Table of Contents
Advertisement
show pagp
show pagp
Use the show pagp user EXEC command to display Port Aggregation Protocol (PAgP) channel-group
information.
Syntax Description
channel-group-number
counters
internal
neighbor
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.1(19)EA1
12.2(25)SE
Usage Guidelines
You can enter any show pagp command to display the active channel-group information. To display the
nonactive information, enter the show pagp command with a channel-group number.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output are appear.
Examples
This is an example of output from the show pagp 1 counters command:
Switch> show pagp 1 counters
Port
--------------------------------------
Channel group: 1
Gi0/1
Gi0/2
Catalyst 3560 Switch Command Reference
2-502
show pagp [channel-group-number] {counters | internal | neighbor} [ | {begin | exclude |
include} expression]]
(Optional) Number of the channel group. The range is 1 to 48.
Display traffic information.
Display internal information.
Display neighbor information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
The channel-group-number range was changed from 1 to 12 to 1 to 48.
Information
Sent
Recv
45
42
45
41
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
Flush
Sent
Recv
0
0
0
0
78-16405-05
Hide quick links:
Advertisement
Table of Contents
