Note
If the message for replacing the air filter
appears, replace, both air filters with new
ones to maintain the optimal performance
of the projector.
For details, see "Replacing the Air
Filters" on page 48.
i Ventilation holes (intake)
j Adjusters
Turn the appropriate adjuster to the right
or left for minor tilt adjustment of the
projected picture.
A Control Panel
A
For details, see "
B Power/Indicator
B
For details, see "
on page 14.
C Connector Panel
C
For details, see "
on page 15.
A
Control Panel
INPUT
1
SHIFT
ZOOM
2
MENU
3
a INPUT key
Select the input signal. Each time you
press the key the input signal switches.
b SHIFT key
Enters the H/V shift adjustment mode.
Next, adjust the vertical/horizontal
Control Panel".
Power Indicator"
Connector Panel"
4
FOCUS
5
ENTER
6
7
position of the picture using the arrow
keys. Press the V key to move the picture
upward. Press the v key to move it
downward. Press the B key to move it
leftward. Press the b key to move it
rightward.
Note
Do not perform the lens shift operation
when the optional lens VPLL-4008 is
attached to the projector because the
projector is installed with the center of the
lens aligned with the center of the screen.
c MENU key
Displays the on-screen menu. Press
again to clear the menu.
d ZOOM key
Enters the zoom adjustment mode. Next,
adjust the picture size using the arrow
keys. Press the V or b key to enlarge the
picture size, and the v or B key to reduce
it.
e FOCUS key
Enters the focus adjustment mode. Next,
adjust the focus using the arrow keys.
Press the V or b key to focus on a picture
further back, and the v or B key to focus
on a picture further forward.
The ZOOM and FOCUS keys cannot be
used when you attach the optional lens
VPLL-4008 to the projector.
f ENTER key
Used to enter the settings of items in the
menu system.
g V/v/B/b (Arrow) keys
Used to select a menu, or make various
adjustments.
Location and Function of Controls
13