Introduction Table of Contents Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Note • Before operating the TV, please read “Safety Information” (page 2). • Instructions about “Installing the TV to the Wall” are included within this TV’s instructions manual.
Page 3
AC power outlet (mains socket). • Before transporting the TV set, disconnect all cables. Use only Sony supplied AC power cords (mains lead), not those • Two or three people are needed to transport a large TV set.
Page 4
TV may be immediately if any of the following problems occur. damaged by airborne sulphur, etc. Ask your dealer or Sony service centre to have it checked by qualified service personnel. When: • For best picture quality, do not expose the screen to direct ...
3D video images or playing • Although this unit transmits/receives scrambled signals, be stereoscopic 3D games. Sony recommends that all viewers take careful of unauthorised interception. We cannot be responsible regular breaks while watching 3D video images or playing for any trouble as a result.
Page 6
WALL-MOUNT BRACKET Attention statement is subject matter of BEE, and applicable if functions is available. • If you use the TV installed on the Wall-Mount Bracket for a long ** ”Home mode” conditions are as per BEE guideline only. time, the wall behind or above the TV may become discoloured or the wallpaper may come unglued, depending on the material Notice for customer in UAE of the wall.
Parts and Controls Controls and Indicators Remote Control sensor* (Input select) Light sensor* / Illumination LED / Display and select the input source. 3D Sync Transmitter* The Illumination LED lights up or blinks *1 Do not place anything near the sensor. according to the status of the TV.
• When connecting a large USB device, software from the Sony support website using your PC. For details on how to upgrade, please visit the connect to the USB 1 socket.
Using Remote Control Remote Control Parts Description / (Input select/Text hold) FOOTBALL In TV mode: Display and select the input Turn Live Football Mode on or off (when the source. feature is available). In Text mode: Hold the current page. ...
Page 10
Internet. If you do not have a network connection, you will be able to download the Adjust the volume. software from the Sony support website using your PC. For details on how to upgrade, please visit the (Jump) Sony support website.
To connect with analogue extension Connecting the TV cable Availability depends on countries/regions/TV Note models. • When connecting the cable to the Cable/Antenna, input finger tighten only, over-tightening the connection can damage the TV. To connect with an HDMI cable <...
Page 12
Picture Quality • AV composite cable • Component cable • HDMI cable • Antenna (aerial) cable Standard definition (SD) videos have picture signals with a High definition (HD) videos have picture signals vertical resolution of 480 (NTSC) or 576 (PAL/SECAM) lines. with a vertical resolution of 720 or 1,080 lines.
To Sony Dealers and Contractors Sufficient expertise is required for installing this product. Be sure to read this instruction manual thoroughly to do the installation work safely. Sony is not liable for any damages or injury caused by mishandling or improper installation.
Page 14
Installing the Brackets on the wall Prepare necessary items. Wall-Mount Bracket accessories Paper Template Wall-Mount Base (1) Stand Protector (2) Screw (+PSW M8 × 12) Spacers (2) Stand Screws for Wall-Mount Base (8 mm in diameter, not supplied) Make sure that the wall has enough space for the TV and is capable of supporting a weight of at least four times that of the TV.
Page 15
Unit: mm Display dimensions Screen centre dimension Length for mounting Model Name KDL- 55W800C 1,230 50W800C 1,116 43W800C Note • Figures in the table may differ slightly depending on the installation. Make a mark on the Paper Template A that indicates the centre of the screen for your TV. Scale on Paper Template A Mark for KDL-55W800C...
Page 16
Preparing for the installation of the TV Insert the pin (on the Stand Protector C) into the hole on the Stand B, then fold up the Stand Protector C. Confirm the Stand Protector C is firmly latched to the Stand B. Attach the Stand B to the TV using the supplied screws D.
Page 17
Installing the TV on the wall Make sure to connect and bundle the cables before installing the TV on the wall. Install the TV on the wall. Then, confirm the Stand Protector C is firmly latched into the Wall-Mount Base B and the Spacers E touch the wall. Wall Wall Dimensions of the hole positions on the wall...
Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.
Page 19
SU-WL450 Attach Wall-Mount Attachment (supplied with the TV) to the rear of the TV (to make it parallel with the wall). 1.5 N∙m {15 kgf∙cm} Soft cloth Note • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. •...
Page 20
Unit: mm Screen Display centre Length for mounting dimensions dimension Model Name KDL- Standard Slim Standard Slim mounting mounting mounting mounting 55W800C 1,230 50W800C 1,116 43W800C Note • Figures in the table may differ slightly depending on the installation. • When your TV is installed on the wall, the upper side of the TV slightly leans forward. Attach the Attachment parts for Wall-Mount Bracket.
Page 21
Screw (+PSW 6 x 20) Screw (+PSW 6 x 20) Pulley Spacer (20mm) Belt Soft cloth Connect necessary cables to the TV. Note • You cannot access to any terminal after installing the TV to the wall. Install the TV to the Base.
See below illustration for location of the buttons If the problem persists, contact your dealer or on the TV. Sony service centre with the number of times Rear of TV the illumination LED flashes red (interval time is three seconds). Disconnect the AC power cord (mains lead), and inform your dealer or Sony service centre.
Cannot connect to a wireless router by WPS (Wi-Fi Protected Setup). Specifications If you use WEP security, select [Easy] t [Wi-Fi] t [Connect by scan list]. Then, select the network System name (SSID) you want to connect. Panel system Cannot find the required network name in LCD (Liquid Crystal Display) Panel, LED Backlight network setup.
Page 24
MHL (common with HDMI IN 1) Power and others Video (2D): 1080p (30 Hz), 1080/24p, Power requirements 1080i (50, 60 Hz), 720p (30, 50, 60 Hz), 19.5 V DC with AC adapter 720/24p, 576p, 576i, 480p, 480i Rating: Input 100 V - 240 V AC, 50/60 Hz Video (3D): Energy Efficiency Class (For Jordan and Mauritius Side-by-Side: 1080/24p, 1080i (50, 60 Hz),...
4 AVC) digital terrestrial signals are owned by the Bluetooth SIG, Inc. and any broadcast. Please confirm with your local use of such marks by Sony Corporation is dealer if you can receive a DVB-T/DVB-T2 under license. Other trademarks and trade signal where you live.