Advertisement
Quick Links
4-466-324-11(2)
Checking the
accessories
Table-Top Stand (1)*
Fixing screws for Table-Top Stand (M5 × 16) (2)
Remote control (1)
LCD TV
AC power cord (mains lead) (1)
AC adapter (1)
Cable holders (3)
Size AAA batteries (R03 type) (2)
Operating Instructions
Operating Instructions (this manual) and other
documents
Wall-Mount Bracket accessories
(KLV-46/40R472A, KLV-32/24R422A only)
* Refer to the supplied Table-Top Stand leaflet to assemble
the Table-Top Stand.
1: Attaching the Table-
Top Stand
• If using an electric screwdriver, set the tightening torque at
approximately 1.5 N·m (15 kgf·cm).
x
KLV-46/40R452A, KLV-40R457A, KLV-32R407A,
KLV-32/24R402A:
Thick and
soft cloth
Customer support
© 2013 Sony Corporation Printed in Malaysia
KLV-46R472A / 46R452A / 40R472A / 40R457A / 40R452A / 32R422A / 32R407A / 32R402A / 24R422A / 24R402A
Viewing pictures from the connected
Introduction
Trademark information
•
Thank you for choosing this Sony product. Before operating the TV,
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
please read this manual thoroughly and retain it for future reference.
trademarks or registered trademarks of HDMI Licensing LLC in the
equipment
~
United States and other countries.
•
•
Instructions about "Installing Wall-Mount Bracket" are included within
Manufactured under license from Dolby Laboratories.
•
"BRAVIA" and
are trademarks of Sony Corporation.
this TV's instructions manual.
•
•
MHL, Mobile High-Definition Link and the MHL Logo are trademarks
The illustrations used in this manual may differ depending on your
TV model.
or registered trademarks of MHL Licensing, LLC.
Turn on the connected equipment, then press
•
•
Manufactured under license from DTS Licensing Limited. For U.S.
The illustrations of the remote control used in this manual are of the
connected equipment list.
and worldwide patent and trademark information, see
RM-GA024 unless otherwise stated.
Rear View
•
Before operating the TV, please read Safety Information. Retain this
www.dts.com/patents/legacy.aspx.
manual for future reference.
(c) DTS Licensing Limited and DTS, Inc. 2012.
Location of the identification label
Labels for TV Model No. and Power Supply rating (in accordance with
applicable safety regulation) are located on the rear of the TV. Labels
for AC adapter Model No. and Serial No. are located at the bottom of
AC adapter.
Notice for customers in South Africa
The Euro/South Africa converter plug should be fitted as follows.
1 Insert the power supply or CEE7 plug in to the
converter plug.
2 Use an appropriate screwdriver to attach the
screw tightly without damaging the screw
head.
3 TEST: Grip the converter plug, and pull the
VDE cord set/transformer to ensure it is fully
secure, if not then increase the torque setting
and further tighten.
*
Terminals and labels may vary depending on TV model.
1
Re-test.
*
12V may vary depending on country.
2
The converter plug is now ready for use.
(except KLV-40R457A,
A HDMI IN / MHL, HDMI IN 2 / MHL and HDMI IN 1(ARC) (Home Theatre systems, Camcorder, Blu-ray Disc
KLV-32R407A)
player, DVD player, PC with HDMI output and Mobile device).
Connect to the HDMI IN jack if the equipment has an HDMI jack.
Disposal of the TV set
If the equipment is compatible with MHL, connect the MHL jack of the equipment to the HDMI IN / MHL or HDMI
Disposal of Old Electrical & Electronic
IN 2 / MHL jack through a MHL - HDMI cable (not supplied).
Equipment (Applicable in the European
If connecting a digital audio system that is compatible with Audio Return Channel (ARC) technology, use HDMI IN
(KLV-40R457A,
Union and other European countries with
KLV-32R407A only)
1 (ARC). If not, an additional connection with AUDIO OUT (Refer D) is necessary.
separate collection systems)
~
• The HDMI jacks can support PC timing in HDMI PC mode. Refer PC input signal reference chart under "PC settings".
• Be sure to use only an authorized HDMI cable bearing the HDMI logo, or an authorized MHL cable bearing the MHL
This symbol is on the remote control and AC adapter.
logo.
• HDMI IN 1 (ARC) is available depending on your TV model.
