Table of Contents
Advertisement
Camera
Removing the Camera
1. Follow the procedure in
2. Remove the:
a.
Batteries
b.
Bottom chassis cover
c.
Memory
d.
WLAN card
e.
WWAN card
f.
PCIe heatsink assembly
g.
Docking port assembly
h.
Heatsink
i.
Hinge covers
j.
Display assembly.
k.
LCD Bezel and back cover assembly.
3. Peel off the reflective tape[1] on camera module and the insulation tape securing the EDP cable[2] to camera module.
4. Disconnect the EDP cable from the camera module [3] and remove the three 'M2*3' screws [4].
5. Lift the camera module away from the back cover [5] to remove it from the computer.
CAUTION:
Do not touch the Camera Lens fused to the LCD with bezel assembly.
Installing the Camera
1. Install the camera module [1] on the back cover and install the three 'M2*3'. screws [2]
2. Connect the EDP cable to the camera module [3], stick a piece of insulation tape [4] on the EDP connectors.
3. Secure the camera module on the back cover using a piece of reflective tape [5].
Before working inside your
computer.
Removing and installing components
109
Advertisement
Table of Contents
