Touchpad Button Board - HP G62-373 Maintenance And Service Manual
Notebook pc
Hide thumbs
Also See for G62-373:
- Maintenance and service manual (135 pages) ,
- User manual (126 pages)
Table of Contents
Advertisement
Removal and replacement procedures
Touchpad button board
Description
Touchpad button board
Before removing the touchpad button board:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive (see
6. Remove the memory module (see
7. Remove the wireless module (see
8. Remove the optical drive (see
9. Remove the keyboard (see
10. Remove the top cover (see
Remove the touchpad button board:
1. Remove the two Phillips PM2.0×3.0 screws 1 that secure the touchpad button board to the top cover.
2. Lift up and remove the touchpad button board 2.
Reverse this procedure to install the touchpad button board.
4–24
"Battery" on page
4-7).
"Hard drive" on page
"Memory module" on page
"Wireless module" on page
"Optical drive" on page
"Keyboard" on page
4-17).
"Top cover" on page
4-8).
4-10).
4-12).
4-14).
4-20).
Spare part number
595203-001
Maintenance and Service Guide
Advertisement
Table of Contents