Disposal of the TV set
Disposal of Old Electrical & Electronic
B (Digital still camera, Camcorder, USB storage media)
Equipment (Applicable in Republic of
Access photo/music/video files stored on a USB device.
India)
C HDMI AUDIO IN or HDMI 2 AUDIO IN (PC and other audio devices )
India only
Connect to the
HDMI AUDIO IN or HDMI 2 AUDIO IN. It is recommended to use an audio input (stereo
minijack).
This symbol indicates that this product shall not be treated as
household waste and may not be dropped in garbage bins. Product
D AUDIO OUT
owners are advised to deposit their product at the nearest collection
point for the recycling of electrical and electronic equipment.Your
Connect with an audio cable or headphones. You can listen to TV sound through your stereo system or
co-operation shall facilitate proper disposal & help prevent potential
headphones. You can select "Variable" or "Fixed" in the "Audio Out" menu.
negative consequences/hazards to the environment and human health,
which could otherwise be caused by inappropriate waste disposal
E
including improper handling, accidental breakage, damage and/ or
Connect AC adapter to the
improper recycling of e-waste.The recycling of materials will help
to conserve natural resources. For more detailed information about
F VIDEO IN
/COMPONENT IN/AUDIO
recycling of this product, please contact your local civic office, your
household waste disposal service provider or the store where you
camcorder, DVD player with component output)
made the purchase. You may contact our company's toll free number in
Connect to the VIDEO IN
India for assistance.
(MONO) jack.
For better picture quality, component connection is recommended if your DVD player has a component video
output. Connect to the COMPONENT IN jacks.
x
KLV-46/40R472A, KLV-32/24R422A:
x
KLV-46/40R472A, KLV-32/24R422A:
Thick and soft cloth
Thick and
soft cloth
Detaching the Table-Top Stand
from the TV
~
• Do not remove the Table-Top Stand for any reason other
than to wall-mount the TV.
x
KLV-46/40R452A, KLV-40R457A, KLV-32R407A,
KLV-32/24R402A:
Thick and soft cloth
Using Menu
Functions
/
on the remote control or CH/INPUT on the TV to display the
Favourites
Photo
Music
Video
*1
F
Photo Frame Mode
A
FM Radio
Settings
Exit
*1
C
D
*2
E
B
• To exit Home menu:
1 Favourites
Store up to 18 channels or external inputs.
x
To add a current channel or external inputs
into Favourites list
1
2
OR
"Favourites"
"Add to Favourites"
red
x
To watch a channel or external input
Favourites
TV
9
/ (Stereo systems, Headphone)
Add
Delete
jack.
Select
Confirm
(DVD player, VCR, Video game equipment, S VHS/Hi8/DVC
jack and the AUDIO
jacks. If you connect mono equipment, connect to the L
~
• To exit Favourites List:
• When you run the "Auto Tuning", only the programme
channels in your Favourites list will be cleared.
2: Connections
Connecting audio/video devices
Connecting an antenna (aerial)/
cable
Antenna (aerial) cable (not supplied)
Connecting an antenna (aerial)/
cable and VCR
AV cable
Antenna
(not supplied)
(aerial)
cable (not
supplied)
AV cable
DVD recorder
(not
supplied)
Antenna (aerial) cable
(not supplied)
VCR
~
2 Photo/
Music/
Video
• While the TV is accessing the data on the USB device, do
not turn off the TV or connected USB device, disconnect
Playback photo/music/video files via USB devices.
the USB cable, or remove the USB device.
• Sony will not be held liable for any damage to, or loss of,
Side View
data on the recording media due to a malfunction of any
connected devices or the TV.
• The file name and folder name may not display correctly
in some cases.
• When you connect a Sony digital still camera, set the
camera's USB connection mode to Auto or Mass Storage.
1
For more information about USB connection mode, refer to
the instructions supplied with your digital camera.
2
"Photo"/"Music"/"Video"
• Check the website below for updated information about
compatible USB devices.
3
http://www.sony-asia.com/bravia/flash.html
4
• Use a USB storage device that is compliant with USB
5
mass storage device class standards.
USB Video format
Extension
Container
Video Codec
Audio Codec
z
red
PCM, AC3,
• If more than one USB detected:
"Device
MPEG1
Selection"
MPEG1, MPEG2,
Layer1/2,
• If you connect the USB device when "USB Auto Start"
.avi
AVI
XviD, MPEG4,
MPEG2 AAC,
is set to "On", the thumbnail view of photo/music/video
H.264, MJPEG
MPEG4 AAC,
appears automatically.
