Table of Contents
Advertisement
Modem module cable
NOTE:
The modem module cable is included in the Cable Kit, spare part number 480474-001. The
modem module cable includes the RJ-11 jack.
Before removing the modem module cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Switch cover (see
d.
Keyboard (see
e.
Speaker assembly (see
f.
Display assembly (see
g.
Top cover (see
h.
System board (see
Remove the modem module cable:
1.
Remove the RJ-11 jack (1) from the clip built into the base enclosure.
2.
Remove the modem module cable (2) from the clips and routing channel built into the
base enclosure.
Reverse this procedure to install the modem module cable.
Battery on page
54).
Hard drive on page
59)
Optical drive on page
Switch cover on page
Keyboard on page
71)
Speaker assembly on page
Display assembly on page
Top cover on page
85)
System board on page
57)
69)
75)
76)
94)
Component replacement procedures 103
- Quick Links:
- Product Description
Hide quick links:
Advertisement
Table of Contents
