Installing The System Board - Dell Latitude 3340 2-in-1 Service Manual
Hide thumbs
Also See for Latitude 3340 2-in-1:
- Setup and specifications (29 pages) ,
- Service manual (78 pages)
Table of Contents
Advertisement
2. Remove the display-cable bracket from the system board.
3. Remove the two screws (M2.5x4) that secure the right display hinge to the system board.
4. Lift the right display hinge in upward direction away from the system board.
5. Remove the screw (M2.5x4) that secures the USB type-C bracket to the system board.
6. Lift and remove the USB type-C bracket from the system board.
7. Disconnect the following cables from the respective connectors on the system board:
a. Touchpad cable
b. I/O board cable
c. Speaker cable
d. Fan cable
e. Display cable
f. Power adapter port cable
8. Remove the two screws (M2x2) that secure the system board to the palm-rest and keyboard assembly.
9. Lift and remove the system board from the palm-rest and keyboard assembly.
Installing the system board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the system board and provide a visual representation of the installation procedure.
52
Removing and installing components
Advertisement
Table of Contents
