Table of Contents
Advertisement
show mvr members
show mvr members
Use the show mvr members privileged EXEC command to display all receiver and source ports that are
currently members of an IP multicast group.
Syntax Description
ip-address
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.1(19)EA1
Usage Guidelines
The show mvr members command applies to receiver and source ports. For MVR-compatible mode, all
source ports are members of all multicast groups.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mvr members command:
Switch# show mvr members
MVR Group IP
------------
239.255.0.1
239.255.0.2
239.255.0.3
239.255.0.4
239.255.0.5
239.255.0.6
239.255.0.7
239.255.0.8
239.255.0.9
239.255.0.10
<output truncated>
Catalyst 3560 Switch Command Reference
2-500
show mvr members [ip-address] [ | {begin | exclude | include} expression]
(Optional) The IP multicast address. If the address is entered, all receiver and
source ports that are members of the multicast group appear. If no address is
entered, all members of all Multicast VLAN Registration (MVR) groups are
listed. If a group has no members, the group is listed as Inactive.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Status
------
ACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
Members
-------
Gi0/1(d), Gi0/5(s)
None
None
None
None
None
None
None
None
None
78-16405-05
Hide quick links:
Advertisement
Table of Contents