MPEG4 HE-AAC,
WMA V8, MP3
x
To adjust the picture and sound setting
WMV V9, Xvid,
.wmv, .asf
ASF
MP3, WMA V8
(Video)
MPEG4, VC-1
When playing video
MPEG1
Layer1/2, MP3,
.mp4,
MPEG4, H.264,
MP4
MPEG2 AAC,
.mov, .3gp
H.263, MJPEG
MPEG4 AAC,
MPEG HE-AAC
PCM, MP3,
"Picture" / "Sound"
MPEG1
Layer1/2,
WMV V9,
x
To play a photo as slideshow (Photo)
MPEG2 AAC,
MPEG4, H.264,
MPEG4 AAC,
.mkv
MKV
VC-1
MPEG4 HE-AAC,
AC3, WMA V8
DTS, DTS 2.0
VP8
VORBIS
MPEG1
.mpg,
MPEG1
MPEG1
Layer1/2, MP3,
.mpeg,
AC3
.vob, .vro
green
MPEG2PS
MPEG1, MPEG2
DTS, DTS 2.0
OR
MPEG1Layer
1/2, MP3,
MPEG2 AAC
Exit
MPEG2, H.264,
.ts, .m2ts
MPEG2TS
MPEG4 HE-AAC,
VC-1
AC3, MPEG4
AAC
"Slideshow"
DTS, DTS 2.0
~
USB Music format
• To stop slideshow:
"Stop Slideshow"
Extension
Audio Codec
.mp3
MPEG1 Audio Layer 3
.wma
WMA V8
.wav
LPCM
x
Connecting MHL device
3: Preventing the TV
Overview of the
from toppling over
TV controls and
indicators
*Anchor bolts (M6 / M4) (not supplied)
Front View
Strong cord
(not supplied)
Use authorized
MHL2 cable with
MHL logo (not
MHL device
supplied)
* KLV-46/40R472A, KLV-46/40R452A, KLV-40R457A,
KLV-32R422A, KLV-32R407A, KLV-32R402A:
Remote sensor
The MHL (Mobile High-Definition Link) enables the TV
Use M6 anchor bolts
to communicate with a connected MHL-compatible
* KLV-24R422A, KLV-24R402A:
device. The TV can charge the connected MHL-
Use M4 anchor bolts
compatible device while playing photo/music/video
4: Performing the
from it. You can use the TV remote control to control the
connected MHL-compatible device.
initial setup
~
~
• Do not put anything over the sensor, doing so may affect
• If "Auto Input Change (MHL)" is set to "On", the TV
its function.
automatically switches to "HDMI / MHL" or "HDMI 2 / MHL"
(depending on your TV model) from other input when
Back View
1
MHL-compatible device is connected to HDMI IN / MHL
or HDMI IN 2 / MHL jack. The availability of "Auto Input
*
Change (MHL)" depends on whether the MHL-compatible
device can support this feature.
• You can continue normal usage of the connected MHL-
compatible device (such as receiving calls) depending on
* 12V may vary depending on country
its capability.
• Some remote control functions may not be available
~
depending on features of the connected MHL-compatible
• When the TV is in standby mode (the 1 (standby)
device. Please refer to the device manual for details.
indicator on the TV front panel is red), press "/1 on the
• This product is officially MHL-certified for operation
remote to turn on the TV.
Power
with other MHL-certified devices. If you encounter any
Turns the TV on or
• Make sure that the TV is completely turned off before
problems when using the MHL function, please consult the
unplugging the AC power cord (mains lead) or DC cable.
switch to standby
device manufacturer for support.
Unplugging the AC power cord (mains lead) or DC cable
mode.
while the TV is turned on may cause the TV to malfunction.
2
CH/INPUT
• Press button until
"Rr Programme +/-"
appears and selects
channels with Volume
button.
• Press button until "Rr
Follow the instructions on the screen.
Input select" appears
~
and selects input
• You can also tune channels manually.
source with Volume
• Language options vary depending on model.
button.
• Select "Home" from "Location" for the best TV settings to
use the TV in the home.
x
To listen to preset stations:
~
USB Photo format
• To exit from "Picture Off": Any key except
1
2
Extension
Image Codec
In FM Radio mode
In FM Radio mode
~
.jpg, .jpe, .jpeg
JPEG
• To exit FM Radio mode:
DCF2.0 or EXIF2.21 supported.
