Table of Contents
Advertisement
Before using for the first time
4. Starting the calibration pro-
gramme
For optimum water and energy con-
sumption and excellent wash results, it
is important to calibrate the washing
machine.
To do this, the Cottons programme
must be run without laundry and
without detergent.
Open the stopcock.
Turn the programme selector to the
Cottons position.
The washing machine is now switched
on and the temperature 40 and spin
speed 1400 light up.
Touch the Start/Add laundry sensor
control.
The wash programme will start.
After 10 minutes, the indicators dim.
20
Opening the door at the end of the
programme
The door remains locked during the anti-
crease phase. The control field lights up
for the first 10 minutes. The control field
then goes out and the Start/Add laun-
dry sensor control flashes.
Turn the programme selector to the
position.
appears on the timer display and
the indicator light goes out.
The door unlocks.
Tip: After the anti-crease phase, the
washing machine will have switched off
and the door unlocked automatically.
The control field will be completely dark.
Reach under the door grip and pull
the door open.
Tip: Leave the door slightly open to al-
low the drum to dry.
Initial commissioning is now complete.
Advertisement
Table of Contents
