Advertisement
SERVICE MANUAL
1/3" SONY DSP COLOR CCD CAMERA
TRUE DAY & NIGHT (IR-CUT REMOVABLE) &
O.S.D. (ON SCREEN DISPLAY) SERIES
The serial number of this product may be found
on the bottom of the unit.
You should note the serial number of this unit in
the space provided and retain this instruction as a
permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
Advertisement
Table of Contents
Related Manuals for Sony DSP COLOR CCD CAMERA
Summary of Contents for Sony DSP COLOR CCD CAMERA
-
Page 1: Service Manual
SERVICE MANUAL 1/3” SONY DSP COLOR CCD CAMERA TRUE DAY & NIGHT (IR-CUT REMOVABLE) & O.S.D. (ON SCREEN DISPLAY) SERIES The serial number of this product may be found on the bottom of the unit. You should note the serial number of this unit in... -
Page 2: Safety Warning
① CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is interned to alert the user to the presence of uninsulated “dangerous voltage”... -
Page 3: Main Features
It provides the most reliable and accurate color picture in security industries. Main Features Color camera with SONY 1/3” Super HAD CCD sensor in metal case. Employs Digital Signal Processor (DSP) chip-set for image control. Controlled by OSD Menu. - Page 4 ③ Parts Names & Components Hole to fix lens Hex Screwdriver Auto Iris Plug C-Mount Ring Auto iris connector Manual Power LED Selection & setting buttons...
- Page 5 ④ Auto Iris Function DC DRIVE VIDEO DRIVE Pin 1 (Red) Drive - Volt + Pin 2 (N.C) Drive + Pin 3 (White) Damp + IRIS Pin 4 (Black) Damp - Plug in auto iris connector Screw the auto iris lens on CS mount...
-
Page 6: Installation Instructions
⑤ Installation Instructions (1) Remove the cap from the lens mount. (2) Select the C mount lens (with mount ring) or CS mount lens. (3) Screw and fasten the lens into the lens mount. (4) Connect the video output wire between monitor and camera through 75ohm type coaxial cable. -
Page 7: Switch Definition
⑥ Switch Definition UP button LEFT RIGHT button button button DOWN button SET button Press to display the menu. In the menu, this button functions as “ENTER”. UP & DOWN buttons Press to select the item of menu. LEFT & RIGHT buttons Press to change the item value. -
Page 8: Menu Operation
⑦ Menu Operation ‧ Press the SET button to display the menu on screen. ‧ Press the UP or DOWN button to select the item. ‧ The selected item will be displayed in yellow text. ‧ Press the LEFT or RIGHT button to change mode. ‧... - Page 9 ⑧ AGC (Auto Gain Control) Enable this function to heighten the brightness signal automatically. The effective value is between 0 and 255 (0dB ~ 40dB). (Bigger value, more noise). <<ATTENTION>> Disable this function for IR-Cut Removable. WHITE BAL. To change the white balance mode: ‧...
- Page 10 ⑨ 2. Select an ID from A~Z, a~ z, 0, 1~9 by using the UP, DOWN, LEFT and RIGHT buttons. 3. Move the cursor to “C” to clear the letter. 4. Please lock in the letter by using the SET button. 5.
-
Page 11: Specification
Depending on the environment, adjust CONTRAST, SHAPRNESS, CB_GAIN and CR_GAIN for clearer and more colorful image. Specification PICK-UP DEVICE Sony 1/3" Super HAD Normal Resolution CCD Sony 1/3" Super HAD High Resolution CCD SIGNAL PROCESSOR D.S.P. (Digital Signal Processor) RESOLUTION...