUTL1 PHONES HPOUTL2 • Signal Path Q507 HPOUTR1 Q806 - 809 : AUDIO MUTING MUTING HPOUTR2...

  • Page 26: Block Diagram - Power Section

    HCD-DZ200 5-5. BLOCK DIAGRAM – POWER SECTION – 3 7 6 3 1 5 1 5 0 T901 D901 TRANSFORMER(MAIN) AC IN D931 IC901 D905 +31.5V Q901 POWER DC/DC VOLTAGE PROTECTION CONVERTER CONTROLLER IC931 T801 VOLTAGE DETECT PC901 TO FLUORESCENT...

  • Page 27: Printed Wiring Board - Dmb10 Board (Side A)

    HCD-DZ200 • See page 21 for Circuit Boards Location. 5-6. PRINTED WIRING BOARD – DMB10 BOARD (SIDE A) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 IC103 is a written in and settled EEPROM. Supply with a single article has not been carried out.

  • Page 28: Printed Wiring Board - Dmb10 Board (Side B)

    HCD-DZ200 • See page 21 for Circuit Boards Location. 5-7. PRINTED WIRING BOARD – DMB10 BOARD (SIDE B) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location C3610 R3621...

  • Page 29: Schematic Diagram - Dmb10 Board (1/5)

    HCD-DZ200 5-8. SCHEMATIC DIAGRAM – DMB10 BOARD (1/5) – 3 7 6 3 1 5 1 5 0 ( 1 / 5 ) FL401 CN401 FB402 FB404 JL4601 JL4602 JL4603 JL4604 FL403 FB403 FB406 JL4605 JL4606 (2/5, 3/5, 4/5)

  • Page 30: Schematic Diagram - Dmb10 Board (2/5)

    HCD-DZ200 • See page 51 for Waveforms. • See page 58 for IC Pin Function Description. 5-9. SCHEMATIC DIAGRAM – DMB10 BOARD (2/5) – 3 7 6 3 1 5 1 5 0 (5/5) (1/5) (1/5, 2/5) (Page 33)

  • Page 31: Schematic Diagram - Dmb10 Board (3/5)

    HCD-DZ200 5-10. SCHEMATIC DIAGRAM – DMB10 BOARD (3/5) – IC103 is a written in and settled EEPROM. Supply with a 3 7 6 3 1 5 1 5 0 single article has not been carried out. In case you exchange by DMB11 board, please put on IC103 currently used with the model again.

  • Page 32: Schematic Diagram - Dmb10 Board (4/5)

    HCD-DZ200 • See page 52 for IC Block Diagram. 5-11. SCHEMATIC DIAGRAM – DMB10 BOARD (4/5) – 3 7 6 3 1 5 1 5 0 ( 4 / 5 ) (2/5) (Page 30) (1/5, 2/5, 3/5) (Page 29, 30, 31)

  • Page 33: Schematic Diagram - Dmb10 Board (5/5)

    HCD-DZ200 5-12. SCHEMATIC DIAGRAM – DMB10 BOARD (5/5) – 3 7 6 3 1 5 1 5 0 ( 5 / 5 ) R3611 C3610 16V B R3621 IC3601 C3609 10 16V PCM1803DBR C3611 C3621 0.01 0.01 (Page 31)

  • Page 34: Printed Wiring Board - Main Board (Side A)

    HCD-DZ200 • See page 21 for Circuit Boards Location. 5-13. PRINTED WIRING BOARD – MAIN BOARD (SIDE A) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location D503 D914...

  • Page 35: Printed Wiring Board - Main Board (Side B)

    HCD-DZ200 • See page 21 for Circuit Boards Location. :Uses unleaded solder. 5-14. PRINTED WIRING BOARD – MAIN BOARD (SIDE B) – 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location SPEAKER D101...

  • Page 36: Schematic Diagram - Main Board (1/7)

    HCD-DZ200 • See page 51 for Waveform. • See page 55 for IC Pin Function Description. 5-15. SCHEMATIC DIAGRAM – MAIN BOARD (1/7) – 3 7 6 3 1 5 1 5 0 CN509 FFC-S-1.0 R628 R608 R710 R711...

  • Page 37: Schematic Diagram - Main Board (2/7)

    HCD-DZ200 5-16. SCHEMATIC DIAGRAM – MAIN BOARD (2/7) – 3 7 6 3 1 5 1 5 0 IC515 TA7809LS TP517 C595 C596 C597 R704 47 16V 0.33 R703 IC516 TA7805LS TP518 C602 C601 C598 0.33 47 16V TP538...

  • Page 38: Schematic Diagram - Main Board (3/7)

    HCD-DZ200 • See page 53 for IC Block Diagrams. 5-17. SCHEMATIC DIAGRAM – MAIN BOARD (3/7) – 3 7 6 3 1 5 1 5 0 R345 R347 TP331 R317 R316 R319 TP334 C324 25V F R382 EB907 EB910...

