Table of Contents
Advertisement
V.
Installation- Tweeters
Choose mounting locations for your Chrome Component System dome
swivel tweeters. Remember that for the best performance, the tweeters
should be mounted as close to the mid-woofers as possible, with an
unobstructed, direct path to the listening area. Check for clearance behind
the tweeter mounting locations, making sure the tweeters will not interfere
with any handles, window cranks, door locks, or brackets. If the tweeters
are to be mounted in the vehicle doors, check the operation of all functions
(windows, locks, and any other switches or hand cranks) to make sure there
is no obstruction. Be sure the mounting location and the drilling of screw
holes for mounting will not present a hazard to any wires, control cables,
fuel lines, fuel tanks, hydraulic lines, or other vehicle systems or
components.
1. Surface or Angle Mount- Using the base plate or angle housing as a
template, mark and drill two 1/8"(3mm) mounting screw holes and a
1/4"(6mm) wire exit hole in the mounting surface. Rotate the bottom
plate of the tweeter and remove it carefully. Do not lose the spring.
Mount the bottom plate or angle housing to the mounting surface with
the screws. Feed the tweeter's attached lead wires through the exit
hole. Carefully, but firmly press the tweeter back against the base plate
or angle housing, matching the slots on the bottom of the tweeter with
the tabs on the base plate or angle housing. Rotate the tweeter body to
lock it into place. Connect speaker wire from the mid-woofer + and -
terminals to the tweeter lead wires, observing correct polarity.
Tweeter
Mounting
Screws
5
Base Plate or
Angle Housing
Tweeter Surface or Angle Mount
Ultimate Sound
Mounting
Surface
Wire
Leads
Advertisement
Table of Contents
