Heat Sink; Removing The Heat Sink (For Computers Shipped With Integrated Graphics Card) - Dell Latitude 5520 Service Manual
Hide thumbs
Also See for Latitude 5520:
- Owner's manual (111 pages) ,
- Setup and specifications (28 pages) ,
- Quick start manual (18 pages)
Table of Contents
Advertisement
Steps
1. Align the screw holes on the system fan with the screw holes on the palm-rest assembly.
2. Replace the two screws (M2x3) to secure the system fan to the palm-rest assembly.
3. Connect the system-fan cable to the connector on the system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Install the
microSD
card.
4. Install the
SIM
card.
5. Follow the procedure in
Heat sink
Removing the heat sink (for computers shipped with integrated
graphics card)
Prerequisites
1. Follow the procedure in
CAUTION:
The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to
cool before you touch it.
2. Remove the
SIM
card.
3. Remove the
microSD
4. Remove the
base
cover.
5. Remove the battery.
About this task
The following image indicates the location of the heat sink and provides a visual representation of the removal procedure.
50
Removing and installing components
After working inside your
before working inside your
card.
computer.
computer.
Advertisement
Table of Contents
