Features Of The Analog Module - Siemens SIMATIC S7-300 Getting Started
Hide thumbs
Also See for SIMATIC S7-300:
- Manual (676 pages) ,
- Reference manual (574 pages) ,
- Installation and operating manual (356 pages)
Table of Contents
Advertisement
Mechanical setup of the example station
4.2 Mounting of the analog module
4.2.4
Features of the analog module
Features
The module is a universal analog module that can be used with the most commonly used
applications.
The desired measuring mode should be set up directly on the module with the measuring
range modules.
● 8 inputs in 4 channel groups (each group with two inputs of same type)
● Measurement resolution adjustable for each channel group
● User-defined measuring mode per channel group:
● Programmable diagnostic interrupt
● Two channels with limit alarms (only channel 0 and channel 2 are configurable)
● Electrically isolated against backplane bus connection
● Electrically isolated against load voltage (exception: at least one measuring range module
Scope of supply of module SM331 (order no.: 6ES7331-7KF02-0AB0):
Components
Analog module SM331
Labeling strips
Bus connectors
2 cable ties (not in the picture above) to mount the external wiring
See also
Measuring range modules (Page 4-7)
4-6
– Voltage
– Current
– Resistor
– Temperature
is set to position D)
SM331;AI 8x12 Bit Getting Started Part 2: Voltage and PT100
Getting Started, 11/2006, A5E00264161-02
Advertisement
Table of Contents
