Page 1
Refrigerator User Manual GNE60532DX 57 4196 0000/AA...
Page 2
Please read this manual before using the product! Dear Customer, We'd like you to make the best use of our product, which has been manufactured in modern facilities with care and meticulous quality controls. Thus, we advice you to read the entire user manual before you use the product. In case the product changes hands, do not forget to hand the guide to its new owner along with the product.
Safety and environment instructions This section provides the safety 1.1. General safety instructions necessary to prevent the risk This product should not be used by • of injury and material damage. Failure to persons with physical, sensory and observe these instructions will invalidate mental disabilities, without sufficient all types of product warranty.
Safety and environment instructions Do not use steam or steamed cleaning Do not step or lean on the door, • • materials for cleaning the refrigerator drawers and similar parts of the and melting the ice inside. Steam may refrigerator. This will cause the product contact the electrified areas and cause to fall down and cause damage to the short circuit or electric shock!
Safety and environment instructions there is no water hammer effect in your This product has been manufactured with high quality parts and materials installation. which can be reused and are suitable Do not install on the hot water inlet. • for recycling.
Refrigerator Frozen food storing compartments A- Cooler compartment Vegetable bins B- Freezer compartment Breakfast compartment Butter-cheese shelf Odour filter Cooler compartment shelves Adjustable glass shelves Shelter wire *Optional: Figures in this user guide are schematic and may not exactly match your product. If your product does not comprise the relevant parts, the information pertains to other models.
Installation 3.1. Right place for installation 3.2. Attaching the plastic wedges Use the plastic wedges provided with the product Contact the Authorized Service for the product's to provide sufficient space for air circulation installation. To ready the product for installation, between the product and the wall.
Installation 3.3. Adjusting the stands 3.5. Water connection If the product is not in balanced position, adjust the (Optional) front adjustable stands by rotating right or left. WARNING: Unplug the product and the water pump (if available) during connection. The product’s water mains, filter and carboy connections must be rendered by authorized service.
Installation 3.6. Connecting water 3.7. Connecting to water mains hose to the product (Optional) To connect the water hose to the product, To use the product by connecting to the cold water follow the instructions below. mains, a standard 1/2” valve connector must be 1.
Installation 4. Attach the connector into the faucet adaptor 2. Connect the other end of the water hose to and tighten by hand / tool. the water pump by pushing the hose into the pump’s hose inlet. 3. Place and fasten the pump hose inside the 5.
Installation 3.9.1. Fixing external filter 2. Determine the location to fix the external filter. on the wall (Optional) Fix the filter’s connecting apparatus (5) on the wall. WARNING: Do not fix the filter on the product. Check to see the following parts are supplied with your product’s model: 3.
Installation 3.9.2. Internal filter The internal filter provided with the product is not installed upon delivery; please follow the instructions below to install the filter. 1. “Ice Off ” indicator must be active while installing the filter. Switch the ON-OFF indicator using the “Ice”...
Page 14
Installation 4. Push the “Ice” button on the screen again to cancel the “Ice Off ” mode. The water filter will clear certain foreign particles in the water. It will not clear the microorganisms in the water. The filter replacement period of your product is 6 months.
Preparation 4.1. What to do for energy saving • Prevent direct contact between the temperature sensor in the freezer compartment Connecting the product to electronic and the food packages. Energy consumption energy-saving systems is harmful, as it may increase in case of a contact with the may damage the product.
Using the product 5.1. Indicator panel Indicator panels may vary depending on the model of your product. Audio and visual functions of the indicator panel will assist in using the refrigerator. Cooler compartment indicator Error status indicator Temperature indicator Vacation function button Temperature adjustment button Compartment selection button Freezer compartment indicator...
Page 17
Using the product 1. Cooler compartment indicator 6. Compartment selection button The cooler compartment light will turn on when Use the refrigerator compartment selection adjusting the cooler compartment temperature. button to toggle between the cooler and freezer compartments. ( ) 2.