  • Page 39: Schematic Diagram - Main Board (4/7)

    HCD-DZ200 • See page 53 for IC Block Diagrams. 5-18. SCHEMATIC DIAGRAM – MAIN BOARD (4/7) – 3 7 6 3 1 5 1 5 0 IC106 CXD9774M C116 1 16V F C372 1 50V R431 C186 100k 0.033...

  • Page 40: Schematic Diagram - Main Board (5/7)

    HCD-DZ200 • See page 51 for Waveform. • See page 53 for IC Block Diagram. 5-19. SCHEMATIC DIAGRAM – MAIN BOARD (5/7) – 3 7 6 3 1 5 1 5 0 L107 10uH Q303 CN300 2SC3243TP-E C307 100 16V C108 0.1...

  • Page 41: Schematic Diagram - Main Board (6/7)

    HCD-DZ200 • See page 53 for IC Block Diagrams. 5-20. SCHEMATIC DIAGRAM – MAIN BOARD (6/7) – 3 7 6 3 1 5 1 5 0 IC103 Q106 Q108 CXD9774M 2SA1235TP-1EF 2SA1235TP-1EF C113 1 16V R113 L133 C183 C394 0.033...

  • Page 42: Schematic Diagram - Main Board (7/7)

    HCD-DZ200 5-21. SCHEMATIC DIAGRAM – MAIN BOARD (7/7) – 3 7 6 3 1 5 1 5 0 R930 0 R924 D931 680P 250V YG906C2R C938 CN901 FH901 FH902 C963 C966 C931 L931 HOLDER HOLDER 0.001 10000P 220P 220P...

  • Page 43: Printed Wiring Board - Panel Section

    HCD-DZ200 • See page 21 for Circuit Boards Location. 5-22. PRINTED WIRING BOARD – PANEL SECTION – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location D801 D802 D803 D804...

  • Page 44: Schematic Diagram - Panel Section

    HCD-DZ200 • See page 55 for IC Block Diagram. 5-23. SCHEMATIC DIAGRAM – PANEL SECTION – 3 7 6 3 1 5 1 5 0 S802 S803 S808 S804 S805 S806 S807 R851 S801 SW. KEY SW. KEY SW. KEY SW.

  • Page 45: Printed Wiring Board - I/O Board (Side A)

    HCD-DZ200 • See page 21 for Circuit Boards Location. 5-24. PRINTED WIRING BOARD – I/O BOARD (SIDE A) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location IC201 IC203...

  • Page 46: Printed Wiring Board - I/O Board (Side B)

    HCD-DZ200 • See page 21 for Circuit Boards Location. 5-25. PRINTED WIRING BOARD – I/O BOARD (SIDE B) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 J201 MONITOR OUT AUDIO IN VIDEO IN VIDEO/SAT...

  • Page 47: Schematic Diagram - I/O Board (1/2)

    HCD-DZ200 • See page 53 for IC Block Diagram. 5-26. SCHEMATIC DIAGRAM – I/O BOARD (1/2) – 3 7 6 3 1 5 1 5 0 CN101 C102 C109 R603 Q605 RT1P141C-TP-1 L101 CN602 C619 C615 TP625 R606 R631...

  • Page 48: Schematic Diagram - I/O Board (2/2)

    HCD-DZ200 • See page 51 for Waveforms. 5-27. SCHEMATIC DIAGRAM – I/O BOARD (2/2) – 3 7 6 3 1 5 1 5 0 (Page 47) C212 C245 C209 IC204 IC204 IC201 NJM2285V BH7868FS-E2 R229 C223 -TE2 C210 VIDEO TP223 2 .

  • Page 49: Printed Wiring Board - Audio In/Out Section

    HCD-DZ200 5-28. PRINTED WIRING BOARD – AUDIO IN/OUT SECTION – • See page 21 for Circuit Boards Location. :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location D821 J801 D822...

  • Page 50: Schematic Diagram - Audio In/Out Section

    HCD-DZ200 • See page 53 for IC Block Diagram. 5-29. SCHEMATIC DIAGRAM – AUDIO IN/OUT SECTION – 3 7 6 3 1 5 1 5 0 L813 R863 R866 R670 R671 Q809 2SC5938-T112-1B R868 C884 C639 R683 R643 4.7k 0.01...

