Table of Contents
Advertisement
Setting the Schedule
— Schedule Menu
When you click Schedule on the Administrator menu,
the Schedule menu appears.
This is the same menu as the menu which is displayed
when you click Schedule to set Effective period and
Schedule in FTP client menu, e-Mail (SMTP) menu,
Image memory menu, Alarm out menu and so on.
Example: When setting e-Mail (SMTP) (the alarm
sending) in the Schedule menu
Schedule selection
Select the list box to specify the schedule you want to
set. e-Mail (SMTP) – Alarm, e-Mail (SMTP) –
Periodical, FTP – Alarm, FTP – Periodical, Image
memory – Alarm, Image memory – Periodical,
Alarm output – Alarm or Alarm output – Timer can
be selected.
Mon (Monday) to Sun (Sunday)
The time period on the right of the checked day is the
effective period of the schedule.
Start time, End time
Specify the Start time and the End time.
Use the same time schedule every day
When this is checked, the Start time and End time set
to Mon (Monday) are applied to all days. In this case,
the Start time and End time of the other days than Mon
(Monday) cannot be input.
OK/Cancel
See "Buttons common to every menu" on page 28.
Setting the Alarm Buffer
— Alarm buffer Menu
When you click Alarm buffer on the Administrator
menu, the Alarm buffer menu appears.
You can set the Pre-alarm image (the image before the
alarm detection) and the Post -alarm image. These can
be set when Alarm sending or Alarm recording of
FTP client menu or Image memory menu is set to On,
and besides when Use alarm buffer is selected.
Video mode
The Video mode setting in the Common tab of the
Camera menu is displayed.
MPEG4: Shows the present output format of the camera
is MPEG4.
JPEG: Shows the present output format of the camera is
JPEG.
Recording capacity
Displays the maximum recording capacity of alarm
buffer in the present camera setting of the Video mode,
image size, bit rate and frame rate.
Pre-alarm period: Displays the maximum recording
capacity of image before the alarm detection.
Post-alarm period: Displays the maximum recording
capacity of image after the alarm detection.
Recording time
Set the recording time for the Pre-alarm image and Post
alarm image.
Pre alarm period: Type the recording time of the image
before the alarm detection.
Post alarm period: Type the recording time of the
image after the alarm detection.
Setting the Schedule — Schedule Menu / Setting the Alarm Buffer — Alarm buffer Menu
55
Hide quick links:
Advertisement
Table of Contents