• If the station has a noisy sound, press B/b to improve the
sound quality.
~
"Settings"
• If the FM stereo programme has static noise, press
OR
• Playback of the above file formats is not guaranteed.
"FM Radio Presets"
until "Mono" appears to reduce noise.
• The USB device supports FAT16 , FAT32 and NTFS.
"Channel Set-up"
5 Settings
3 Photo Frame Mode
"FM Radio Set-up"
(KLV-46/40R472A,
You are able to change the settings of your TV from
"Settings" menu
"FM Radio Presets"
KLV-32/24R422A only)
x
To select setting options
~
Display Photo, Music and Clock calendar at the same
• To exit "Channel Set-up" menu:
time.
• To select desired preset FM Radio stations:
/
x
To enter Photo Frame Mode
1
2
"Photo Frame Mode"
"Settings"
x
To listen to non-preset stations:
In FM Radio mode
To select "Settings" category
"Set-up"
OR
To search desired station
To tune FM frequency
"Photo Frame Settings"
/
"Image
Selection"/"Music
~
Selection"
• To exit the setting mode:
~
• The options you can adjust vary depending on the
~
• If "Please set-up FM Radio." appears, perform
situation. Unavailable options are greyed out or not
• To exit Photo Frame mode:
/
To listen to preset stations.
displayed.
x
To show photo or picture while listening to
Picture
4 FM Radio
FM Radio
Picture Mode Sets a picture mode.
In FM Radio mode
~
Reset
Resets all the "Picture" settings to
• For first time using FM Radio function:
factory settings, except "Picture Mode"
and "Intelligent Picture Plus Set-up".
Backlight
Adjusts the brightness of the backlight.
"Settings"
"Photo Frame Mode" (KLV-46/40R472A,
Picture
Increases or decreases picture
"Channel Set-up"
contrast.
KLV-32/24R422A only)
OR
Brightness
Brightens or darkens the picture.
"FM Radio Set-up"
"Slideshow" / "Picture Frame"
Colour
Increases or decreases colour
~
intensity.
"Auto Tuning"
• To exit "Photo Frame Mode"/"Slideshow"/"Picture Frame":
• To access FM Radio mode:
Hue
Increases or decreases the green
tones and red tones.
Sharpness
Sharpens or softens the picture.
"FM Radio"
x
To reduce power consumption in FM Radio
Colour
Adjusts the whiteness of the picture.
1
2
Temperature
Noise
Reduces the picture noise (snowy
"Settings"
Reduction
picture) in a weak broadcast signal.
OR
"Power Saving"
MPEG Noise
Reduces the picture noise in MPEG-
"Eco"
Reduction
compressed video.
"Power Saving"
Overview of the remote
Selects input source.
In Text mode: Holds the current
Turns the TV on or switch to standby
mode.
page.
Displays the BRAVIA Sync Menu and
Exit Text mode, or switches to a TV
display when displaying external
then select connected HDMI/MHL
equipment from "Device Selection".
input.
Dual Sound.
In TV mode: Selects channels.
In Text mode: Selects pages.
Displays text information.
Selects the desired wide mode.
Available when operation guide
appears on the screen.
Power/Standby indicator
Displays information about the
• Lights up in red when in
Sets the desired time frame to turn
programme/input or reveals hidden
standby.
information in Text mode.
off TV automatically.
• Lights up in green when
the TV is turned on.
Selects, adjusts or confirmed
• Flashes while the remote is
selected items.
being operated.
Returns to the previous screen.
Displays a list of shortcuts to some
In USB mode: Stops the playback.
setting menus.
Returns to the previous channel or
Displays or cancels the menu.
input watched (for more than 15
seconds).
In TV mode: Selects the next or
Adjusts volume.
previous channel.
In Text mode: Selects the next or
previous page.
Mute or restore sound.
Operates the BRAVIA Sync and
USB compatible equipment that is
connected to the TV.
Volume
• Adjusts volume.
• Moves through
x
To change the Wide Mode
options up and
down when
For TV, Video, Component or HDMI (except PC input)/ MHL
HDMI PC Input (PC timing)
selecting channels
Wide Zoom*
Normal
Full
Zoom*
Normal
Full 1
or input source.
* Parts of the top and bottom of the picture may be cut off.
~
• Some options may not be available depending on the signal source.
