Quick Commissioning - Siemens SITRANS L Compact Operating Instructions
Controllers with ultrasonic transducer inputs
Hide thumbs
Also See for SITRANS L:
- Operating instructions manual (269 pages) ,
- Compact operating instructions (106 pages) ,
- Application examples (11 pages)
Table of Contents
Advertisement
Note
Damping via commissioning wizard vs menu parameters
Upon successful completion of the wizard:
• Sensor damping is set on the supported sensor by wizard parameter "Response rate".
• All other damping (local display, current output, fieldbus) is set to zero (disabled).
To affect damping on a mA input, or to set further damping of the device outputs, use menu
parameter "Damping value" (per local display, current output, fieldbus), after completing the
wizard.
• Note that this additional damping will compound the effect of any damping set by
parameter "Response rate".
6.5.2.2
Quick commissioning
Quick commissioning wizards via HMI
Procedure
Quick commissioning wizard
The SITRANS LT500 provides several quick commissioning wizards that can be used for
various applications.
The initial wizard steps are common for all application types. Subsequent wizard parameters
will vary depending on the application you choose. For the purpose of documenting, three
separate lists follow. These lists include the wizard parameters available to commission each
application type (see links below).
1. From operation view, press
"Quick start" will display. Press
2. Press
view for each parameter.
In the wizard, when there is more than one parameter per step, press
configure each parameter, then press
3. Setup each measurement point to configure it for an application type (Level, Space,
Distance, Volume, Volume flow).
Subsequent wizard parameters will vary depending on the application you choose. See
links below to step you through the wizard appropriate to your application.
4. Select "Yes" to "Apply?". This confirms all parameter changes as the final step in the quick
commissioning wizard.
For a dual-point device, complete the wizard for the second measurement point, then press
"Exit" to return to parameter view.
5. Press
SITRANS LT500 with ultrasonic transducer inputs
Compact Operating Instructions, 02/2024, A5E52021877-AA
button to enter parameter view. The first level menu
button again to enter "Quick commissioning" wizard. Press
button two times to return to operation view.
button to enter this menu.
button to navigate to "Next" step.
Commissioning
6.5 Local commissioning
button to enter edit
button to
55
Advertisement
Table of Contents
