Replacing The Processor Module - Dell XPS L502X Service Manual
Hide thumbs
Also See for XPS L502X:
- Setup manual (112 pages) ,
- Service manual (110 pages) ,
- Service manual (56 pages)
Table of Contents
Advertisement
CAUTION:
The oils in your skin can reduce the heat transfer capability of the thermal pads.
CAUTION:
11. Lift the processor module off the ZIF socket.
Replacing the Processor Module
NOTE:
If a new processor module is installed, you will receive a new thermal cooling assembly, which will include an affixed thermal pad, or you will
receive a new thermal pad along with documentation to illustrate proper installation.
1. Follow the instructions in
2. Align the pin-1 corner of the processor module with the pin-1 corner of the ZIF socket.
NOTE:
The pin-1 corner of the processor module has a triangle that aligns with the triangle on the pin-1 corner of the ZIF socket.
3. Place the processor module lightly in the ZIF socket and ensure that the processor module is positioned correctly.
CAUTION:
4. Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the system board.
5. Replace the heat sink (see
6. Follow the instructions from
7. Replace the display assembly (see
8. Replace the keyboard (see
9. Replace the palm-rest assembly (see
10. Replace the memory module(s) (see
11. Replace the module cover (see
12. Replace the battery (see
CAUTION:
result in damage to the computer.
Back to Contents Page
Great user manuals database on
To ensure maximum cooling for the processor module, do not touch the heat transfer areas on the processor thermal-cooling assembly.
When removing the processor module, pull the module straight up. Be careful not to bend the pins on the processor module.
Before You
Begin.
To avoid damage to the processor module, hold the screwdriver perpendicular to the processor module when turning the cam screw.
Replacing the Heat
Sink).
step 8
to
step 11
in
Replacing the Top
Replacing the Display
Replacing the
Keyboard).
Replacing the Palm-Rest
Replacing the Memory
Replacing the Module
Replacing the
Battery).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
UserManuals.info
Cover.
Assembly).
Assembly).
Module(s)).
Cover).
Advertisement
Table of Contents
