Installing the battery
1. Insert the battery into the slot on the computer.
2. Connect the battery cable to the connector on the system board.
3. Connect the hard disk drive cable to the connector on the system board and close the latch.
4. Replace the four M2.0 x 3 screws to secure the battery to the system.
5. Install the
base
cover.
6. Follow the procedure in
Speaker
Removing the speaker
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
3. To remove the speaker:
a. Disconnect the speaker cable [1].
b. Unroute the cable from routing channel [2].
12
Removing and installing components
After working inside your
Before working inside your
computer.
computer.