Summary of Contents for Siemens SIMATIC NET SCALANCE W M763-1 Series
Page 1
SCALANCE WxM766-1 SCALANCE WxM763-1 SIMATIC NET Industrial Wireless LAN Approvals SCALANCE W700 802.11ax Reference Manual 04/2023 C79000-G8976-C621-05...
Page 2
Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
Table of contents SCALANCE WxM766-1..........................7 Type designations ........................ 7 EC declaration of conformity ....................7 1.2.1 ATEX............................ 8 1.2.2 RoHS ........................... 8 1.2.3 RED ............................. 9 1.2.3.1 Protection of health and safety ..................... 9 1.2.3.2 EMC............................. 9 1.2.3.3 Efficient use of the radio spectrum ..................10 1.2.4 Other technical standards ....................
Page 4
Table of contents 2.3.3 Radio Equipment Regulations 2017 ..................41 2.3.3.1 Protection of health and safety ................... 41 2.3.3.2 EMC........................... 41 2.3.3.3 Efficient use of the radio spectrum ..................42 2.3.4 Other technical standards ....................42 Supplier’s declaration of conformity ................... 43 General approvals ......................
Page 5
Current approvals on the Internet You will find the current approvals for the product on the Internet pages of Siemens Industry Online Support (https://support.industry.siemens.com/cs/ww/en/ps/28575/cert). Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems, machines and networks.
SCALANCE WUM766-1 MSAX65-W1-M12-E2 6GK5766-1GE00-3DA0 6GK5766-1GE00-3DB0 (US) 6GK5766-1GE00-3DC0 (ME) EC declaration of conformity The EC Declaration of Conformity is available for all responsible authorities at: Siemens Aktiengesellschaft Digital Industries Process Automation DE-76187 Karlsruhe Germany Approvals SCALANCE W700 802.11ax Reference Manual, 04/2023, C79000-G8976-C621-05...
SCALANCE WxM766-1 1.2 EC declaration of conformity You can find the current EU declaration of conformity for these products on the Internet pages under Siemens Industry Online Support (https:// support.industry.siemens.com/cs/ww/en/ps/28575/cert). The SIMATIC NET products described in this document meet the requirements of the following EU directives: •...
SCALANCE WxM766-1 1.2 EC declaration of conformity 1.2.3 1.2.3.1 Protection of health and safety Article 3 (1) a) protection of health and safety EN IEC 62368-1 Equipment for audio, video, information and communication technology - Part 1: Safety requirements EN IEC / IEC 62311 Assessment of electronic and electrical equipment related to human exposure re‐...
SCALANCE WxM766-1 1.2 EC declaration of conformity EN 61000‑6‑2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments EN 61000‑6‑3 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments EN 61000‑6‑4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments...
SCALANCE WAM 766-1 EEC 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25, 26,27,28 SCALANCE WUM 766-1 1,2,3,4,5,6,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26, 27,28 UK Declaration of Conformity The UK declaration of conformity is available to all responsible authorities at: Siemens Aktiengesellschaft Digital Industries Process Automation DE-76187 Karlsruhe Germany Importer UK: ...
SCALANCE WxM766-1 1.3 UK Declaration of Conformity You can find the current UK Declaration of Conformity for these products on the Internet pages under Siemens Industry Online Support (https:// support.industry.siemens.com/cs/ww/en/ps/28575/cert). The SIMATIC NET products described in this document meet the requirements of the following directives: •...
SCALANCE WxM766-1 1.3 UK Declaration of Conformity 1.3.3 Radio Equipment Regulations 2017 1.3.3.1 Protection of health and safety Article 3 (1) a) protection of health and safety EN IEC 62368-1 Equipment for audio, video, information and communication technology - Part 1: Safety requirements EN IEC 62311 Assessment of electronic and electrical equipment related to human exposure re‐...
SCALANCE WxM766-1 1.3 UK Declaration of Conformity EN 61000‑6‑2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments EN 61000‑6‑3 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments EN 61000‑6‑4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments...
