Table of Contents
Advertisement
12
Daily use
The Steam cooking functions
• Always use the steam cooking functions together with the clock functions: Duration
and End
• Do not put the water in the steam generator but in the water tank on the control panel.
• Use only water as a liquid.
• When there is no water left in the water tank, an acoustic signal sounds. When you put
the water in the water tank, the acoustic signal deactivates.
• To have a good effect of the steam cooking, the set time must be more than 10 minutes.
It is because the heat up time is approximately 2 minutes and the automatic steam sup-
ply is approximately 5 minutes.
Steam Cooking
1. Put the water (approximately 650 ml) in
the water tank on the control panel.
The water supply is for approximately 30
minutes.
2. Activate the appliance.
3. Touch
ing function
4. If it is necessary, Touch
the temperature (between 50°C - 96°C).
5. Touch
6. Touch
Duration or End function.
The first steam shows after approximately
2 minutes. One acoustic signal sounds
when the temperature is approximately 96°C.
Three acoustic signals sound at the end of cooking time.
7. Touch
After the temperature in the appliance decreases, soak up all remaining water from the
steam generator with a sponge. If it is necessary, clean the steam generator with some vin-
egar.
Let the appliance dry fully with the open door.
Interval Steam Cooking
To set the Interval Cooking function do the steps from the procedure for Steam Cooking
but put less water (250 ml).
(refer to "Setting the clock functions").
or
to set the Steam Cook-
.
or
to set Duration or End function.
or
to set the time for the
to deactivate the acoustic signal and the appliance.
to set
- Quick Links:
- Product Description
- Control Panel
Hide quick links:
Advertisement
Table of Contents