  • Page 51: Printed Wiring Board - Ms-203 Board

    HCD-DZ200 • See page 21 for Circuit Boards Location. 5-30. PRINTED WIRING BOARD – MS-203 BOARD – 5-31. SCHEMATIC DIAGRAM – MS-203 BOARD – 3 7 6 3 1 5 1 5 0 :Uses unleaded solder. MS-203 BOARD CN001...
  • Page 52 HCD-DZ200 3 7 6 3 1 5 1 5 0 • Waveforms • IC Block Diagrams – MAIN Board – – DMB10 Board – – I/O Board – IC602 MC14052BDR2 IC203 NJM2235V (TE2) IC102 6 (DVDRFIP) IC102 <z.n (YUV2) IC509 qg (XIN) 2.4 Vp-p...
  • Page 53 HCD-DZ200 3 7 63 1515 0 – MAIN Board – IC101-106 CXD9774M GVDD B GVDD GVDD B BST B DVDD DREG DREG GND 1 PVDD B GATE PWM BP 2 PVDD B RECEIVER DRIVE OUT B TIMING GND 3...
  • Page 54 HCD-DZ200 3 7 63 1515 0 – FL Board – IC802 PT6315 Grid driver Multiplexed driver SEG19/GRID10 Command decoder LED1 SEG18/GRID11 LED2 Display memory LED3 SEG17/GRID12 24 bits x 12 words LED4 Timing generator key scan DOUT L 13942296513...
  • Page 55 HCD-DZ200 3 7 63 1515 0 • IC Pin Function Description MAIN BOARD IC509 M30620MCP-A01FPU0 (SYSTEM CONTROLLER) Pin No. Pin Name Description DAMP SCDT/ Digital amp (IC108 to 110) data output DIAT_SDATA DAMP SHIFT/ Digital amp (IC108 to 110) data output (not used)
  • Page 56 HCD-DZ200 3 7 63 1515 0 Pin No. Pin Name Description Flash Write CE (not used) DRIVE_RST(EN) Driver signal reset DRIVE_OCP(DIAG) Digital amp (power driver) diag input OVERFLOW1 Over flow status1 of digital amp input (IC110) OVERFLOW2 Over flow status2 of digital amp input (IC108 to 110)
  • Page 57 HCD-DZ200 3 7 63 1515 0 Pin No. Pin Name Description MODEL Model select input KEY2 Key input 2 input KEY1 Key input 1 input — Ground KEY0 Key input 0 input VREF Reference Voltage (+3.3V) Power supply (+3.3V)
  • Page 58 HCD-DZ200 3 7 63 1515 0 DMB10 BOARD IC102 CXD9804R (CD/DVD RF AMP, FOCUS/TRACKING ERR AMP, DVD SYSTEM PROCESSOR, DIGITAL SERVO PROCESSOR) Pin No. Pin Name Description AGND — Terminal Ground DVDA AC coupled input path A DVDB AC coupled input path B...
  • Page 59 HCD-DZ200 3 7 63 1515 0 Pin No. Pin Name Description DSEL — Not Used WIDE Wide switch signal input tenminal Mute signal control input MAMUTE MAMUTE signal output to System Controller (IC509) (not used) DVDD18 — Power Supply (+1.8V)
  • Page 60 HCD-DZ200 3 7 63 1515 0 Pin No. Pin Name Description IR control signal input (not used) INT0 External interrupt0 (not used) DQMO DQM0 signal output to SD-RAM (IC104) MREQ DQM signal input Data bus 7 from SD-RAM (IC104) DVSS —...
  • Page 61 HCD-DZ200 3 7 63 1515 0 Pin No. Pin Name Description — Not Used DVDD18 — Power Supply (+1.8V) — Not Used DVSS — Terminal Ground LIMSW LIMSW signal output to Optical pick-up OCSW SEN signal input from System Controller (IC509)/OCSW signal input VCLK —...
  • Page 62 HCD-DZ200 3 7 63 1515 0 Pin No. Pin Name Description ASDATA2 Auio serial data XRST — Not Used DVDD18 — Power Supply (+1.8V) ASDATA4 Auio serial data (not used) DVSS — Terminal Ground DWIDE — Not Used SDPIF —...

  • Page 63: Exploded Views

    HCD-DZ200 SECTION 6 3 7 63 1515 0 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • The mechanical parts with no reference The components identified by mark 0 or may have some difference from the original number in the exploded views are not supplied.

  • Page 64: Front Panel Section

    HCD-DZ200 3 7 63 1515 0 6-2. FRONT PANEL SECTION not supplied supplied supplied supplied supplied supplied L 13942296513 including S800 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 2-546-006-01 KNOB (VOL) 1-828-361-11 WIRE (FLAT TYPE) (19 CORE) 2-546-002-01 WINDOW (FL) 3-087-053-01 +BVTP2.6 (3CR)

  • Page 65: Chassis Section

    HCD-DZ200 3 7 63 1515 0 6-3. CHASSIS SECTION supplied supplied supplied supplied F901 not supplied L 13942296513 DVD mechanism deck section (CDM85-DVBU102) not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-077-331-01 +BV3 (3-CR)

  • Page 66: Dvd Mechanism Deck Section (Cdm85-Dvbu102)

    HCD-DZ200 3 7 63 1515 0 6-4. DVD MECHANISM DECK SECTION (CDM85-DVBU102) not supplied not supplied not supplied not supplied not supplied not supplied not supplied not supplied L 13942296513 supplied Ref. No. Part No. Description Remark Ref. No.