Cinema Drive Provides improved picture movement
Screen
/
when playing BD (Blu-ray Disc), DVD
Wide Mode
Refer (To change the Wide Mode).
or VCR images taken on film, reducing
picture blur and graininess.
Auto Wide
Automatically changes the wide mode
according to the input signal from
~
an external equipment. To keep your
• If the image contains irregular signals or too much noise,
setting, select "Off".
"Cinema Drive" is automatically turned off even if "Auto"
is selected.
z
Advanced
Set "Picture" settings in more detail.
• Even if "Auto Wide" is set to "On" or "Off", you can
Settings
always modify the format of the screen by pressing
repeatedly.
Intelligent
Enhances picture quality according to
Picture Plus
preferred settings, channel or video
4:3 Default
Selects the default screen mode for
use with 4:3 broadcasts.
Set-up
input.
Auto Display
Selects "On" to automatically adjusts
Sound
Area
the display area based upon the
Settings
Sound Mode Sets a sound mode.
content or "Off" to choose from the
Picture
Sound
"Display Area" options.
Screen
Reset
Resets all the "Sound" settings to
Channel Set-up
factory settings, except "Sound Mode",
Display Area Adjusts the picture display area.
Parental Lock
"Dual Sound", "Speakers", "Audio Out"
Set-up
Horizontal
Adjusts the horizontal position of the
Eco
and "HDMI/DVI Audio Source".
Shift
picture when "Wide Mode" is set to
7 Band
Adjusts sound frequency settings.
"Wide Zoom" or "Zoom".
Equaliser
To modify the setting
Vertical Shift Adjusts the vertical position of the
Sound
Produces a fuller sound for more
picture when "Wide Mode" is set to
/
Booster
impact.
"Wide Zoom" or "Zoom".
Clear Voice
Makes voice sound clearer.
PC Settings
Selects screen mode or adjusts the
display position, phase and pitch of the
Simulated
Adds a surround-like effect to mono
picture when the TV receives an input
Stereo
programmes.
signal from the connected PC.
Intelligent
Minimizes the difference in volume
PC input signal reference chart for HDMI IN 1, 2
Volume
level between all programmes and
adverts.
Balance
Emphasises left or right speaker
balance.
Volume Offset Adjusts the volume level of the current
input relative to other inputs.
VGA
640
480
31.5
Dual Sound
Sets the sound from speaker for a
SVGA
800
600
37.9
stereo or bilingual broadcast.
~
XGA
1024
768
48.4
• If the stereo sound is noisy when receiving a NICAM
programme, select "Mono". The sound becomes
WXGA
1280
768
47.4
monaural, but the noise is reduced.
WXGA
1280
768
47.8
• If you select other equipment connected to the TV, set
WXGA
1360
768
47.7
"Dual Sound" to "Stereo", "Main" or "Sub". However,
when the external equipment connected to the HDMI jack
SXGA*
1280
1024
64
(except HDMI 1) is selected, this is fixed to "Stereo".
HDTV*
1920
1080
67.5
• If you access to FM Radio mode, set "Dual Sound" to
"Stereo" or "Mono".
* KLV-46/40R472A, KLV-46/40R452A, KLV-40R457A only
~
Speakers
Selects sound output from TV speakers
• This TV's PC input does not support Sync on Green/
or external audio equipment.
Composite Sync and interlaced signal.
Audio Out
Selects whether to control external
• This TV's PC input supports signals in the above chart
audio system through TV remote
with a 60 Hz vertical frequency.
control.
Channel Set-up
~
• When the input source is set to "Headphone" in the
1 Digit Direct When "1 Digit Direct" is set to "On",
"Headphone/Audio Out" under the "AV Set-up" menu,
select a channel using one preset
"Audio out" is not available in the list.
number button (0 - 9) on the remote.
Full 2
60
VGA
VESA
60
Guidelines
VESA
60
Guidelines
60
VESA
60
VESA
60
VESA
60
VESA
60
EIA
Advertisement
Related Manuals for Sony Bravia KLV-46R472A
Summary of Contents for Sony Bravia KLV-46R472A
- Page 1 Manufactured under license from Dolby Laboratories. • To exit FM Radio mode: Auto Wide Automatically changes the wide mode • Sony will not be held liable for any damage to, or loss of, • “BRAVIA” and are trademarks of Sony Corporation.
- Page 2 TV. Do not push or scratch the front filter, or place objects on top of this TV Ask your dealer or Sony service centre to have it checked by qualified • Location: damage to the TV.