1 WLAN card 2 metal securing tabs (2)
c. Slide the card at a 45-degree angle out of its connector.
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.
NOTE:
Do not insert a Mobile Broadband (WWAN) network card into the WLAN card connector.
NOTE:
The WLAN card may have two or three antenna connectors, depending on the type of card you ordered.
5. Install the card:
NOTICE:
To avoid damaging the WLAN card, never place cables on top of or under the card.
a. Move any antenna cables out of the way to make space for the WLAN card.
b. Align the card with the connector at a 45-degree angle, and press the card into the connector until it clicks.
NOTE:
For more specific information about which cable to connect to which connector, see the documentation that came with your WLAN card.
c. Connect the antenna cables to the WLAN card, ensuring that you route the cables correctly.
Captive Screw
Back to Contents Page