Table of Contents
Advertisement
2.
Disconnect the fan cable from the system board (2).
3.
Remove the three Phillips M2.0 × 3.0 screws (3) that secure the fan to the computer.
4.
Remove the fan (4) from the computer.
To install the fan, reverse this procedure.
Touchpad
To remove the touchpad, use this procedure and illustration.
Table 5-8
Touchpad descriptions and part numbers
Description
Touchpad
Touchpad cable
Before removing the touchpad, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the touchpad:
1.
Remove the protective tape (1) from the connector on the touchpad.
2.
Disconnect the touchpad cable from the ZIF connector (2) on the touchpad.
3.
Remove the three Phillips M2.0 × 2.0 screws (3) that secure the touchpad to the computer.
38
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page
30).
29).
Spare part number
N97737-001
N95998-001
29).
Advertisement
Table of Contents
