Table of Contents
Advertisement
Reverse this procedure to install the speakers.
Display assembly
NOTE:
The display assembly spare part kit includes a display panel cable, webcam/microphone
module and cable, 2 WLAN antenna cables and transceivers,and 2 WWAN antenna cables and
transceivers.
Description
14.5-in, LED, HD, AntiGlare, flush glass SVA display assembly for use only on Beats Edition
computer models
14.5-in, LED, HD, AntiGlare, flush glass SVA display assembly for use only on standard computer
models
14.5-in, LED, HD+, AntiGlare, flush glass WVA display assembly for use only on standard
computer models
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery cover and battery (see
5.
Remove the memory module/wireless module compartment cover (see
on page
6.
Remove the top cover (see
Remove the display assembly:
1.
Close the computer.
2.
Turn the computer upside down, with the front toward you.
3.
Disconnect the wireless antenna cables (1) from the WWAN and WLAN modules.
4.
Release the wireless antenna cables from the routing clips (2) built into the base enclosure.
5.
Release the grounding tape (3) that secures the WWAN antenna cables to the base enclosure.
70
Chapter 4 Removal and replacement procedures
41).
Top cover on page
Battery on page
34).
50).
Spare part number
619399-001
616270-001
608366-001
WLAN module
Advertisement
Table of Contents