Page 18
Using the product Indicator panel This touch-control indicator panel allows you to set the temperature without opening the door of your refrigerator. Just touch the relevant button with your finger to set the temperature. 6.2 6.1 1- High temperature / fault alert 2- Energy saving function (display off) 3- Rapid cooling 4- Vacation function...
Page 19
Using the product Push the vacation function button again to 1. High temperature / fault alert cancel this function This indicator ( ) will light up in case of 5. Cooler compartment temperature setting temperature faults or fault alerts.This indicator After pressing the button, the cooler compartment illuminates during power failure, high temperature temperature can be set to 8,7,6,5,4,3,2 and 1...
Page 20
Using the product 9. Freezer compartment temperature setting The temperature in the freezer compartment is ad- justable. Pressing the button will enable the freezer compartment temperature to be set at -18,-19, -20, -21, -22, -23 and -24. ( 10. Rapid freezing For rapid freezing, press the button;...
Page 21
Using the product 6.2 6.1 10.2 10.1 1. Freezer compartment temperature setting 2. Economy mode 3- Energy saving function (display off) 4. Error status 5. Cooler compartment temperature setting 6. Rapid cooling 7. Vacation function 8. Keypad lock / filter replacing alert cancellation 9.
Page 22
Using the product 1. Freezer compartment temperature setting 7. Vacation function Pressing the button ( ) will enable the freezer When the Vacation function ( ) is active, the compartment temperature to be set at -18,-19,- cooler compartment temperature indicator displays 20,-21 ,-22,-23,-24,-18...
Using the product 5.5. Description and The indicator will light up after 6 hours when the cleaning of odour filter auto eco function is active. ( ) 12. Rapid freezing (Optional) Press the button Odor filter prevents unpleasant odour build-up in your product.
Using the product 5.6. Telescopic drawer 5.7. Ionizer Pay attention not to squeeze any parts of your (Optional) body such as hands, feet and etc. between the The ionizer system in the cooler compartment’s air duct serves to ionize the air. The negative movable parts while the drawer is in use in order ion emissions will eliminate bacteria and other to avoid any injury.
Using the product 5.9. Movable middle section Movable middle section is intended to prevent the cold air inside your refrigerator from escaping outside. Sealing is provided when the gaskets on the door presses on the surface of the movable middle section while the cooler compartment doors are closed.
Using the product 5.11. Ice box 5.12. Ice maker Please read the warnings carefully on the ice con- The ice machine is nonremovable. There must be tainer. The ice container is used for ice collection ice container at the bottom of the ice machine. poured ice machine.
Using the product 5.13. Freezing fresh food • Mark each food pack by writing the date on the package before freezing. This will allow you to • To preserve food quality, the food items placed determine the freshness of each pack every in the freezer compartment must be frozen as time the freezer is opened.
Using the product 5.18. Interior light Boil the vegetables and filter the water to extend Interior light uses a LED type lamp. Contact the the frozen storage time. Place the food in air-tight authorized service for any problems with this lamp. packages after filtering and place in the freezer.
Maintenance and cleaning • Remove the door shelves by pulling Cleaning your fridge at regular intervals will them up. After cleaning, slide them extend the service life of the product. from top to bottom to install. • Never use cleaning agents or water that contain chlorine to clean the WARNING: outer surfaces and chromium coated...
Troubleshooting defrosting product. The defrosting is Check this list before contacting the service. carried out periodically. Doing so will save you time and money. This list includes frequent complaints that are not related to • The product is not plugged in. >>> faulty workmanship or materials.
Page 31
Troubleshooting • The doors were opened frequently or • The product may be set to kept open for long periods. >>> Do not temperature too low. >>> Set the open the doors too frequently. temperature to a higher degree and • The door may be ajar.
Page 32
Troubleshooting • The door may be ajar. >>> Fully close If The Surface Of The Product Is Hot. • High temperatures may be observed the door. between the two doors, on the side There is condensation on the product’s panels and at the rear grill while exterior or between the doors.