Table of Contents
Advertisement
Qosmio G40
TV output function
Problem
Display on TV is poor
No display
If you turn the computer off into Sleep Mode while the display is on TV,
the computer will select either the internal LCD or an external computer
CRT as the display device the next time is switched on.
i.LINK (IEEE1394) device
Problem
i.LINK device does not
function
10-24
Procedure
Check to ensure the television type is set
correctly your region - NTSC should be used for
the United States and Japan, while PAL should
be used for Europe.
Try adjusting the contrast and brightness controls
on the television.
Press the FN + F5 hot key in order to change the
display priority and ensure that it is not set for the
internal display panel only.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Procedure
Check that the cable connecting the external
device to the computer is firmly attached.
Check to ensure that power is being supplied to
the device and that the device is turned on.
Reinstall the drivers required for the device -
this can be achieved by clicking Start, Control
Panel, Hardware and Sound and then clicking
the Add Hardware icon at the left-hand side of
the screen and following the on-screen
instructions.
Restart the computer and the Windows
operating system to re-initialize the device.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
User's Manual
Advertisement
Chapters
Table of Contents