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25, 26,27,28 SCALANCE WUM766-1 1,2,3,4,5,6,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26, 27,28 Supplier’s declaration of conformity The RCM declaration of conformity is available to all responsible authorities at: Siemens Aktiengesellschaft Digital Industries Process Automation DE-76187 Karlsruhe Germany Approvals SCALANCE W700 802.11ax Reference Manual, 04/2023, C79000-G8976-C621-05...
SCALANCE WxM766-1 1.5 General approvals You can find the current Supplier's declaration of conformity for these products on the Internet pages under Siemens Industry Online Support (https:// support.industry.siemens.com/cs/ww/en/ps/28575/cert) As required by the following Notices: • Radiocommunications (Compliance Labelling - Devices) Notice 2014 made under section 182 of the Radiocommunications Act 1992;...
Page 17
II 3G Ex ec IIC T4 Gc DEKRA 18ATEX0026 X DEKRA 21UKEX0002 X IECEx DEK 18.0018X Importer UK: Siemens plc, Manchester M20 2UR, UK (Ex ec IIC T4 Gc, not on the nameplate) The product meets the requirements of the standards: •...
Page 18
SCALANCE WxM766-1 1.5 General approvals The product meets the requirements of the standards: • Factory Mutual Approval Standard Class Number 3611 / 3600 / 3810 / ANSI ISA-61010-1 • FM Hazardous (Classified) Location Electrical Equipment: Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and Non Incendive / Class I / Zone 2 / Group IIC / T4 cULus Approval for Information Technology Equipment cULus Listed I.
Page 19
1.5 General approvals ___________________________________________________________________________ Notice Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to operate this equipment. ___________________________________________________________________________ IEEE 802.11b or g operation of this product in the USA is firmware-limited to channels 1 through 11.
Page 20
SCALANCE WxM766-1 1.5 General approvals antena de 14.2 dBi. Con este equipo no está permitido usar antenas que no figuren en las instrucciones de servicio o tengan una ganancia de más de 14.2 dBi. La impedancia requerida de la antena es de 50 Ω. RSS-247 of Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s).
All countries or frequency ranges in which only time-limited approval applies are marked with the rhombus symbol (♦). This marking is for information purposes. Time-limited approvals are usually extended by Siemens in the time between delivery release and product phase-out of the devices.
Page 22
SCALANCE WxM766-1 1.6 National approvals Country Mode Max. permitted (EIRP) gain Albania 11ax 11g 11n 2412 100 mW Indoor + Outdoor Andorra Austria 2472 Belgium 11a 11ac 11ax 5180 200 mW 11 dBi (2 Tx) Indoor only Bosnia and Herzegovina Bulgaria 14 dBi (1 Tx) Croatia 5240...
Page 34
SCALANCE WxM766-1 1.6 National approvals Maximum permissible gain: Antenna and additional attenuation elements When using antennas with a very high antenna gain, the maximum permitted EIRP (equivalent isotropic radiated power) of the device is often exceeded even at minimum transmit power. Additional attenuation elements must therefore be used between the device and the antennas.
Siemens Aktiengesellschaft Digital Industries Process Automation DE-76187 Karlsruhe Germany You can find the current EU declaration of conformity for these products on the Internet pages under Siemens Industry Online Support (https:// support.industry.siemens.com/cs/ww/en/ps/28575/cert). Approvals SCALANCE W700 802.11ax Reference Manual, 04/2023, C79000-G8976-C621-05...
SCALANCE WxM763-1 2.2 EC declaration of conformity The SIMATIC NET products described in this document meet the requirements of the following EU directives: • ATEX directive 2014/34/EU Directive of the European Parliament and the Council of 26 February 2014 on the approximation of the laws of the member states concerning equipment and protective systems intended for use in potentially explosive atmospheres, official journal of the EU L96, 29/03/2014, pages 309–356...
SCALANCE WxM763-1 2.2 EC declaration of conformity 2.2.3 2.2.3.1 Protection of health and safety Article 3 (1) a) protection of health and safety EN IEC 62368-1 Equipment for audio, video, information and communication technology - Part 1: Safety requirements EN IEC / IEC 62311 Assessment of electronic and electrical equipment related to human exposure re‐...
