Table of Contents
Advertisement
Before removing the WLAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the accessory cover (see
Remove the WLAN module:
1.
Disconnect the WLAN antenna cables (1) from the WLAN module.
NOTE:
white WLAN antenna cable is connected to the WLAN module "Aux" terminal.
2.
Remove the two Phillips PM2.0×4.0 screws (2) that secure the WLAN module to the computer.
(The edge of the module opposite the slot rises away from the computer.)
3.
Remove the WLAN module (3) by pulling it away from the slot at an angle.
NOTE:
module slot.
Reverse this procedure to install a WLAN module.
Memory module
Description
2048-MB memory module (667-MHz, PC2-6400, 1-DIMM)
1024-MB memory module (667-MHz, PC2-6400, 1-DIMM)
512-MB memory module (667-MHz, PC2-6400, 1-DIMM)
Battery on page
The black WLAN antenna cable is connected to the WLAN module "Main" terminal. The
WLAN modules are designed with a notch (4) to prevent incorrect insertion into the WLAN
54).
Hard drive on page
59).
Spare part number
480382-001
480381-001
480380-001
Component replacement procedures
67
- Quick Links:
- Product Description
Hide quick links:
Advertisement
Table of Contents