  • Page 67: Electrical Parts List

    HCD-DZ200 SECTION 7 DMB10 3 7 63 1515 0 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • RESISTORS When indicating parts by reference number, parts list may be different from the parts All resistors are in ohms.
  • Page 68 HCD-DZ200 DMB10 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C205 1-164-230-11 CERAMIC CHIP 220PF FB112 1-414-226-21 INDUCTOR, FERRITE BEAD C206 1-164-230-11 CERAMIC CHIP 220PF FB113 1-414-226-21 INDUCTOR, FERRITE BEAD...
  • Page 69 HCD-DZ200 DMB10 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R113 1-211-977-11 METAL CHIP 0.5% 1/10W R228 1-216-864-11 SHORT CHIP R114 1-216-845-11 METAL CHIP 100K 1/10W R230 1-218-893-11 METAL CHIP 0.5%...
  • Page 70 HCD-DZ200 DMB10 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R3605 1-216-864-11 SHORT CHIP C815 1-162-960-11 CERAMIC CHIP 220PF R3606 1-216-864-11 SHORT CHIP C816 1-162-960-11 CERAMIC CHIP 220PF R3607 1-216-864-11 SHORT CHIP...
  • Page 71 HCD-DZ200 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R820 1-216-845-11 METAL CHIP 100K 1/10W A-1110-641-A I/O BOARD, COMPLETE ******************* R821 1-216-864-11 SHORT CHIP R822 1-216-864-11 SHORT CHIP < CAPACITOR >...
  • Page 72 HCD-DZ200 IPOD 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > R606 1-216-829-11 METAL CHIP 4.7K 1/10W R609 1-216-817-11 METAL CHIP 1/10W CN101 1-568-828-11 CONNECTOR, FFC 9P R610...
  • Page 73 HCD-DZ200 IPOD MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < JACK > C106 1-164-346-11 CERAMIC CHIP C108 1-100-566-91 CERAMIC CHIP 0.1uF J603 1-566-822-51 JACK (AUDIO IN) C109 1-100-566-91 CERAMIC CHIP 0.1uF...
  • Page 74 HCD-DZ200 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C200 1-164-156-11 CERAMIC CHIP 0.1uF C292 1-162-966-11 CERAMIC CHIP 0.0022uF 10% C201 1-125-898-91 CERAMIC CHIP 0.22uF C296 1-163-021-91 CERAMIC CHIP 0.01uF...
  • Page 75 HCD-DZ200 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 C918 C381 1-162-970-11 CERAMIC CHIP 0.01uF 1-113-925-11 CERAMIC 0.01uF 250V C382 1-162-964-11 CERAMIC CHIP 0.001uF 0 C920 1-113-925-11 CERAMIC 0.01uF...
  • Page 76 HCD-DZ200 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D204 6-500-260-01 DIODE P6SMB39AT3 IC105 6-704-802-01 IC CXD9774M D205 6-500-260-01 DIODE P6SMB39AT3 IC106 6-704-802-01 IC CXD9774M D206 6-500-260-01 DIODE P6SMB39AT3...
  • Page 77 HCD-DZ200 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark L945 1-414-398-11 INDUCTOR 10uH R141 1-216-864-11 SHORT CHIP L947 1-414-398-11 INDUCTOR 10uH L948 1-414-398-11 INDUCTOR 10uH R142 1-216-864-11 SHORT CHIP...
  • Page 78 HCD-DZ200 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R304 1-216-809-11 METAL CHIP 1/10W R366 1-216-845-11 METAL CHIP 100K 1/10W R305 1-216-809-11 METAL CHIP 1/10W R306 1-216-809-11 METAL CHIP...
  • Page 79 HCD-DZ200 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R484 1-216-833-11 METAL CHIP 1/10W R695 1-216-809-11 METAL CHIP 1/10W R487 1-216-833-11 METAL CHIP 1/10W R696 1-216-809-11 METAL CHIP 1/10W...
  • Page 80 HCD-DZ200 MAIN MS-203 STBY 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 R903 1-215-929-11 METAL OXIDE 100K < VIBRATOR > 0 R904 1-215-929-11 METAL OXIDE 100K X450 1-795-660-21 QUARTZ CRYSTAL UNIT 49.152MHz...
  • Page 81 HCD-DZ200 3 7 63 1515 0 MEMO L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 82 HCD-DZ200 3 7 63 1515 0 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page.

Table of Contents