SCALANCE WxM763-1 2.2 EC declaration of conformity EN 61000‑6‑2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments EN 61000‑6‑3 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments EN 61000‑6‑4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments...
(Page 37). Product Standards SCALANCE WAM763-1 1,2,3,4,5,6,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27, SCALANCE WUM763-1 1,2,3,4,5,6,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27, UK Declaration of Conformity The UK declaration of conformity is available to all responsible authorities at: Siemens Aktiengesellschaft Digital Industries Process Automation DE-76187 Karlsruhe Germany Importer UK: Siemens plc,...
SCALANCE WxM763-1 2.3 UK Declaration of Conformity You can find the current UK Declaration of Conformity for these products on the Internet pages under Siemens Industry Online Support (https:// support.industry.siemens.com/cs/ww/en/ps/28575/cert). The SIMATIC NET products described in this document meet the requirements of the following directives: •...
SCALANCE WxM763-1 2.3 UK Declaration of Conformity 2.3.3 Radio Equipment Regulations 2017 2.3.3.1 Protection of health and safety Article 3 (1) a) protection of health and safety EN IEC 62368-1 Equipment for audio, video, information and communication technology - Part 1: Safety requirements EN IEC 62311 Assessment of electronic and electrical equipment related to human exposure re‐...
SCALANCE WxM763-1 2.3 UK Declaration of Conformity EN 61000‑6‑2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments EN 61000‑6‑3 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments EN 61000‑6‑4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments...
Siemens Aktiengesellschaft Digital Industries Process Automation DE-76187 Karlsruhe Germany You can find the current Supplier's declaration of conformity for these products on the Internet pages under Siemens Industry Online Support (https:// support.industry.siemens.com/cs/ww/en/ps/28575/cert) Approvals SCALANCE W700 802.11ax Reference Manual, 04/2023, C79000-G8976-C621-05...
"SIMATIC NET Product Information Use of subassemblies/modules in a Zone 2 Hazardous Area". You will find this document • on the Internet pages under Siemens Industry Online Support (https:// support.industry.siemens.com/cs/ww/en/view/78381013). Approvals SCALANCE W700 802.11ax...
Page 45
II 3G Ex ec IIC T4 Gc DEKRA 18ATEX0026 X DEKRA 21UKEX0002 X IECEx DEK 18.0018X Importer UK: Siemens plc, Manchester M20 2UR, UK (Ex ec IIC T4 Gc, not on the nameplate) The product meets the requirements of the standards: •...
Page 46
___________________________________________________________________________ Notice Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to operate this equipment. ___________________________________________________________________________ IEEE 802.11b or g operation of this product in the USA is firmware-limited to channels 1 through 11.
SCALANCE WxM763-1 2.6 National approvals be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. •...
Page 48
SCALANCE WxM763-1 2.6 National approvals The current status of the approvals can be found on the Internet at the following address: Approvals (https://www.siemens.com/wireless-approvals). Column Meaning Country Country Mode IEEE 802.11 standard and the DFS functionality, where required IEEE 802.11 channel IEEE 802.11 frequency...
Page 49
SCALANCE WxM763-1 2.6 National approvals Country Mode Max. permitted (EIRP) gain Albania 11ax 11g 11n 2412 100 mW Indoor + Outdoor Andorra Austria 2472 Belgium 11a 11ac 11ax 5180 200 mW 11 dBi (2 Tx) Indoor only Bosnia and Herzegovina Bulgaria 14 dBi (1 Tx) Croatia 5240...
Page 50
SCALANCE WxM763-1 2.6 National approvals Country Mode Max. permitted (EIRP) gain Russian Federation 11g 11n 2412 100 mW Indoor + Outdoor 2472 11a 11ac 11ax 5180 200 mW Indoor only 5320 5660 200 mW Indoor only 5720 11a 11ac 11ax 5745 200 mW Indoor only 5825...
Page 52
SCALANCE WxM763-1 2.6 National approvals Example The antenna ANT793-8DL is used. • Typical antenna gain: 14 dBi • Maximum permissible gain for channel 36 in Germany: 11 dBi In this case the typical antenna gain exceeds the maximum permissible gain by 3 dBi. This means you must use an attenuation element with at least 3 dB.